How to Laser Engrave Anything with the xTool D1 Laser Cutter/Engraver
Learn how to laser engrave with the Makeblock xTool Laser cutter & engraver.
Use Code: CC10 for 10% Off (Limited time only)
🔥 xTool Black Friday Sales & Cyber Monday Sales (ends on Nov 30th PT)
👉 xTool S1 NEW Diode Laser
US Store: bit.ly/48RUUO9 ($200 off $2299, CODE: XTCUT200)
UK Store: bit.ly/46UVSqV
EU Store: bit.ly/46k7VNE
I recommend THIS updated 20W xTool Laser Bundle 👇
US: bit.ly/20WBundle
UK: bit.ly/xTool-20W-UK
EU: bit.ly/xTool-20W-EU
👉 xTool F1
US Store: bit.ly/3uaPs8Y ($150 off $1699, CODE: XTCUT150)
UK Store: bit.ly/47BxA5O
EU Store: bit.ly/46k7VNE
👉 xTool P2:
US Store: bit.ly/47m6H6c ($250 off $2999, CODE: XTCUT250)
UK Store: bit.ly/3FY9Woh
EU Store: bit.ly/3R2dtZ1
👉 Save Money with this 10 Watt Bundle
US: bit.ly/10WBudgetD1
UK: bit.ly/UK10WxTool
EU: bit.ly/EU10WBundle
🔥 The NEW 55W P2 C02 Laser:
US: bit.ly/xToolUSLaser-P2
UK: bit.ly/xToolUKLaser-P2
EU: bit.ly/xToolEU-Laser-P2
xTool Accessories
👉 xTool Air Assist: bit.ly/xToolD1AirAssist
👉 xTool Honeycomb Panel for Cutting: bit.ly/xToolHoneyCombGrid
👉 RA2 Pro Rotary Attachment: bit.ly/RA2ProD1
👉 All xTool Products (Use this if the above links do not work)
www.xtool.com/?ref=GJ3shtoLyJ...
Power/Speed test for Laserbox on the D1: drive.google.com/drive/folder...
• Get my FREE Woodcarving eBook ➡ howtowoodcarve.com
• Woodcarving Project Idea Guide eCourse: corneliuscreations.gumroad.co...
• Carving Templates: www.howtowoodcarve.com/shop
• Join this channel to get access to different perks and behind the scenes videos:
/ @corneliuscreations
🔔 SUBSCRIBE HERE: ► KZread: bit.ly/2mEWLQk
Soundstripe ID: TL0P79DSNXYEQVXA
Follow:
►FACEBOOK: / cornelius. .
► INSTAGRAM: / cornelius_cr. .
► KZread: bit.ly/2mEWLQk
🔔 Subscribe : KZread: bit.ly/2mEWLQk
#xtool #laserengraving #lasercutting
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.”
"Cornelius Creations holds an affiliation with Makeblock Xtool Laser cutters & engravers"
🔔 Subscribe : KZread: bit.ly/2mEWLQk
Пікірлер: 276
🔥 xTool Black Friday Sales & Cyber Monday Sales (ends on Nov 30th PT) 👉 xTool S1 NEW Diode Laser US Store: bit.ly/48RUUO9 ($200 off $2299, CODE: XTCUT200) UK Store: bit.ly/46UVSqV EU Store: bit.ly/46k7VNE I recommend THIS updated 20W xTool Laser Bundle 👇 US: bit.ly/20WBundle UK: bit.ly/xTool-20W-UK EU: bit.ly/xTool-20W-EU 👉 xTool F1 US Store: bit.ly/3uaPs8Y ($150 off $1699, CODE: XTCUT150) UK Store: bit.ly/47BxA5O EU Store: bit.ly/46k7VNE 👉 xTool P2: US Store: bit.ly/47m6H6c ($250 off $2999, CODE: XTCUT250) UK Store: bit.ly/3FY9Woh EU Store: bit.ly/3R2dtZ1
@TBKFACTORY.
Ай бұрын
dear, are you interested in TBK laser machine? that must be nice
I am new to this product and found it exceptionally helpful. I've watched others re: set up of the new unit including the build and you are heads above the rest. You said it's a long video, I find it to be the most informative and I appreciate you covering all the bases.
It's a cool gadget and I wouldnt mind it but its things like this that takes out the soul of working with wood - I like when things aren't 100% prefet, when things arent looking the same, when someone put a lot of work and love in it
Thank you thank you thank you Matt!!! I have been waiting for this video for two months since I receive my XTool D1 and F1. My software was part of the demo stage and they have definitely upgraded it. I greatly appreciate your video and now I feel more confident. Thank you very much.
@CorneliusCreations
7 ай бұрын
Glad it helped!
@hananshaltaf6381
2 ай бұрын
Hi my name is hana,trying to buy and be trained on this machine.is it easy?
What a great video with a positive message. I’ve just bought an xTool D1 pro and thought what the heck I’ll get all the accessories! Just working it out now. I must admit, as a total fresher there’s a lot of trial and error required. So appreciate these kinds of instructional and ideas videos.
@melodyk.4612
Жыл бұрын
I'm also new to this. Curious, have you figured out how to center the laser??
This video is what I needed!!! Can't wait to try it out. Thank you so much for taking the time to showi us.
@CorneliusCreations
7 ай бұрын
You are so welcome!
Awesome video , thank you for all the info can't wait to see more on how to use ImagR for pictures.
Thanks for this detailed video! I’m going to finally unbox mine tomorrow. I really appreciate you providing us with the settings you used, so helpful.
@CorneliusCreations
Жыл бұрын
Glad you enjoyed it!
@christopherfigueroa3083
Жыл бұрын
@@CorneliusCreations Can it do Cups that are not perfectly cilinder? like cups going from shorter in diameter bottom to bigger in diameter top?
@Messorem6
Жыл бұрын
@@christopherfigueroa3083 It can, however, not with one image. You would have to do the top part then reset and do the bottom part.
@jakerazmataz852
Жыл бұрын
@@christopherfigueroa3083 I know this is an old comment, but go to 9.45 he gives a good demo. kzread.info/dash/bejne/p6yLktukmbioc9o.html
It’s always great to see a fellow creative champion & encourage others to make their mark! Maybe a small pun intended, lol…FANTASTIC videos & now I completely want one! Btw, by any chance do you have a separate photography channel?
TY for the video. Your video is professionally done and you are very articulate and make it fun to watch. Keep up the great work. Big Fan.
@CorneliusCreations
Жыл бұрын
Wow, thank you! This is one of the best compliments I could have received! Thank you!
@celiaquezada1524
Жыл бұрын
I can't my xtool d1 to hook up to the laserbox software.
@Partnerthedog
2 ай бұрын
@@CorneliusCreationsdoes it work on silver
thank you for sharing the knowledge and experence.. much appreciated
Awesome video. Straight forward and very informative.
@CorneliusCreations
Жыл бұрын
Glad you enjoyed it!
I run a laser engraver for a lot of stuff at my job and I've always said it would be cool to have one at home, I need one of these! 😂
@CorneliusCreations
Жыл бұрын
Haha they are fun!
I was on the fence for the whole laser idea. But after your video and the release of the 20 watt laser, I’m buying a 20w tomorrow!
@CorneliusCreations
Жыл бұрын
So glad you enjoyed the video! Congrats!
It is such a good laser. A great tool to any creatives tool set!
Wow great video, unfortunately I already bought it so I could not use the link but once I am ready for the additions I will. Thank you for the work yo've done.
Your right! I'm buying one for sure now!!!! ha. Great video.
@CorneliusCreations
Жыл бұрын
Glad you enjoyed the video. I love my laser a little more everyday!
Great video and explanations. I have a graphic and 3d design background and am really thinking of getting this to complement my 3d printing. Thanks for the video
@CorneliusCreations
Жыл бұрын
My friend 3d prints. After seeing my laser he said he wants to switch 😁
@Spirited282
Жыл бұрын
@@CorneliusCreations haha awesome. Well i have a fdm and 2 resin printers so will not switch completely but the laser tool is impressive
@CorneliusCreations
Жыл бұрын
I think it will be a cool tool in your arsenal!
All this was done on a 10w? Nice! I just got a 10w from Comgrow and it's running well. I hope to get a 20w D1 Pro in Ironman Red one day..
Instead of using paint thinner (which is chemically designed to thin oil based paints), you should be using acetone for spray paints where they are ether based. Plus, you wash off the waste into a plastic or metal container, not down your drain where it will pollute your water system (either town water or your water table if you have a leach field).
Love your video! Newbie question, how do you know which surface requires a coat of paint/lacquer before etching?
This was great man! What were the settings you honed in to get the Ray Liotta image??
Looking good, dude!
@CorneliusCreations
Жыл бұрын
Thank you bro!
Matt I also have a question about how to get my business started with the XTool laser. Any ideas? And how did you know that the hammer that you engraved would sell for about $40?
Like the video and hope you come out with more for the d1 pro
@CorneliusCreations
Жыл бұрын
Thank you! I have one in the works!
On the portrait did you change the grayscale? Or just steering you show on the video? Thank you for your tips!
Can I ask where you got the mason jar from? I've been trying to find round jars but all I can find is the jars with beveled edges (more like an octagon shape)
Thanks for your video, I'm thinking about get one of this laser machine. Could you tell me why did you paint the mason jar and them took the paint off?
hi there im enjoying your videos alot but was wondering would it not be better to use water based paint as it would be easier to wash off?
big job man
What is the difference between the default blue laser and the xTool 21064nm infra red laser? They quote that the infra red laser is used to engrave metals and similar materials. But you can do that with the blue one too. Does it just work a lot better?
Do you recommend air ventilation or if I use in garage, I should not be worried? Do I need air assist also with this laser engraver? Thanks
What did you do to get the picture of Ray Liotta to turn out well. I'm trying photos but I'm having a difficult getting them to work properly
Can this cut a few millimetres deep into Lino? Specifically lino used for Lino prints? Shopping for a machine that can and would love to know if this has been tested with Lino.
Do you like laserbox software better than xtool creative? I’m also trying to get lightburn to work with my xtool d1pro 20w.
Great video. Thank you.
@CorneliusCreations
25 күн бұрын
Glad you liked it!
Where do you source your slate tiles? Brad/model/link of your dust collector??
Great video, thank you! Would you happen to know if there is a setting for the framing speed in either the Laserbox software, or in Creative Space? My wife's Xtool D1 10w works great, but the framing is so fast, it's hard to tell where exactly the edges will be. In your video, the framing process was much slower than ours is. We have the latest firmware, and the latest software updates. Thank you!
@Messorem6
Жыл бұрын
There is a framing speed option in Laserbox
@CorneliusCreations
Жыл бұрын
Glad you enjoyed it! Once you get to the framing menu there is a setting to slow it down so you can see!
Great video I’m thinking about buying one
@CorneliusCreations
Жыл бұрын
They are fun machines!
Super cool!!! I wanna play with it!!!
@CorneliusCreations
Жыл бұрын
It is a blast!
What prepping did you have to do for wood portraits?
Instead of using a masking paint that requires thinner or acetone to remove try using water washable tempera paint. Some people brush it on but I invested less than $100 on a Harbor Freight airbrush compressor/air brush set. Apply the tempera paint, let it dry, engrave your image and wash it off with water. That simple!
@CorneliusCreations
Жыл бұрын
Fantastic advice, Thank you!
Which would you recommend for a newbie to get best deal today on cyber Monday?
What a great tool
@CorneliusCreations
11 ай бұрын
It’s pretty fun!!
I am struggling to learn lightburn maybe I should try laserbox instead. One problem I am having is I think because there are to limit switches on the d1 it seems to slam into the outer edges and makes a awful noise when that happens. My question is how do I stop that from happening. Appreciate your encouraging video
@BitSmythe
10 ай бұрын
Home first. Then learn about where to start the job; current position vs exact dimensions. Also be aware of start location (the 9 dot grid). If you’re starting at top left and you’re engraving “selected items” they must be at that edge of your on screen project. In other words, if you have vertically, A, B, C and are only engraving B and C, it will skip the location of A even though you’re not outputting it. Also if you have the Blue laser head (with red crosshairs) make sure the Offset is on, for the IR head, it should be off. There are some great tutorials available. www.youtube.com/@TheLouisianaHobbyGuy this guy is good, but has the remarkable ability to take a strong five minute video and stretch it out to twenty. Loves to hear himself talk, but has lots of good info.
Hi, does the 20W laser module be able to engrave silver?
Thank you! I will probably buy this! Do you know if this can be used inside @120v? Thanks
@CorneliusCreations
Жыл бұрын
You will love it! I think it can. You can do a support chat to make sure!
How did you detect the d1 on laserbox? It’s looking for the laser box machine when I installed laserbox and trying to detect the engraver
Which wattage laser was this D1? I couldn't find it anywhere in your description or the video.
I want to do coffee tables - how do I find one with a frame large enough to cover a decent sized wooden coffee table?
Looking for the test file. Great video.
@CorneliusCreations
Жыл бұрын
Thank you, Here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
What program do you use to make your images, just got mine today and I'm really excited
@CorneliusCreations
Жыл бұрын
I have been finding them on Etsy!
Does the orange gaurd act as an eye protection?
How long will it take to write names or a few words on phone cases , adapters with this machine?
Great video, thanks. Can you link for me where to find the portable air filter that you have?
@CorneliusCreations
Жыл бұрын
That is the PSI woodworking brand on Amazon. They stay sold out a lot!
Can you use these machines on a 4x4 piece of wood?
Can you use this on tempered glass?
Can you engrave phones or electronics as well??
I have one. I am new to this I worry about if the image will be to small any tips
Great Vid!! I get mine tomorrow.... quick question... (I'm a rookie) why do you paint the tiles & jar pre laser??
@williammorris2009
Жыл бұрын
So the laser will work on transparent or reflective surfaces
I've had mine for about 4 months and I am very happy with it. I have the 5 watt version, the 10 watt seems like it does cut better so maybe soon I'll upgrade to the 20 watt module.
@CorneliusCreations
Жыл бұрын
I’m glad you like it! It is such a cool little tool!
@dulcebellz3857
Жыл бұрын
If ur only gonna cut then jump to 20w but to engrave the 10w is better but over all the 5w is best for engraving
@TheSpineSplitter1990
Жыл бұрын
@@dulcebellz3857 I've had nothing but great results using the 5w for engraving, initially I wanted to cut 3mm delrin plastic for guitar picks and pickguards but unfortunately It didn't work. I see a few people selling their 10w module only since they have the 20w so I might just save some cash and get that..
@Blash1
Жыл бұрын
@@TheSpineSplitter1990 was the 3mm too thick for the laser or what was the problem?
@TheSpineSplitter1990
Жыл бұрын
@@Blash1 So I made the rookie mistake of trying to cut blue plastic sheets with the blue diode laser, it will cut it but it's such a hassle. I did cut red plastic and it was a lot faster. Blue and clear acrylic or plastic will have some issues cutting or engraving right. 3mm to 5mm wood is fine though.
Nice vid. Why don't you have a honeycomb bed? Also, the Atomstack air assist works and is much cheaper. 😉
@CorneliusCreations
Жыл бұрын
I have the honeycomb grid now haha. I’ll have to check that one out!
That speed and power template, I can no longer find on site. Can you share that file?
Will this engrave quartz crystal points?
Can this be used to engrave biothane?
Great video, but your affiliate links don't work. Get a Page not found message from xTool. It would be interesting to know how long it takes for machine to do a tumbler and the reason for the paint on the mason jar and what paint was it you removed from the dog photo. Lots of little mysteries in the video but you are the best! Found you this morning and subscribed half way through.
@CorneliusCreations
Жыл бұрын
So happy to hear you enjoyed the video, Bill! Thank you for letting me know about the links. They are updated now!
I didn't see a mention on what you are using as an air filter
Looking at the image for the tumbler on the screen it looked correct, whey did it engrave mirrored?
@williammorris2009
Жыл бұрын
I think he had the rotary rolling the wrong way?
N you go over a second time for a deeper etch
What kind of prepping you are doing for photo portrait engraving on birch with that fast speed and low power? I've struggled to get good quality on my 20w D1 pro. Hope you can help me.
@alexandradonato9052
Жыл бұрын
I'm wondering the same.
Does anyone have or know where to get a chart for XTool 10watt Cutter, that shows basic power and speed settings. I'm burning up a lot of material trying to find just the right settings. If you have one can you put a link so us beginners have a plase to start
Can you use it on a deer skull
Hi, are you using the lightburn or the program that follows with xtool?
@CorneliusCreations
Жыл бұрын
Right now I am using laser box, xtool’s provided software. It works great
I cant get this laser to do anything!!! Im sobbing as I type this. So much for xmas presents using this thing!
@CorneliusCreations
Жыл бұрын
What’s going on? Have you joined the FB xTool user group?
Can we engrave portret on metal?
Hi, does anyone know how to make lasered creations on the xtool colored? It's advertised as being able to engrave 340+ colors but I can't find anything on how to make the colors appear...
can you tell me if you can make a line width .013' and .050" deep
Looking for something for laser etching tools from small 8mm spanners up to large torque wrenches (at least 2ft long). Is this suitable?
@CorneliusCreations
2 ай бұрын
Not this unit unless you get an IR module. I would consider the xTool F1. You will a video of it on my channel. (Only fiber and infrared lasers will mark & etch metal)
what kind of table do you have? look great and sturdy
@CorneliusCreations
Жыл бұрын
It is a Husky table from Home Depot. I highly recommend them! They are amazing!
Brilliant video with great tips thanks 👍 I can't see the link for the tile test pattern mentioned in the video however 🥺
@CorneliusCreations
Жыл бұрын
Thank you! Sorry for the delay, here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
@ektapurohit3777
Жыл бұрын
Awesome video, quite informative. I am now with this machine. I Can’t open this file. Please help
How does it know to etch versus cut right through material? Is that based on speed?
@CorneliusCreations
Жыл бұрын
That is an option that you can toggle on. When you select “cut” the laser module kicks into a high powered mode and gives you options for different materials.
Mske laser etching great again .
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
*Is this the same company that makes the scan tools?*
I prefere the portable! : )
Juast got my D1 20 watt. Question. Can I adjust the thickness of the etching or am I limited to the width of the laser. I would like my outline of an item to be a little thicker.
@CorneliusCreations
4 ай бұрын
If I’m understanding correctly, what you are describing would depend on how thick the lines are on the file you are trying to engrave. If you would like thicker lines, you may need to find a similar file someone made that looks thicker.
@dougward6669
4 ай бұрын
@@CorneliusCreations thanks for the quick reply. I’m scoring the outline of an image so there are no lines.
Thank you for this video... I have the f1 and when I upload an image (trying to do a soundwave) it keeps asking for DPI and its a very smudgey result... do you have any recommendations?? Thank you!! Doing this on stainless steel bracelet.
@CorneliusCreations
10 ай бұрын
Is the image you dowloaded a high resolution? If you downloaded a low resolution photo, the F1 is trying to take in account for the blurry pixels. Every laser varies, but I am usually running around 300 DPI or more.
@user-qq8ox6qg3f
10 ай бұрын
@@CorneliusCreations hmmm it looked pretty clear to me. it was a png.. should it be like a jpeg or svg for example instead? I'll try the 300 DPI... for power and speed I do 100% and 5mm/s for stainless steel.. does this should right?? Thank you so much for responding!
Is Makeblock the same as Xtool?
Which tool d1 watts are you using? Sorry if I missed it on your video.
@CorneliusCreations
Жыл бұрын
This is the 10 watt!
What button I need to press to cut
Wouldn't it be better to lower your speed and lower your power usage? The faster it moves the less time it has to engrave the hit area.
I'm doing a coated metal tumbler and trying to get the right settings for it
@CorneliusCreations
Жыл бұрын
If you are using the xTool try the settings in this video :)
Do you know if you can engrave a flash drive with the stool D1?
@CorneliusCreations
Жыл бұрын
Yes you can
So if I am looking at GlowForge or this what say you? Also is support good? I know GlowForge is US and this one is China-- Thanks
@CorneliusCreations
Жыл бұрын
Glowforge is a good machine, but it is ALSO a C02 laser. Which is more powerful. I am a fan of buying xTool and moving up as you learn how to use a diode laser like this.
I was a laser operator in a small steel factory for many years. At home I had a CNC plasma cutter and have made tons of art projects with it. I am interested in this product but my garage is not heated. Would the below freezing temps wreck the machine? Thanks for the video.
@leanewman
11 ай бұрын
Oh hadn’t thought of that. Would love to know the same
Nice one. Can this be used on aluminum business cards?
@CorneliusCreations
Жыл бұрын
It sure can! I’ve used them on mine!
What's the machine which cleans the air? Is it enough to use the laser in the house?
@CorneliusCreations
Жыл бұрын
This is a wood carving dust collector. It's not the best for fumes, but it does collect a lot of the smoke. It works great with the laser in my experience though.
Do you seal your hammers or portraits on wood with anything?
@CorneliusCreations
Жыл бұрын
I’m a fan of satin urethane
@RealDustyChandler
Жыл бұрын
@@CorneliusCreations thanks brother!
what images do you have to purchase to import for the xtool?
@CorneliusCreations
10 ай бұрын
You can find a lot of free ones, but you can import DXF, SVG & PNG files. Etsy has a lot of files and you can find free ones on canva.
Does anybody have this laser and also has a mopa 60w or similar? Is the price jump worth the mopa?