great video.. especially if you play it at a slow speed! Makes it super easy!
@greenwave819 Жыл бұрын
Just got the rear rack and basket. it was pretty simple to put them on, Only part that was slightly difficult was getting the basket to go on below the quick release, it didn't quite want to fit but after a couple adjustments I got it all set.
@crimson_oracle11 ай бұрын
The nut for the quick release hits the fender, how is that supposed to work?
@KingCarrotRL Жыл бұрын
0:30 This is simple enough... If you have 4 arms 👍
@gozwest Жыл бұрын
Should the front rack be more or less horizontal? Some pictures and my fork bracket is angled such that I think it will lean forward significantly. I have not installed it yet, but wanting to know if I should try to bend the bracket so that the rack lies horizontal.
@lordbacon4104 Жыл бұрын
After riding it for a while the quick release cuases the basket to not be fully secured which will make it rattle back and forth when hitting slight bumps and anything that's rough. I understand the quick release is supposed to give you more options with the front rack but I would recommend having a screw or two atleast to tighten it down. This isn't on the video but there is a screw under the quick release that does help with this but not 100% and i think I almost broke it since it's plastic. honeslty it works fine on flat roads and everything.
@lordbacon4104 Жыл бұрын
Also might I add he switches what screw he used to attach the light because the one provided is to short so you can't even attach it
@ToddLynda11 ай бұрын
I can’t get enough slack on the light either and the screw on the quick release hits the fender.
@user-ik8vy1rg8f Жыл бұрын
0:34 - I'm pulling very hard and can't get any more slack for the front light. It feels like I'm going to break something. Ugh, I had to go into the rats nest control board at the bottom of the bike using the special star hex tool to get that extra slack and untie the coil of cables at the top portion.
@saraspanjers770
Жыл бұрын
I pulled my front light straight out by trying to get the slack as listed...warning to all it didn't take much force!
@ritaamesbury1463 Жыл бұрын
I am trying to guess if my two 6 pound yorkies would fit together in this basket. What are the inside dimension?
@greenwave819
Жыл бұрын
4x1gallon jugs fit exactly.
@AD-xn7pt
Жыл бұрын
@@greenwave819 you have the basket? Can you measure the inner dimensions if possible please? You have it attached to the front or back? 😅
@chocolatedaddy1270 Жыл бұрын
Would have been good to know that you need the front rack to put the basket on. Waited 2 months to get basket on back order just to not be able to use it.
@greenwave819
Жыл бұрын
how did you not know that? The basket cannot hang on air. However it does work for the rear rack also
@lordbacon4104 Жыл бұрын
Now I need some screws I've never been so annoyed that I can't put crap together
@user-ik8vy1rg8f Жыл бұрын
0:31 - Ugh. Again you guys just zoom on through things without finishing or even showing the full tool on camera.
@user-ik8vy1rg8f
Жыл бұрын
No indicator on which end if the flimsy aluminum bracket goes where, where to put the washers, how high on the fork to placate support arms. What to do with the included velcro and 3M cushioning. No instructions included.
@greenwave819
Жыл бұрын
@@user-ik8vy1rg8f I had no issues at all
@user-ik8vy1rg8f Жыл бұрын
0:40 - Ffs, you did it again. Fast forwarding way too fast so I can't see what you're doing.
@user-ik8vy1rg8f
Жыл бұрын
It feels like I'm going to break it removing the extension.... - - - OK, it does just pull out. There is a serrated washer thing in there gripping it but you can widen the grip of the plastic with your hands.
@greenwave819
Жыл бұрын
you just have to pause. it is not a big deal
@childofthesoftgrass2228
11 ай бұрын
Yup. At least they tell you which side the washer goes on in this vid, since it is not intuitive for everyone.
@willfruehling1234 ай бұрын
The quick release element with springs is a shit design! They won’t stay in place and spring apart. Designer is an idiot!
@douglash975 Жыл бұрын
Absolutely the worst build I have ever done. So impossibly annoying. Worse than building a basketball court. I ripped the light power supply it doesn't just pull out then I had to Frankenstein the thing back with some buts and an old power supply. Then the spring thing is so dumb pops off. Has a little nut that hits the fender. Very poor design and the most annoying thing I have ever done. Hate you ride 1 up.
@greenwave819
Жыл бұрын
that sucks for ya bud. I thought it was pretty simple
Пікірлер: 28
great video.. especially if you play it at a slow speed! Makes it super easy!
Just got the rear rack and basket. it was pretty simple to put them on, Only part that was slightly difficult was getting the basket to go on below the quick release, it didn't quite want to fit but after a couple adjustments I got it all set.
The nut for the quick release hits the fender, how is that supposed to work?
0:30 This is simple enough... If you have 4 arms 👍
Should the front rack be more or less horizontal? Some pictures and my fork bracket is angled such that I think it will lean forward significantly. I have not installed it yet, but wanting to know if I should try to bend the bracket so that the rack lies horizontal.
After riding it for a while the quick release cuases the basket to not be fully secured which will make it rattle back and forth when hitting slight bumps and anything that's rough. I understand the quick release is supposed to give you more options with the front rack but I would recommend having a screw or two atleast to tighten it down. This isn't on the video but there is a screw under the quick release that does help with this but not 100% and i think I almost broke it since it's plastic. honeslty it works fine on flat roads and everything.
Also might I add he switches what screw he used to attach the light because the one provided is to short so you can't even attach it
I can’t get enough slack on the light either and the screw on the quick release hits the fender.
0:34 - I'm pulling very hard and can't get any more slack for the front light. It feels like I'm going to break something. Ugh, I had to go into the rats nest control board at the bottom of the bike using the special star hex tool to get that extra slack and untie the coil of cables at the top portion.
@saraspanjers770
Жыл бұрын
I pulled my front light straight out by trying to get the slack as listed...warning to all it didn't take much force!
I am trying to guess if my two 6 pound yorkies would fit together in this basket. What are the inside dimension?
@greenwave819
Жыл бұрын
4x1gallon jugs fit exactly.
@AD-xn7pt
Жыл бұрын
@@greenwave819 you have the basket? Can you measure the inner dimensions if possible please? You have it attached to the front or back? 😅
Would have been good to know that you need the front rack to put the basket on. Waited 2 months to get basket on back order just to not be able to use it.
@greenwave819
Жыл бұрын
how did you not know that? The basket cannot hang on air. However it does work for the rear rack also
Now I need some screws I've never been so annoyed that I can't put crap together
0:31 - Ugh. Again you guys just zoom on through things without finishing or even showing the full tool on camera.
@user-ik8vy1rg8f
Жыл бұрын
No indicator on which end if the flimsy aluminum bracket goes where, where to put the washers, how high on the fork to placate support arms. What to do with the included velcro and 3M cushioning. No instructions included.
@greenwave819
Жыл бұрын
@@user-ik8vy1rg8f I had no issues at all
0:40 - Ffs, you did it again. Fast forwarding way too fast so I can't see what you're doing.
@user-ik8vy1rg8f
Жыл бұрын
It feels like I'm going to break it removing the extension.... - - - OK, it does just pull out. There is a serrated washer thing in there gripping it but you can widen the grip of the plastic with your hands.
@greenwave819
Жыл бұрын
you just have to pause. it is not a big deal
@childofthesoftgrass2228
11 ай бұрын
Yup. At least they tell you which side the washer goes on in this vid, since it is not intuitive for everyone.
The quick release element with springs is a shit design! They won’t stay in place and spring apart. Designer is an idiot!
Absolutely the worst build I have ever done. So impossibly annoying. Worse than building a basketball court. I ripped the light power supply it doesn't just pull out then I had to Frankenstein the thing back with some buts and an old power supply. Then the spring thing is so dumb pops off. Has a little nut that hits the fender. Very poor design and the most annoying thing I have ever done. Hate you ride 1 up.
@greenwave819
Жыл бұрын
that sucks for ya bud. I thought it was pretty simple
This is a terrible video. Why is it sped up?