If the trigger roll pin is so sloppy from factory why not include one with the new trigger?
@808G8GT9 күн бұрын
Funny, when i installed my tyrant trigger, removing the factory trigger shoe, i actually whispered to myself "wiggle, wiggle, wiggle".
@akeruo59613 ай бұрын
Just got mine installed yesterday looks great with my Evo grip module and fdez comps slide.
@tyrantcnc
2 ай бұрын
That does sound like a sick build!!!
@cameronsloan92545 ай бұрын
I will buy it immediately upon release
@Klikklikboom091122 күн бұрын
My trigger blade does nothing on my Wilson combat grip module. Is there a way to adjust the blade?
@tyrantcnc
19 күн бұрын
We have tons of people who run the wilson combat module with our trigger, reach out to customer service for help
@Berserkable2 ай бұрын
Will you make a bladed trigger like this for the 320?
@tyrantcnc
2 ай бұрын
We don't have a timeline for a P320 version, but it's something we've looked into. Stay tuned!
@tonyrunner313 күн бұрын
This is not a very detailed video. you need to explain in words how everything fits together and stuff. You need to be more detailed for people who are taking this apart for the first time. There were a lot of little things that you did not mention that I just had to figure out on my own. Stuff just “sliding into place” is not a very good description for how these parts fit together. This is more a video for people who already know how to disassemble and reassemble the FCU. A better closer camera angle would be better as well. I was able to get through most of it but reassembly was not easy, had to go to another video to make it work. Edit: ok i will admit I was trying to put this back together and was very very frustrated when I wrote this 😅. I wasn’t able to get the FCU back into the frame because that little bar that connects to the take down lever wasn’t in its slot and I didn’t have it in the correct position. I love the trigger it’s fantastic. This was a good video. It’s just that it was my first time taking apart the FCU so i just watched a full disassembly and reassembly video to understand all the components and how they interact with each other in order to better understand what you were doing in the video. I ended up doing a full disassemble and reassemble which I’m glad I did because now I know way more about my gun. Thank you very much for the upload very pleased with my new trigger and am eagerly waiting for the matching gold mag extension and mag-well. GREAT STUFF Second edit: Just got done shooting and IDPA match with this trigger and it felt really nice no issues whatsoever. Looks sexy AF too
@stoneridgezutt50882 ай бұрын
installed mine and the slide release doesn't work fallowed the video to the T
@stoneridgezutt5088
2 ай бұрын
ok figured out out to release the stuck slide had to use a flat screwdriver to pull on it outward for it to release looks that the spring wasn't placed ontop of the slide release.
@tyrantcnc
2 ай бұрын
It does happen! The slide release spring can be a little difficult to seat initially but once you see how it should fit with the tab it'll be easier in the future.
@romanxxxx3 ай бұрын
can you show a video of a p365 with all your mods installed?
@tyrantcnc
2 ай бұрын
We should have something up on the page now, check out our Instagram as well!
@selaha11in6 ай бұрын
Black fcu over a black mat might not have been the best choice.
@sohot99
3 ай бұрын
Red safety looks prettier
@BrothaGoodReps
25 күн бұрын
Very poor choice for an install video
@US2A4 ай бұрын
Mine gets here Monday, you really dont have the tyrant take down and slide release on there? Lol
@tyrantcnc
2 ай бұрын
Workin' on it 😅
@US2A
2 ай бұрын
@@tyrantcnc When do we get all purple parts
@jonathanrios7936Ай бұрын
Will this fit my P365 Axg Legion ?
@quantlife9002
24 күн бұрын
Not sure, I ordered one today for my AXG so I will let you know 😂
@tyrantcnc
19 күн бұрын
it will!
@tyrantcnc
19 күн бұрын
it will!
@quantlife9002
18 күн бұрын
@@jonathanrios7936 it arrived today and I installed it, it fit but it is a pain to get the FCU out now, looks amazing though
Пікірлер: 26
If the trigger roll pin is so sloppy from factory why not include one with the new trigger?
Funny, when i installed my tyrant trigger, removing the factory trigger shoe, i actually whispered to myself "wiggle, wiggle, wiggle".
Just got mine installed yesterday looks great with my Evo grip module and fdez comps slide.
@tyrantcnc
2 ай бұрын
That does sound like a sick build!!!
I will buy it immediately upon release
My trigger blade does nothing on my Wilson combat grip module. Is there a way to adjust the blade?
@tyrantcnc
19 күн бұрын
We have tons of people who run the wilson combat module with our trigger, reach out to customer service for help
Will you make a bladed trigger like this for the 320?
@tyrantcnc
2 ай бұрын
We don't have a timeline for a P320 version, but it's something we've looked into. Stay tuned!
This is not a very detailed video. you need to explain in words how everything fits together and stuff. You need to be more detailed for people who are taking this apart for the first time. There were a lot of little things that you did not mention that I just had to figure out on my own. Stuff just “sliding into place” is not a very good description for how these parts fit together. This is more a video for people who already know how to disassemble and reassemble the FCU. A better closer camera angle would be better as well. I was able to get through most of it but reassembly was not easy, had to go to another video to make it work. Edit: ok i will admit I was trying to put this back together and was very very frustrated when I wrote this 😅. I wasn’t able to get the FCU back into the frame because that little bar that connects to the take down lever wasn’t in its slot and I didn’t have it in the correct position. I love the trigger it’s fantastic. This was a good video. It’s just that it was my first time taking apart the FCU so i just watched a full disassembly and reassembly video to understand all the components and how they interact with each other in order to better understand what you were doing in the video. I ended up doing a full disassemble and reassemble which I’m glad I did because now I know way more about my gun. Thank you very much for the upload very pleased with my new trigger and am eagerly waiting for the matching gold mag extension and mag-well. GREAT STUFF Second edit: Just got done shooting and IDPA match with this trigger and it felt really nice no issues whatsoever. Looks sexy AF too
installed mine and the slide release doesn't work fallowed the video to the T
@stoneridgezutt5088
2 ай бұрын
ok figured out out to release the stuck slide had to use a flat screwdriver to pull on it outward for it to release looks that the spring wasn't placed ontop of the slide release.
@tyrantcnc
2 ай бұрын
It does happen! The slide release spring can be a little difficult to seat initially but once you see how it should fit with the tab it'll be easier in the future.
can you show a video of a p365 with all your mods installed?
@tyrantcnc
2 ай бұрын
We should have something up on the page now, check out our Instagram as well!
Black fcu over a black mat might not have been the best choice.
@sohot99
3 ай бұрын
Red safety looks prettier
@BrothaGoodReps
25 күн бұрын
Very poor choice for an install video
Mine gets here Monday, you really dont have the tyrant take down and slide release on there? Lol
@tyrantcnc
2 ай бұрын
Workin' on it 😅
@US2A
2 ай бұрын
@@tyrantcnc When do we get all purple parts
Will this fit my P365 Axg Legion ?
@quantlife9002
24 күн бұрын
Not sure, I ordered one today for my AXG so I will let you know 😂
@tyrantcnc
19 күн бұрын
it will!
@tyrantcnc
19 күн бұрын
it will!
@quantlife9002
18 күн бұрын
@@jonathanrios7936 it arrived today and I installed it, it fit but it is a pain to get the FCU out now, looks amazing though