You are the first person to post what xTOOL doesn't tell anyone. Bless you.

@EmbraceMaking

Жыл бұрын

Thank you!

Those dad-blasted red, white and yellow cables took me longer to connect than the rest of the assembly! I thank you sir for your video as it helped tremendously! A heart surgeon would have had a time with connecting those cables

@EmbraceMaking

Жыл бұрын

Glad you got it sorted out and the video was helpful!

@flalife904

11 ай бұрын

Lmfao me to my fingers are to big legit took me a while , they didn't go in easy and when they did I was afraid a pin was bent or broken

@richsoutherland2924

10 ай бұрын

Haha yup. Exactly my most frustrating part!

@stopngo10

9 ай бұрын

I was came to the comments looking for exactly this! I don’t understand what they were thinking when they decided to put the connectors there. Who can even fit their fingers in that space to connect those 3! Especially the white one took me forever. Had to use the screw driver and hope I didn’t mess anything up. Literally almost quit the entire assembly because of those cables.

@markg8972

6 ай бұрын

Haha ,yes my friend I feel you I have just looked for a video to see if there was an easy way there so delicate and in such an tricky place😂

Today is day one for me with my D-1 after having spent yesterday putting it together. There were things i did not realize about cables etc.that were not explained in the drawings, and I learned a lot from this video. Thank You for putting this together. I have watched many other video's but this one explained things for a true 'Beginner' (I am technology challenged as well) and for that I appreciate your time and the time explaining things along the way.

@EmbraceMaking

Жыл бұрын

Thanks Timothy glad it could help you out! Thanks for the comment as well!

I can't tell you "thank you" enough! I watched your video about 3 times, and then while I was putting it together I would just pause your video. Got it set up and working on the first try!!!

@EmbraceMaking

Жыл бұрын

You're very welcome, this is why I make these videos :)

My gosh.. glad I found this tutorial. Saved me a lot of "anger" time with this machine. I just put it together and made sure the cable management was smooth once completed. Thanks a million. I really appreciate you.

@EmbraceMaking

Жыл бұрын

Glad it helped! You're very welcome!

@robotron07

Жыл бұрын

CABLE MANAGEMENT IN THIS MACHINE IS AN ABSOLUTE NIGHTMARE

"...kerf only has four letters..." and now I'm blowing martini out my nose! SIR! This is hands-down THE BEST tutorial I have ever seen on anything! You will see my order for the fume extractor momentarily. THANK YOU! Take extra desserts for the rest of the year!

@havocproltd

Жыл бұрын

I don't think XTool could have chosen a better rep for this!

@EmbraceMaking

Жыл бұрын

Ha thanks for the kind words! Glad you really liked the video and my sense of humor :)

@llkaygifts

Жыл бұрын

Agreed!!!

Just about to go and pick up my new D-1 Pro 20w with extender and you have made the thought of set up far less daunting!!! Thank you so much for your fantastic guide... people like you make this World a better place to be in and we Thank You for your time and efforts - they are greatly appreciated (even here in little old New Zealand!), wanted you to know - even if you aren't always told so xxx

@EmbraceMaking

Жыл бұрын

Thank you so much for those kind words! Glad it can be of use to you and others :)

@rrdavis55

Жыл бұрын

Im installing the extender now. 4-04-23. Going to use the drag chain on top of the rail. Ive been in electronics for 55 years and must admit I needed this video and found my big body inside the laser frame while it was on a bed and up on its side! Stay tuned for "Page Two" as Paul Havery would say!🤣

Huge help!!!...I had to walk away for a day because I couldn't get the Y-axis aligned. Super Easy fix that my frustration wasn't allowing me to see. Thank you for taking the time to put this video together.

@EmbraceMaking

Жыл бұрын

You're welcome Neal, hope you come back for more of my XTOOL videos!

I was afraid of opening my xTool 10w, but when I watch this video, everything became clear. I put my machine together by watching this video; stopping and starting with each section. I have purchased the fume extractor and the power button. Now I am and ordering the the filter to use with my 3gal shop vac. I am so appreciative of your video. Your tutorial is beyond my expectations and the best video for putting thing together by far. Subscriber for life!

@llkaygifts

Жыл бұрын

BTW thank you for grate piece for the board and connectors

@EmbraceMaking

Жыл бұрын

Thank you so much for your kind words and I'm glad the video was that helpful :)

Absolutely brilliant. So glad I found this video. I just ordered the 20w d1 pro yesterday and this has filled me with confidence. Going to watch a few more times before setting mine up. Thank you for the content. Will be picking up the cover for the PCB soon. Very well done indeed. Subscribed!

@EmbraceMaking

Жыл бұрын

Great to hear! Thank you so much for your support and for subscribing!

@e46_nole

Жыл бұрын

So how did it go for you? Setting mine up tonight!

Thank you Brother....this is one of the best most thorough setup vids I've seen and went through and I've been woodworking all my life and running a business for the last 6 years and run a CNC so I'm used to watching vids like this but yours was awesome. I didn't even need the manual and i was up and running and already doing orders I have within 2 hours. This is what the manufacturer videos should be like...some are good but most not. Great job man..very impressed. And I will be buying your fume extractor. My whole house smells like char lol.

@EmbraceMaking

Жыл бұрын

Thank you so much for the kind words and high praise! Put a lot of effort into this video, glad it is helping people get going!

Thank you so much for your great content! I'm getting my XTool D1 Pro (10W) in a few days and am excited to make the modifications you described. Keep up the good work!

@EmbraceMaking

Жыл бұрын

Have fun with it and thanks for the comment!

Clear instructions and good camera work ensures that this video is concise and effective, well done and keep up the good work

@EmbraceMaking

Жыл бұрын

Thank you so much Frank, always trying to improve and make the best content I can. :)

I love everything about your channel. The way you explain it, it’s super easy to follow

@EmbraceMaking

Жыл бұрын

Thank you so much Aaron

Wow! Super helpful video (yes, even 1 year later). I just received my Xtool D1 Pro and will be assembling today. Your video is a game changer. Thank you!

@EmbraceMaking

9 ай бұрын

Glad it was helpful! Doesn't seem like anything in the assembly has changed in the past year so should be still relevant :)

Thanks for this very thorough and complete video. After reading the horror stories on the FB community from some folks struggling with their set up and output of their projects using the D1, I realize how lucky I am I found your channel and this video. Really great stuff and thanks for the practical and comprehensive way you share information.

@EmbraceMaking

6 ай бұрын

Glad it was helpful! I wasn't aware so many people were struggling on the FB community. I think it's one of those things where there is the initial learning curve and once you break through that it shouldn't be too bad :)

Excellent video! Great tips on cable management, gantry and stepper motor shaft alignment. xTool needs to either have that little tab cut off the circuit board which prevents it from aligning with the other side or revise their assembly instructions the way you did it. Also love the flame extractor. Will be purchasing one tof those from you for sure. Much more elegant solution than one of the rinky dink enclosures... Thanks for all your thought and work on this video. Best xTool D1 Pro video I've seen so far.

@EmbraceMaking

Жыл бұрын

Hi Jeff, that's a lot of praise! Thanks for the thoughtful comment, really appreciate it! Whenever you're ready to get a fume extractor nozzle you know where to find me. Thanks again!

Thank you Very Much!!! While we watched your video to set up my D1 Pro XTool, my husband put it together while I "manned" the space bar for your video. hee hee You made this easier than the user manual, especially including the extra little details. We appreciate you and will be liking and following for future references. :)

@EmbraceMaking

Жыл бұрын

Thank you so much for the comment, really happy you found the video so useful :)

I can't tell you how much you have helped me with your videos! I cant wait to receive your items that I've purchased!

@EmbraceMaking

3 ай бұрын

Incredible, thank you ! Hope you enjoy them!

Thanks heap for doing this video! I HATE reading instructions so having this video made my life so much easier when I had to put my D1 pro together a couple days ago. 🤗🤗🤗

@EmbraceMaking

Жыл бұрын

No problem, glad you found it helpful! If you also have the RA2 rotary attachment I just released that video and it is pretty thorough as well. Might also be something you want to check out :)

This video really helped with my assembly. I was having trouble with the cables and your tip/mod solved my problem. Thank you!

@EmbraceMaking

Жыл бұрын

Glad you found it useful!

I fully expected to see 1 million+ subs for this channel. Outstanding video, thank you!

@EmbraceMaking

Жыл бұрын

Wow, thanks! Hope you're right!!!

Great vid. Just got my xTool D1 Pro 20W and your vid got me up and running quickly. Thanks!

@EmbraceMaking

Жыл бұрын

Glad it helped Dennis!

Today I conquered putting the d1pro 10w thanks to you. The manual was good but you explained and showed me exactly what I needed to do. I appreciate you!

@EmbraceMaking

4 ай бұрын

Glad it helped, this is why I do this!

I would never have made it through the setup without this video! Thank you!

@EmbraceMaking

Жыл бұрын

Glad I could help!

@christinebagatin5945

Жыл бұрын

Hi there, video helped a LOT!!! Trying to figure out how to adjust the rear plate, as the focal point is not longer at (0).

I'm totally new to Xtool. I looked at a dozen videos. You're awesome. Your video is better than the actual manufacturer!!!!

@EmbraceMaking

Жыл бұрын

Wow, thanks! Really appreciate the kind words :)

Today my D1 pro Golden Red arrived and I had never seen a video about this, and thanks it was very useful as you explain it, you really speak very clearly ,you have a new subscriber 😊

@EmbraceMaking

7 ай бұрын

Glad it helped! Thank you so much for subscribing :) I have lots of D1 videos if you check the rest of my channel

THE BEST video out there with this detailed instruction. Thank you !!

@EmbraceMaking

8 ай бұрын

You're very welcome!

Thank you! This helped me so much, especially the tips on cable management. I was on the point of getting a drag chain to try and get the cables under control - your solution saved me some money!

@EmbraceMaking

Жыл бұрын

Glad it helped!

Love that vacuum adapter you made super smart and cool design.

@EmbraceMaking

Жыл бұрын

Thanks! I see you have some experience with the D1 yourself, nice videos!

Thanks for the great videos. You have really helped me assemble the d1 pro.

@EmbraceMaking

Жыл бұрын

Glad to help!

Very Very helpful in getting my new laser up and running and helping me understand the basics. Thank you!

@EmbraceMaking

Жыл бұрын

You're very welcome!

Thank you so much! Just ordered fume extractor and the cup tilt.. you’re amazing!

@EmbraceMaking

Жыл бұрын

Thank you so much for your comment and order Bob!

Thank you! I didn't even use the manual. Your walkthrough and explanation was great!

@EmbraceMaking

Жыл бұрын

You're welcome! More XTOOL content to come :)

As totally careful as I was to follow every single instruction they gave to the letter, I missed that connector at 6:56. I hadn't fired up the machine yet because I'm waiting for a couple more incidentals and while I do, I saw this video! When I watched this I went back and redid everything and I'm still working on it now going through second by second of this video. My belts weren't tightened properly, I just randomly attached the gantry somewhere in the middle instead of bottoming out at the back. THEN tightening the connector bolt screws. I felt like the instructions might have assumed end user knowledge being much greater than mine is. But this connector tucked in at 6:56 would have had me shipping the machine back 😭. Onward with new knowledge!!! Appreciate you!

@EmbraceMaking

Жыл бұрын

Thanks Debi! Glad my video could be of use to you, enjoy your machine!

Just cut my first project and your video was such a help. Subbed and thumbs up. I got the air assist and the fume extractor and cut on a honeycomb tray and had zero char on either side. I couldn’t believe how clean it cut.

@EmbraceMaking

Жыл бұрын

Fantastic! Glad you got it all sorted out and great results!

@edhiestand1197

Жыл бұрын

@@EmbraceMaking What is powering the fume extractor? Would be interested in seeing what the exit looks like, window , wall or???

Thanks for the in-depth and straight forward video - much appreciated!

@EmbraceMaking

Жыл бұрын

Thank you for the comment Robert!

Best assembly video yet. Thank you.

@EmbraceMaking

9 ай бұрын

Glad you enjoyed it!

Thanks so much for your thoughtful assembly steps! This new venture is scary enough without the concerns of messing up installation.

@EmbraceMaking

Жыл бұрын

Thank you Jen! Glad it helped you :)

Clear and concise instructions. You helped so much! Thank you!

@EmbraceMaking

Жыл бұрын

Glad it helped!

This video was super informative and all around awesome, thank you for putting it together!

@EmbraceMaking

4 ай бұрын

Thank you! Really happy you found it useful!

THANK YOU for this video and your content! Just received my D1 Pro 20W today and like others, this has instilled confidence within me lol

@EmbraceMaking

Жыл бұрын

Great to hear! Hope you've been having fun with it already

Great video! Thank you for the cable management ideas. I assembled before watching this so I dealt with this problem also; although not as elegantly as you. Cheers!

@EmbraceMaking

Жыл бұрын

Thanks Ron, glad you got it sorted out one way or another!

Impressive attention to detail, well done.

@EmbraceMaking

Жыл бұрын

Thank you very much!

Great Video. Just used it to set up my laser. Now to start lasering some objects. Brand new to lasering glad I watched your vudeo. Thanks for all the tips.

@EmbraceMaking

Жыл бұрын

Glad it was helpful! Hope you come back for more future XTOOL videos!

Awesome video will defo help when I eventually get round to building my D1 pro 20w

@EmbraceMaking

Жыл бұрын

Great to hear!

Great information and well presented! The only things I'd add are: - when you and initially putting together the pieces, insert the screws and tighten them only until they just more that touch. When all the fasteners for a part are in then go back and tighten them in a couple of rounds. Tightening them at the start could cause mis-alignment. - do the zap tie around the x stepper first then secure the cables under the side frame but be sure to have the x axis all the way to the back and secure cables starting at the back and work towards the front.

@joepro8401

5 ай бұрын

Cheers for the tips on the cable ties! Was having issues with the wire moving excessively, but your tip fixed it

thank you for the help and the video. machine is now connected and working

@EmbraceMaking

Жыл бұрын

Great! Not sure how much help I could have been, but I'm happy to hear you got it working. If you have a minute to explain how you fixed it perhaps someone will come across this in the future and it might help them too. Thanks!

Amazing I did it You made my day Thank you!!

@EmbraceMaking

Жыл бұрын

Glad you liked it!!

Should be getting my 10w red next week. New to laser engraving but not to making things with other tools, especially intricate stuff with the scrollsaw.Trying to make the setup and start up as smooth as possible. Great video, definitely will help, thanks.

@EmbraceMaking

Жыл бұрын

Thanks Emil! If you haven't already ordered your 10W I would super appreciate if you used my affiliate link in the video description. Thanks!

You’re the best!!!thanks so much for the video!❤

@EmbraceMaking

10 ай бұрын

You're very welcome, glad it was helpful for you !

I am new to the Xtool community having just bought the Xtool D1 Pro 20W and I am in the process of setting it all up. I do like your explanation and demonstration of how to manage the cords with the better placement vs Xtools utilization. As far as the fume extractor I really like the concept but there is no explanation as to what you are connecting the CPAP hose to and how that works. I think better explanation of that would be helpful! This makes individuals do further research when it could have been done with one person being 100% concise with all the modifications being done. Otherwise a very good video with great information to help make production better for everyone. I will definitely be watching more of your video's.

@EmbraceMaking

10 ай бұрын

Thanks for the comment! Yes I am sort of kicking myself in hind sight that I wasn't more clear about that in this video. However, for your reference here are two videos that explain the other end of the CPAP hose: Filter system: kzread.info/dash/bejne/nWultqdtpJfZlps.html Filter system with an enclosure: kzread.info/dash/bejne/iKl30c5miNmZoqw.html Similar system on the Creality Falcon 2 with the vacuum system explained: kzread.info/dash/bejne/iXeW18qidcXSntI.html

Awesome Video, very intuitive!

@EmbraceMaking

Жыл бұрын

Glad it helped!

Excellent video!!!

@EmbraceMaking

Жыл бұрын

Thank you very much!

Can't wait for future project and D1 upgrade.

@EmbraceMaking

Жыл бұрын

Thank you, always more in the works ;)

Thanks for nice and informative video. Did watch this a couple of times, most needed was those parts regarding routing. (still have a little problem with the last fix (~13-14 minutes). Will check yout other videos coming days. Thanks /Dan from Sweden

@EmbraceMaking

Жыл бұрын

Glad you enjoyed it, the RA2 video is being worked on, should be posted hopefully in a week!

This is a really insightful and well thought out video. I have a question. I was having a hard time finding a work table for this laser and honestly I didn't want to take the time to make one. I have a Costco 34-in by 34-in card table. Should I get a piece of 26x26 in wood to place underneath the laser or should I just flash the table with aluminum? I use to laser engrave back in the day before it was cool and the machine that I used had a metal bed.

you mention using a protective mat under your project, Xtool has their iron honeycomb workspace, as for your burning on the back of the piece and having more crisp front, the air assist should help with that

@EmbraceMaking

Жыл бұрын

Definitely! In a future video I have a lower cost solution to the honeycomb work space for people on a little more of a budget. The silicone mat underneath is a good pairing with this solution I will be releasing soon. Air assist definitely helps with the top surface and having air space under the part prevents all of the burning on the bottom side.

Thanks sooooo much! This video is MUCH better than the one that xTool has

@EmbraceMaking

4 ай бұрын

Glad you think so! I really appreciate the positive feedback

Wonderful video! I just received mine today and used your video for the set up. The only difference I seen was they are using hex head screws now. All of the other set up info and extra tips are wonderful.

@EmbraceMaking

7 ай бұрын

Awesome glad it was helpful!

Great video! wondering if you can use the fume extraction and air assist at the same time?

@EmbraceMaking

Жыл бұрын

Yes you can, but the air assist might push some of the fumes away. The nozzle should still get most of it, but realistically never 100%

Thanks for this video - just got a 10W D1 Pro myself and the fume extractor looks great; One question: What sort of volume of air do you think the extraction pump needs to pull (i.e. how many litres/min) in order to be effective??

Very informative! I will be getting the adapter , the link to the hose doesn't work, is there a newer version??

@EmbraceMaking

Жыл бұрын

Thanks Monica, yes amazon is temporarily out of stock it seems. I don't see a newer version in the meantime so you might have to shop off of amazon for that in the meantime!

Extremely well packaged. Premium presentation! The whole thing is just solid and well made. Just put mine together yesterday and can't wait to try it out! PS Your voice is like butter to my hearing impairment! 5:5!

@EmbraceMaking

Жыл бұрын

Thank you Debi you have been more than kind!

pretty good and professional

@EmbraceMaking

Жыл бұрын

Thank you for your kind words!

better of the informative videos on assembly of xtool d1 pro.. subscribed.. had similar realizations with gantry wires issues.. ill have to readjust carriages alignment as presented as i've noticed deviations in coordinates while moving laser head to 100x100 mm for origin.. seems 0x0 absolute origin keeps moving a mm off every return.. reason "free framing" works w/o precise positioning.. the fume extractor is brilliant! commend the ingenuity.. do recommend using air assist for wood cuts as it improves vastly cleaner kerfs from charring.. multiple passes at faster speeds vs few at slower rate works well with 5mm plywood for me.. excellent altogether.. thanks for sharing insight...

@EmbraceMaking

Жыл бұрын

Thank you so much for the thoughtful comment! More D1 Pro content to come soon!

Great tutorial!

@EmbraceMaking

Жыл бұрын

Thank you! Cheers!

hello and thanks so much for this video it helped me set up my xtool d1 pro. Now im at the phase of experimenting materials but I have questions for you before I begin: 1.Do I need both an air assist and your fume extractor? Do they do the same thing? 2. Do you suggest the metal plate or a honeycomb Laser Bed to go on top of silicon mat but under material? 3. Should the laser slide all the way to the mat or be adjusted where when it slides in, the back metal piece of laser underneath plug is even with the bracket its attaching to? Ultimately resulting in laser being approximately a quarter inch from the mat?

Great video! Helped me make the decision to buy one, and will be following your video & recommendations! Any other suggestions for the CPAP hose, as your link above no longer works.

@EmbraceMaking

Жыл бұрын

Thanks Todd! Right now Amazon appears to be temporarily out of stock so you might have to shop around for that piece off of Amazon unfortunately. I imagine it won't take them long to get them back though!

The link to the cpap hose has been removed. Was there a problem with it? Do any of your add ons and products I can purchase void the warranty? I find your videos very helpful.

Should I use the vacuum extraction you recommend with air assist?

Thank you, I've never used an engraver machine and since my hands shake more I need one. I've watched several videos and now I just need to decide which D1, D1Pro 10W or 20W to get. Thank you Also, I love and need the extra filtration you created

@EmbraceMaking

Жыл бұрын

Glad it was helpful! Thank you so much for your kind words!

Can we get a more detailed or close-up view of how effective the extractor is? Also, I noticed that this mod only goes up to the 20w: 40w coming soon? I'd love to get this as it would save time and money on building or buying an enclosure. Definitely getting that rotary mod, though!

the wire on the gantry that was tucked up in with other wires was not plugged up. saw that in your video and said I do not remember doing that one. thanks again

@EmbraceMaking

Жыл бұрын

Glad you got it sorted out! Would have been a shame to have not gotten to use it. Enjoy!

Can you post the link to the adhesive clips you added to place the wire under?

@EmbraceMaking

Жыл бұрын

In the video description :) but here as well: amzn.to/3W2WLZ4

Nice smoke extractor. Will it work with air assist on? Seems like air assist will push smoke beyond the extractors effective area.

@EmbraceMaking

Жыл бұрын

Absolutely possible. I have pointed this out to a few people who have messaged me about it. I haven't personally tested it but it would make sense that air assist could push away fumes for sure

Hi. Just ordered your laser upgrade for the venting. What does the cpap hose connect to on the other end?

@EmbraceMaking

Жыл бұрын

Thank you for your order! Check out this video for what I'm doing on the other end of the hose: kzread.info/dash/bejne/nWultqdtpJfZlps.html

Hi 👋 and Thank You for the best and great explanation and going beyond. Have you assembled a xtool D1 Pro with extension kit?

@EmbraceMaking

Жыл бұрын

Hi Max, thank you so much! I have not tried the extension kit... although I have the rotary kit and need to make a video soon!

sooo grateful love the cable ties ..i ordered the cable tags but what size cable ties mine i had home were too big thanks

@EmbraceMaking

4 ай бұрын

The ties I used in this video are about 8" long and 1/8" wide. If you like that system check out my other video here for an even better solution: kzread.info/dash/bejne/d6KmxsSwqqqXmpc.html

@ssrealestateserviceinc.5064

4 ай бұрын

Do you have a video for your new harness cables for the d1 pro 5?

Nice! Does it engrave brushed steel?

Great tutorial!! I watched as I setup my new 20w. I know you mentioned the custom smoke attachment for the 10 w. I’m not seeing a link to it in your store. Is that available by chance?

@EmbraceMaking

Жыл бұрын

Thank you! Glad you enjoyed it. Yes the 20W is available right here: embracemaking.com/products/xtool-d1-pro-20w-fume-extraction-nozzle and there are some other XTOOL accessories available here: embracemaking.com/collections/xtool-d1-pro

@derekpayne4305

Жыл бұрын

@@EmbraceMaking Thank you! Just ordered.

@EmbraceMaking

Жыл бұрын

Thank you Derek I appreciate your support!

@derekpayne4305

Жыл бұрын

@@EmbraceMaking oh yeah, one more thing. I was looking to get that CPAP hose like you have but it looks like the affiliate link isn’t working. Could you relink that to me? Thanks!

Thank you very much...Very helpful!!!!!!!!!!!!!!!!!!!!!!!!!!! EXCELLENT!!

@EmbraceMaking

2 ай бұрын

Glad you liked it!

can you control the cut with, I want to do wire inlay and I need .008" and .014" thousands?

I'm finding this extraordinary helpful. Question. There appears to be a cover over the air assist hole. Does that just peel off??

@EmbraceMaking

2 ай бұрын

Thank you! Is it that white plug on the air assist inlet that you're referring to?

Thanks!

@EmbraceMaking

Жыл бұрын

Thank you so much for your donation, very much appreciated!

there was lens cover provided in the tool box where does that go ?

Is there an stl file for the fume extractor

Will the 40w engrave in polymer plastic?

Can you still use air assist with your extraction nozzle installed? Thank you!

@EmbraceMaking

11 ай бұрын

Shouldn't be an issue although depending on the strength of your air assist it *might* blow some of the smoke away from the nozzle.

Hey so I just got the same machine. However after I to to process. I don't get the origin green dots anywhere on my print. Any idea why?

Nice video… I’m looking to purchase one of these and this one sealed the deal. I was looking for the follow video, did you make it yet?

@EmbraceMaking

Жыл бұрын

Thank you! Yes I did, you can find it here: kzread.info/dash/bejne/jKKnxZqQfqizYJc.html And if you haven't bought yours just yet I would super appreciate if you used my affiliate link in the video description to do so! Thank you!

@darrinstephenson451

Жыл бұрын

@@EmbraceMaking I'm just seeing this. I think I purchased right after I commented. But if I'm not mistaken, you did point out some extra 3d parts that you created for the xtool. I'm definitely purchasing a few of those. Good work bro! 👍

Great video. Your explanation is very clean . The link for the CPAP no longer available or wrong link. The smoke eliminater acc is perfect 👍

@soldiersilk65

Жыл бұрын

Mark DM me about a hose

@EmbraceMaking

Жыл бұрын

Thanks for the heads up! Link is fixed with a new one!

The x-axis cable (the one that goes from the laser) put like this prevents from finding the switch limit in y. Right?

@EmbraceMaking

Жыл бұрын

I have no issues with my cable set up and interference with the limit switches, it shouldn't be an issue?

Great video! A few questions.. You don't show what is on the other end of the CPAP hose, what is that setup re removing fumes etc. Are you saying with your setup you don't need an enclosure at all? Thanks

@EmbraceMaking

Жыл бұрын

Somewhere in the video I believe I put a link that pops up in the top right hand corner of the screen, but here is my other video showing the filtration system: kzread.info/dash/bejne/nWultqdtpJfZlps.html My nozzle is geared more towards people who don't have room for the enclosure or are doing light work with their laser. I would recommend a full enclosure and professional filtration system for anyone running their laser for long periods of time or working with really nasty materials. The nozzle works great but realistically some smoke and fumes will still escape as it is impossible for it to get absolutely everything. An enclosure (in theory) captures everything since there is nowhere else for the fumes to go.

@Piginhatwoodcrafts

Жыл бұрын

@@EmbraceMaking thanks for info ,👍

Thank you for this overview. I have one question: how long can Xtool d1 pro 20W work without interruption? Can it work for 8 - 10 hours without interruption?

@EmbraceMaking

Жыл бұрын

Check out their FAQ section here... scroll down to question 14... seems like it go continuously (according to them): support.xtool.com/hc/en-us/articles/4405624562199-Pre-sales-knowledge-for-xTool-D1

Just put mine together have not even turned it on yet. Question it said I could not use laser box basic? I don’t know what that is. Would my next step be down loading the free program from xTool? Great video go to go back and fix a few things you pointed out. Thks for sharing!

@EmbraceMaking

9 ай бұрын

Hey sorry I must have missed your comment, I haven't used laser box basic. What kinds of things will you mainly be doing? For general use the xtool software isn't bad. If you're an advanced used light burn seems to be the choice of the pros

@kandiecandelaria3134

9 ай бұрын

@@EmbraceMaking just want to be able to put clients name on cutting boards for now

Great Video! The manufacturer website mentions capabilities of offline processing/operating mode but no where does it say how to do this. Is it possible to load the job to the laser, disconnect from the computer and engrave offline? To run the same job multiple times without being connected to WiFi or USB connection.

@EmbraceMaking

Жыл бұрын

Good question! I haven't tried it... but... I bet if you disconnect from the computer and just press the button at the front I believe it will automatically start the last job. Give that a try!

@josephdiazjd9

Жыл бұрын

@@EmbraceMaking I tried it out and nothing happens. After disconnecting, the machine will not process the last job. It will give a pop up warning if machine is disconnected before pressing the start button on the machine as well. Using XCS and D1 pro 10w on PC.

I wanted to add,Very well spoken also. XTool should be using you as there US representative. Sometimes I have a hard time understanding there videos due to the language barrier.

@EmbraceMaking

Жыл бұрын

Thank you so much Mark, unfortunately that is a common challenge when dealing with overseas companies.

Hello ! Tell me, please, what could be the problem with my laser (xtool 1d pro) is not a flash, it's new, I just bought it. What should I do?

Sorry useing the Xtool d1 pro 20w machine and their software. Thanks