This is the real teaching how to connected the adapter wheel....thank to you bruh...others youtuber just showing unnecessary action like skru up,how to open skru,how to lock skru,how to pull up steering wheel then just finish..just like that...

Thank you, I've did it step by step and it work like a charm, now I have to install the horn and I'm set.

@rayregnogarage

3 жыл бұрын

Awesome. Glad you found it helpful!

Thanks for making this dude. I knew about the SRS procedure from working at Acura for so long but the parts list you put together is awesome. Can’t wait to get all this put together

@rayregnogarage

2 жыл бұрын

glad you found it helpful!

Best hub/quick release video install

@rayregnogarage

3 жыл бұрын

Thanks!

Man, the horn shoe tip was EXACTLY what I needed! Thank you!

@rayregnogarage

2 жыл бұрын

Awesome! Glad you found it helpful!!

@EddieSwaggy

2 жыл бұрын

@@rayregnogarage do honda still sell this horn shoe?

@rayregnogarage

2 жыл бұрын

@@EddieSwaggy they should. it's a genuine honda part. www.amazon.com/gp/product/B00P4CWRUK?ie=UTF8&psc=1&linkCode=sl1&tag=rayregno-20&linkId=298f81428a134aadc15f83d4e2f4ab2d&language=en_US&ref_=as_li_ss_tl

@EddieSwaggy

2 жыл бұрын

@@rayregnogarage thank you bro appreciated

Wow great video man, probably the best explanation I've ever seen on any mod on KZread. Definetly gonna sub ✌

@rayregnogarage

2 жыл бұрын

Awesome! Thanks!!

This is the video I was looking for... Doing it for my 99 CRV. Thanks!!

@rayregnogarage

6 ай бұрын

Glad I could help!

Awesome video my guy, currently following the instructions. However, I'm using a nrg short hub with no attached wires but the package includes 2 jumper pigtails with fused ends. I'm going to go ahead and assume that at some point you reconnected the batt, aligned the hub str8, so that the horn work. This is for those who might be lost there. Keep these videos coming tho. Very helpful!

Good job, man.

@rayregnogarage

Жыл бұрын

thanks!

Will this still work if I added the resistors in steering wheel where the airbag sits vs behind the clock spring for the airbag wires ? I assume it shouldn't matter

@rayregnogarage

3 жыл бұрын

Yes for sure. I’ve done that on 3 of my other cars and that’s where I normally put the resistor. The integra was just a lot easier to trace the airbag wire so I thought I’d try behind the dash because that space inside the hub adapter is so small compared to how it is on my others cars.

I installed one one my car but the steering wheel nut doesn't go all the way on, it's half way on. I tightened it pretty tight but I don't know if I did something wrong or not everything is lined up though.

@rayregnogarage

3 жыл бұрын

That's super weird. Can you DM me a picture of it to my IG account? @strongholdgarage

Happen to have a link to get that brass piece? The OE one on mine doesn't have notches like yours that fit on that nrg adapter

@rayregnogarage

Жыл бұрын

I post links to everything I use in each video in the description of the video

Do you need the shoe horn only if you have a quick release setup? I have works bell hub w no quick release

@rayregnogarage

8 ай бұрын

Dunno if that one has a way to connect the ground. Even if I just bolted the wheel directly to the adapter, I would need the shoe horn for the NRG. The adapter and the quick release are separate.

The step you do at 7:00-7:03 works fine for me Once I get to 8:22 the Horn won’t work when I press the Horn on the steering wheel and make the wire touch the shoe Horn it won’t work. If I grab the wire and make it touch a Metal piece then I can hear the horn. Any idea what could be the issue? I follows everything step by step. I also got rid of the airbag light by following your instructions so thank you for that!

@rayregnogarage

2 жыл бұрын

Did you the bend the shoe horn so it’s touching the metal part on the back of the hub adapter?

@luisito0392

2 жыл бұрын

@@rayregnogarage yes it’s making good contact.

If you wanna pull a steering wheel off you should screw the steering wheel nut on a couple threads so it doesn't pull the clock springs out with the steering wheel or hit you in the face

@rayregnogarage

3 жыл бұрын

That was definitely an issue on my Xterra, but the Acura was super easy. No tugging required. Just removed the nut and the wheel came right off

I think many of us been there with breaking the clockspring lol

Do I have to disconnect the red side as well on the battery? Or I’m fine with just disconnecting the black?? 2:26

@rayregnogarage

3 ай бұрын

i just disconnect the black

Srs light trick is to pull the cluster and unplug it

@rayregnogarage

3 жыл бұрын

That’s one way to do it

Hey I don’t the notches on the steering colum does that really matter

@rayregnogarage

2 жыл бұрын

That’s weird. What year is yours?

Can I just use some electrical tape to connect both red and blue wires together??

@rayregnogarage

3 жыл бұрын

You could but it might not not stay that well and loose connections are no bueno

Hey bro my 95 integra LS doesn't have that honk harness. I see you have a honk male plug and I dont have that. Its has a single ground wire that is joint alone with the whole in-dash harness. So once I pull out the harness, the wire for horn comes out too. I can't trace the horn itself. Any idea how I can install the horn wire? My wire is different from yours.

@rayregnogarage

3 жыл бұрын

What color is the wire? The horn wire should be blue and if you touch it to anything metal it should activate the horn. You'll need to extend it with a piece of wire to wire it like I did.

@natedoggcfw7056

2 жыл бұрын

I have the same issue, not sure what to do. I’m gonna keep looking for it and I know it’s been 11 months sense you posted this but if you find it let me know!

@reglus15

2 жыл бұрын

@@natedoggcfw7056 I figured the issue. Message me on ig @reglus03

@natedoggcfw7056

2 жыл бұрын

@@reglus15 just followed you!

@reglus15

2 жыл бұрын

@@natedoggcfw7056 ok you are mjphotography?

Does any of this affect the turn signals ?

@rayregnogarage

Жыл бұрын

nope. not at all

Also couldn’t you just mount the shoe horn connector on the right so you don’t have to extend the horn wire? Thanks

@Singlecamsam

7 ай бұрын

And should my battery be off for this?

@rayregnogarage

7 ай бұрын

Should always have the battery off when dealing with electrical. Def do it before you remove the airbag.

do the autocanceling turn lights still work?

@rayregnogarage

3 жыл бұрын

lol. i don’t use my signals. but without the clock spring it won’t auto cancel

@leochanel1

3 жыл бұрын

for anyone thats interested, my auto cancelling lights still worked after installing the short hub adapter, i did not install the horn

i know this video is pretty old but what would the raised brass piece be called my car needs a new one and i can’t seem to find one anywhere

@rayregnogarage

2 жыл бұрын

It’s a shoe horn connector. Here’s a link for one on Amazon that i used. amzn.to/30AELM2

@vintagelsd2828

2 жыл бұрын

@@rayregnogarage sorry not that one but the piece on 4:31

@rayregnogarage

2 жыл бұрын

@@vintagelsd2828 Ah. Ya. I dunno what that's called. Sorry

Questions how come my quick release is hard to turn.? For my CR-V 2000

@rayregnogarage

3 жыл бұрын

Not sure. what size is your new steering wheel compared to the old wheel? Did you use a torque wrench to tighten the steering wheel lock nut? Ive got the quick release on three of my cars and the Honda is by far the smoothest.

@ANIME-xy4iu

3 жыл бұрын

@@rayregnogarage well the brand is RTD from eBay and it's 1 x330 mm steering wheel. Was it supposed to be hard to turn if steering wheel is change? My brother told me the smaller and the light the steering wheel is going to hard to turn?

@rayregnogarage

3 жыл бұрын

Ah I can’t really answer what’s going on with the eBay product. I’ve never seen or used that. I had a 320mm on my xterra and I felt like it was too squirrelly for me. Small inputs into the wheel made the front wheels too jumpy on the freeway. I like a bigger wheel. I use a 350mm Momo and like it a lot. Does your car have power steering? Have you checked the fluid?

I need help when I hook up the wire all it does a clicking sounds no horn but when I set my alarm it works

@rayregnogarage

Жыл бұрын

The alarm connects to the horn on a different circuit. Where did you connect the wire?

@dustinshull9344

Жыл бұрын

I hooked my horn up like you did but I’m not sure who hooked up the alarm

Where did you find the wire for the horn?i cant find it. Maybe you can help me

@rayregnogarage

4 жыл бұрын

It's on that connector that you disconnect from the back of the clockspring. Third terminal. I show how to find it in the video. Blue wire

@jaypilot6374

4 жыл бұрын

Stronghold Garage crazy some how i cant find it 🤦🏻‍♂️,its been 3 years my car dont have horn.

@jaypilot6374

4 жыл бұрын

Maybe its different coz i have 99 integra?

@rayregnogarage

4 жыл бұрын

maybe. I don’t know of a change between the two. pretty sure the 98-01 are the same.

Why is my alignment off now? Did I install wrong?

@rayregnogarage

Жыл бұрын

ya maybe. You gotta make sure you keep everything straight when you install the hub.

Where to get the horn connector

@rayregnogarage

Жыл бұрын

Amazon or a local honda dealer. I put part number in the description. I recently bought another one and it worked on my Toyota.

Where can I buy a shoe horn connector, I need this for the horn to work on my jzx100

@rayregnogarage

Жыл бұрын

I put a link in the video description

@Dkzdream

Жыл бұрын

@@rayregnogarage thank you bro! Going to make a KZread video on how to install on jzx100 and mention you and put your video in the description

@rayregnogarage

Жыл бұрын

Awesome! I literally just used the same part on my 94 4runner on Sunday. I had to bent it around to make it work, but it works. I’ll post my video in a few months probably. haha. I’m take forever editing.

My steering wheel goes to the left alittle whenever I’m driving straight not sure what I did wrong.

@rayregnogarage

3 жыл бұрын

Were your tires perfectly straight when you removed the factory steering wheel? It's also possible when you put the hub adapter on the steering column that it was off by a tooth or two. I did that in my xterra and had to take it apart and readjust a couple times.

@supremegaming6532

3 жыл бұрын

@@rayregnogarage yes I’m pretty sure the car was straight when I put it on, I uninstalled it a couple of times and put it on again but still the same thing probably off by a little like you said.

@rayregnogarage

3 жыл бұрын

@@supremegaming6532 one tooth off can make a big difference

I don’t have a wiring harness for my horn it looks like a belt

@rayregnogarage

Жыл бұрын

follow the belt further down…it’s probably connected to a bundle of wires

9:40 I just cleared the code and it went away:). I guess that might be why my horn won’t work. My hub never came with that comped piece. Where did you buy it?

@rayregnogarage

3 жыл бұрын

I put a link to it in the description of the video

@justinguarino201

3 жыл бұрын

@@rayregnogarage And this will fix it? I’ve seen other videos where there is no mention of it, so wasn’t sure if that’s what I need

@rayregnogarage

3 жыл бұрын

Mine works

@justinguarino201

3 жыл бұрын

@@rayregnogarage Just ordered it :)

@rayregnogarage

3 жыл бұрын

@@justinguarino201 Nice.

Are you in SD? Do you have a shop?

@rayregnogarage

Жыл бұрын

I’m part time SD and part time in Washington. I don’t have a shop. Not one there open to the public at least.

I have a 95 civic would I need a short hub for it ?

@rayregnogarage

3 жыл бұрын

What are you trying to do?

@noahreyes3096

3 жыл бұрын

@@rayregnogarage I'm trying to install a quick release and I got a quick release kit so I was just wondering if I need a short hub

@rayregnogarage

3 жыл бұрын

@@noahreyes3096 Did the quick release kit you bought come with an adapter? If it's an NRG kit, the hub usually comes separately.

@noahreyes3096

3 жыл бұрын

@@rayregnogarage yeah it did

@rayregnogarage

3 жыл бұрын

You should be fine then

You're 40?! You look 27-30.

@rayregnogarage

4 жыл бұрын

Ha. yup. born 1980

You can just touch both battery cables together to discharge the capacitors in all of the cars modules/computers in less than 5 minutes. Still want to be careful with airbags. Static electricity can set them off.

@rayregnogarage

Жыл бұрын

Good tip! Thanks!

simple,take that dash off...and remove that bulb srs!!

@rayregnogarage

3 жыл бұрын

Ya...you could probably do that. But also wanted to show a more clear way to clear the code. The other videos I found weren’t as detailed as I would have liked

40!😱 You barely look like you're 20🤨

@rayregnogarage

2 жыл бұрын

Ha. 41