Here's how I swapped the original length DJI O3 air unit camera coaxial cable for the extended one that I purchased from Pyrodrone. This will take it from about 110mm to 170mm length. The little parts are a bit fiddly, and you do need to be gentle with the tiny connectors and parts, but otherwise it's a pretty easy switch.
pyrodrone.com/products/dji-o3...
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #djiO3