What a perfect demonstration! I had doubts on purchasing this model with the RX insert. Now I'm reassured and confident in purchasing it. Thanks! Now a question I must ask, when riding a motorcycle with this glasses, will there be any wind coming up to the eye area? Reason I asked is because I have a mindset of using one product for many different uses. THANKS!

@SugarFreeTargets You can take them to a local optometrist. Unless you have a very strong prescription, just about any local lab can make the lenses for you. I recommend they use polycarbonate for additional impact protection. You will need to take the insert with you, so they can make the proper measurements.

Never could of done that without you, great vid

Nice job

@SafetyGlassesUSA

Ай бұрын

Thanks!

I use them riding my Honda CBR and have no problems :)

@ARVNReEnactor There is a possibility you will experience some wind behind the lens, but that depends on your face shape and how close the glasses/lenses fit your cheek area. Speeds under 45mph should be no problem, but highway speeds may. You'll have to experiment to see what works for you.

@SafetyGlassesUSA Thanks for the reply and help, but I literally found out just then from the suppliers that my replacement nosepiece is wrong >.

@SafetyGlassesUSA By any chance, could you tell me the measurement of the glasses? I would love to have an idea of how it looks like.

How do you put your prescription lens into the insert???

I'm having A LOT of trouble attempting to install the p-2B insert into the Crossbow, is there anyway you can help me? Thanks in advance.

Yeah I did use the rx nose piece but it was big and bulky I was exaggerating the 5" but it had atlest 1" if not little more. Is the p2b a lot more low pro to the glasses then the urx

@SafetyGlassesUSA

9 жыл бұрын

They're both very similar when it comes to fit. In my opinion the URX is the best choice for adding an Rx insert into the Crossbow. Send an image of your Crossbows with the insert installed to service@sgusa.us and I'll confirm they're installed correctly.

@hambone950

9 жыл бұрын

ok thanks

@LJW943 I'll post up a video Thursday or Friday on how to install the P-2B into the Crossbow. What part of the installation is causing you the most trouble?

With the URX Insertion I can put them directly on the glasses or do I have to change them just like you did?

@SafetyGlassesUSA

3 жыл бұрын

This is an older video. The most common Rx application for ESS ICE is with the URx Insert. Yes, the URx carrier replaces the stock nosepiece.

@LJW943 Our new video showing how to install the P-2B insert into the ESS Crossbow is live. Let me know if I can provide any more information or assistance.

Do Ice's lenses fog up easily? I think they have a bigger field of view than the Crossbow. And I'm going to use it with RX Insert, can you tell me which one is harder to fall if I run? U-rx or Vice?

@SafetyGlassesUSA

3 жыл бұрын

The ICE lenses have a bit more airflow which helps with lens fogging.

@Moaximenes

3 жыл бұрын

@@SafetyGlassesUSA Grateful for the information! So I'm going to buy the Ess Crossbow Suppressor with RX Vice. Can I put the Vice directly on the Suppressor or do I need an adapter?

@SafetyGlassesUSA

3 жыл бұрын

@@Moaximenes Yes, you can install the VICE directly into the Crossbow. The VICE comes with an adapter nosepiece.

@Moaximenes

3 жыл бұрын

@@SafetyGlassesUSA So that will be the choice! I thank you for your help and I'm sorry for the English because I'm talking about Brazil. Thanks!

where can I get the nose piece for the inserts?

@SafetyGlassesUSA

Ай бұрын

Thanks for your question. You can find replacement P-2B Rx Nosepieces on the ESS website. esseyepro.com/en_us/accessories/eyeshield-accessories?cat=53

ok i have the urx and they are super stupidly big now are these p2b alot smaller, ilove the crossbows but i have 5" between my face and the lenses thanks

@SafetyGlassesUSA

9 жыл бұрын

Did you use the included nose piece from the URX Kit? I just pulled our Crossbow display model and did a test install with the URX insert. The URX insert fits snug to the lens and the glasses still sit close to the face.

@Moaximenes

3 жыл бұрын

With the URX Insertion, can I put them directly on the glasses or do I have to change them in the video? Mine is for sports shooting, so I'm not at risk of shooting the lens all the time.

@hambone950

3 жыл бұрын

@@Moaximenes u need to change them out with the nose piece.

@Moaximenes

3 жыл бұрын

@@hambone950 I meant if I can put the URX directly in the original nozzle or do I have to change the nozzle also in the video and put the P2B nozzle? www.amazon.com/-/pt/gp/product/B005GRFG2O/ref=ox_sc_act_title_2?smid=A2VPFLILXJ00UA&psc=1 Can I put this straight on the original nozzle?

@hambone950

3 жыл бұрын

@@Moaximenes it comes with a nose piece. and no you have to have that nose piece for the rx system otherwise it will not work.

I have those and they are terribly narrow, also ppl make jokes on me when i wear it