Be sure to comment if you guys have any questions! A like and a sub would be awesome as well! Thank you!

Wonderful explanation and the detail of what the angles do. Thank you!!

Best explanation of the layout so far.

@bowlersvault

11 ай бұрын

Thank you sir!!!

Thank you sir that was very helpful. Now I need to find pap

Athery's chart is a useful tool for determining ballpark values for a given set of bowler metrics in the dual angle layout system. In a very real sense, this chart is the foundation of the system. This basically allows you to easily and consistently calculate the median or "benchmark" layout for a given bowler style, on a typical house shot. All other layouts originate from this initial calculation. Note: on symms, the distance from the center of thumbhole to the PIN is a significant variable. 6.75" is minimum RG and max diff. All other values increase the RG of the X-axis and consequently reduce total diff.

@bowlersvault

11 ай бұрын

good to use for people getting their feet wet into experimentation of layouts! Definitely would recommend for beginner and intermediate bowlers!

@StephRenee812

4 ай бұрын

Never hears if it

Can you also show how the ball react on the lane after drilling your layout. It would be easier to understand how a ball roll when you do a specific layout.

@bowlersvault

11 ай бұрын

I understand where you are coming from, however I do not see the value in showing what it looks like after creating a layout video. Everyone throws it differently, factors of the house/lanes, etc. If it were to be a comparison video, then absolutely whether that be a comparison between bowling balls or layouts. Having me throw a ball after I drill it up during a layout video wouldn’t do any justice. Sure, it will give you a decent look, but not to the entirety that it needs to be to fully push the concept. If you wish to see how a ball rolls after a layout, I recommend watching Storm’s Pin Buffer video series. There are three parts to the series, and each video explains how different pin-to-paps, psa-to-paps (in this case because it’s a dual angle video it would be called the Drilling Angle), and pin buffers (in this case it would be the VAL angle because of Dual Angle) look with three different drilling patterns.

Can you do a video on laying out a ball for a two handed bowler or is it basically the same ..thanks

@bowlersvault

6 ай бұрын

i will post a two handed layout video soon!

@hawserdog2

6 ай бұрын

Great that's ...my son is a two handed bowler and people are telling him that his balls are layed out wrong and it got into his head so I want to make sure and show him the video when yo post it ...thanks again

@bowlersvault

6 ай бұрын

@@hawserdog2 definitely. Be sure to sub and turn the post notifications bell so you know when I upload it! Should be sometime this week!

Hi. Is there an advantage in drilling using the dual angle or standard drilling?

@bowlersvault

9 ай бұрын

Hi Martez, I am not too sure what you mean by standard drilling. Feel free to expand on that. I am assuming you mean putting the pin above the bridge or pushing the pin to the right of the ring finger (for right handed players). Basically your two “standard” layouts. There is a huge advantage using dual angle. You can fine tune the ball 10x more for players or yourself. I would recommend using some type of layout system in order to drill the ball the way you want the motion to look. Again, it’s more of a fine tuner.

What is that thing in the background i guess u sit the ball in it?

@bowlersvault

4 ай бұрын

I use it to find bowler’s PAPs