This the best video that I’ve ever seen for the module thanks💪🏽

@559powerscape

3 жыл бұрын

Thank you glad you found this useful!

Great step by step tutorial! Best one I've seen.

@559powerscape

Жыл бұрын

Thanks brother, im glad this helped. Thank you for your Support 🙏

Hey I was checking these out but wanted to see what's involved I gotta say you explain everything straight forward n ya make it easy to learn how to do stuff 💯 so thanks

@559powerscape

Жыл бұрын

Thanks brother im glad this helped. Thank you for your Support 🙏

You’re a good dude bro. Ur Family Man, Good Hearted , & A Foo 😂 Thanks For Making the Video!!! Now Ima Try On The Gs300 Myself. Never did the whole like,comment, share part a Vid but loved this one 🎉

@559powerscape

2 ай бұрын

🤣🤣🤣🤣 thanks brotha i hella appreciate your support 🙏

nice job - you make it seem so easy

@559powerscape

3 жыл бұрын

Lol I try

Thanks I needed to know about regular Bulbs😖🙏🏽

That was good thx for the help

@559powerscape

3 жыл бұрын

Your welcome, thank you for your SUPPORT!

You’re great bro!!!!!

@559powerscape

2 жыл бұрын

Thanx bro

Thanks bro very helpful information

@559powerscape

2 жыл бұрын

Your welcome, thank you for your Support!

Thanks just made it simple for a Honda Accord

@559powerscape

2 жыл бұрын

Heck yeah im glad this helped, thank you for your Support!

Quick question? My car have 2 red cable and 1 black cable and 1 green cable? How I should know what’s the brake light cable ?? I have accord 2013 LED taillight.

Great help broh,

@559powerscape

4 ай бұрын

Thank you for your support, I'm Glad this helped!

I had bulbs go out on 3rd brake light on a car bought recently i replaced bulbs then it was blinking 4 or 5 times then stay solid i have been thinking something wrong i almost bought new light i quess it has strobe never had of this thanks atleast i learned something and my light fine😂😂😂

@angelchiqui8351

5 ай бұрын

4 times is legal

Your boy was too cute haha

@559powerscape

2 жыл бұрын

🥲 thank you

I had to look this up because it's been years since I done it

@559powerscape

2 жыл бұрын

Glad this helped brother 🙏 Thank you for your Support!

Hi George This is an odd question, but Ai am totally lost. Years ago I installed the 100a's - one to each brake light (NOT 3rd). Now the place where I go for inspection said they won't pass my 2014 Hyundai Elantra Limited because of the strobing, and that as of January of this year they are "cracking down" on these mods. The problem is I removed my tailights to disconnect the modules and they aren't there......and I have no clue where I could have installed them. I'm sure I had followed instructions when I installed them, but totally forgot how I put these suckers in......I am not car mechanic by any means and whould not have attempted a difficult install. Do you have any insight of how I can revert my l & r brakelights to be normal?

@559powerscape

Жыл бұрын

If you didn't find them when you remove the taillights it's impossible that you just did the light bulbs instead they sell light bulbs that do strobing effect

❤

Thank you so much for the update and how to connect the controllers to make your light stroble light flasher they gave me for control I was able to do the third brake light they told me as soon as I do the third brake light I can also have the same two lights in the bottom at the same time with the third brake light unfortunately I have a 2006 Mitsubishi Eclipse with LED brake lights how do I go by making those LEDs also flash 4 times with the strobe light so I can have my third brake light in the two bottom ones flash with the third brake light at the same time how do I go by that because the light on a 2006 Mitsubishi Eclipse GS LED brake lights and everytime I take out the light bulbs that LEDs are still letting up red so how do I spice into the LED brake light for a 2006 Mitsubishi Eclipse GS GS Coupe I appreciate if you could let me know where do I have to splice into the wires

@559powerscape

10 ай бұрын

oh dang unfortunately you would need a volt meter to determine the ones to tap into

Any idea why it works perfectly when lights are off bit does go through flashing sequence when lights are on. (L.E.D motorbike)

@559powerscape

6 ай бұрын

I honestly dont. I think cause its LED taillights, it works good with halogen bulbs

Quick question. On the module, the inner part is black to black and red to red, on the outer part it’s black to black and red to red or red to green?

@559powerscape

Жыл бұрын

you have to see what wire activates your brake lights

Hey Man Can u explain To me how to do it on the honda accord 2006 Ex 🥺i bought the stuff but idk how to put it it looks hard( and is it on any car frfr ? Im scare i mess it up or something) !

@559powerscape

Жыл бұрын

You have to do it just like i did on this video @2:12 using a volt meter. You have to find out wich one is active 12volts with the lights on, the other will be the brake light. You have to split the ground and brake wire. If you dont know how, I suggest seeking help. This is electrical work, and very important lights

Aren’t both brake lights fed off the same circuit allowing for only one module to be necessary?

@559powerscape

Жыл бұрын

I don't know, I rather not over load it

hey so i was wondering if i can make it blink 4 times and then go solid? is there any way where i can manipulate the pattern?

@559powerscape

2 жыл бұрын

No its all in the device ur using. Different devices will give you Different strobe patterns

@Chloeclapp2344

Жыл бұрын

his model is 100. look up 101, it strobes 5 times

if you can tell me pls, if it work on toyota corolla trunk wing, it has about 30 tiny incandesent bulbs you think it will work

@559powerscape

3 жыл бұрын

Yeah I see why not it's the module that's proving the voltage for the affect

@javierposada7463

3 жыл бұрын

@@559powerscape thx a lot

@javierposada7463

3 жыл бұрын

@@559powerscape THX a lot I installed it today, it works pretty good.

This should work for a 3rd break light too right?

@559powerscape

10 ай бұрын

yes sir as long as its wired to it

can the 2 black wires be grounded to any metal bolt on the bike?

@559powerscape

Жыл бұрын

Yup sure can its just ground signal

They work better with leds bulbs

Hey can someone help me figure out what wired are the ones im supposed to cut on a 370z 2016

@559powerscape

2 жыл бұрын

If you use a volt meter to see which wire is the one for the brakes....makes it easier

Hola amigo yo compre 4 strobe controller for led stoplight y no hacen la función que tenia que hacer no que paso gracias.

@559powerscape

2 жыл бұрын

Alomejor no sierbe. Trata de regresarlos. Deveria de connectar y parpariar. Maybe they dont work. Try replacing them. All you have to do is connect them and they should strobe...power on one side...in and bulb on other...out.

@miltonespino40

2 жыл бұрын

Los compre en Ebay gracias por tu respuesta tengas un buen dia.

@559powerscape

2 жыл бұрын

@@miltonespino40 si se puede. Mandales mensange que no trabaja y te mandan otros

*THis module is only effective on the (Third) high-level stop light and then primarily if the light is all LEDs. Blinking tail lights are confusing and not safe.*

@yuh.pringle

2 жыл бұрын

It’s totally safe, it keeps drivers behind u alert and can actually prevent a lot of rear ends as long as for flashes aren’t too fast

@atb1040

Жыл бұрын

These aren't meant for brake lights, this guy is a moron

this is tricky for an nissan altima 2015

I tried installing these, but the pattern would continue recycling if I kept my foot on the brake long enough. Is it supposed to recycle? I want it to flash the pattern once and then stay on continuously. Do you have a link to where you got yours from?

@559powerscape

3 жыл бұрын

Yeah....www.ebay.com/itm/303682736487 Hope this works!

They didn’t use the black on my Nissan maxima

@559powerscape

Жыл бұрын

Still would be good to ground the unit

Thanks great video. I installed mine on my motorcycle, they work, but then when I press the brakes again for a second time the brake lights act normally. I have looked around and can’t seem to find an answer anywhere. Has anyone heard of this issue before? I’ve tried waiting up to a few minutes with no luck. Everything is wired correctly according do this and other videos.

@559powerscape

3 жыл бұрын

No way so it only doest it once? It should do it every time you press the brakes....maybe it's defective....I would message the seller and see if they can possibly send a replacement

@zeronomon

3 жыл бұрын

Yup, it’s the strangest thing. I triple checked my connection work. It does the flashing pattern and works fine, but then once I apply the brake for a second time the brake light works as if the module wasn’t there. It’s the exact same model module as yours. Too bad it’s all soldered in. Looks like I’ll have to get a new one. Cheers buddy.

@559powerscape

3 жыл бұрын

@@zeronomon man im sorry to hear that

@hungngo3415

2 жыл бұрын

They have a 30 second relay or delay???

@559powerscape

2 жыл бұрын

No this strobs then holds them on

Hey if the kid approves they’re a go 😅

@559powerscape

Жыл бұрын

Lmfao FACTS! Thank you for your Support 🙏

Them shyts are wack , but very informative

@559powerscape

6 ай бұрын

LOL

EZ