How To Install Hood Struts On A Nissan Xterra/Frontier/Pathfinder
Автокөліктер мен көлік құралдары
I might be a little behind on this but I finally got around to installed Hood Struts on the Xterra and I cannot believe I didn't do this earlier. It holds you hood up higher and you don't have to deal with the prop rod any more. Good stuff! If you want to pick up the parts you can check out the links below. This kit will work with the Xterra, Frontier, and Pathfinder.
Off Road Gorilla (the kit I used): www.offroadgorilla.com/shop/n...
Check out my Amazon store for the parts I use on the channel: www.amazon.com/shop/influence...
Check out the Official RTCG website! rtcg.tv
Support the channel and get a cool t-shirt: represent.com/store/ry-the-ca...
***As an Amazon Associate I earn from qualifying purchases by use of affiliate links.
#howto #diy #auto
Пікірлер: 187
Ive noticed from my experience everyone I beleive is installing the arms the wrong way, I installed them like that and the one arm on its own would not hold the hood up but if you install them the other way with bigger part on the frame and smaller part on hood one arm will hold the up on its own making it easier to install the other side
I bought and installed these based on your rec and it is strangely satisfying every time I open the hood. Thanks.
@Rythecarguy
2 жыл бұрын
Isn't it great!?! Glad you like it. 🤘🏻
Just installed a set last week. Easy install and very convenient.
@Rythecarguy
2 жыл бұрын
Great to hear!
just did this, super simple, awesome upgrade. love the hood opens wider for better access!!! super cool improvement with minimal investment.
@Rythecarguy
Жыл бұрын
Right on!
Just installed these on my 2005 Xterra Off Road. Funny how something as simple as this makes all the difference in the world. Thanks for this tutorial and recommendation! Didn't even need to add the washers!
This was my best investment on my Xterra so far. And I've got a new suspension, skids, sliders and front bumper. It's so convenient.
@Rythecarguy
2 жыл бұрын
Convenience mods are where its at. 🤘🏻💪🏻
nicely done ! this was one of the 1st mods that I did to my Xterra when I got it well also because its so cheap and easy lol , but O just got them off ebay and they been pretty good so far its been a year..
@Rythecarguy
2 жыл бұрын
Right on!
I just installed the struts thanks to your video (it came with no instructions, but I do see the vendor has linked your video). One word of caution, if the hood slides off the original bracket before you can get the strut bracket on there, it can flip up and torque over the prop rod putting a huge strain on the opposite hinge (I found out the hard way, fortunately I did not bend the hood). Great video!
@wellnessotr
9 ай бұрын
yes! I broke the tip of my prop rod this way.
This was the first mod I did to my Xterra when I got it. Worth every penny and took less than 5 minutes to install.
@Rythecarguy
2 жыл бұрын
Hell ya. Wish I did thinks years ago. How are your struts holding up?
When I watched this, a year, or so, ago, and discovered that this was an option (installing the struts), I must say that it was one of the best things I did on my XTerra! I just wanted to drop by and say THANK YOU! 😉😃
@Rythecarguy
10 ай бұрын
Youre welcome. Glad you love them. Quality of life upgrades are some of my favorites.
Aww Ryan I just did this on my X and was looking for a tutorial from you! I was accidently installing it upside down! We the people need your guidance!
@Rythecarguy
2 жыл бұрын
Sorry Steve! Maybe next time,
Nice video, helpful to me. 2021 Frontier. 👍😎👍 This kit was easy, so easy even an engineer can do it! I did use medium strength thread locker, aka Blue Loctite.
Thanks for the PSA! I just did mine a few weeks ago and love it already!
@Rythecarguy
2 жыл бұрын
YW, same. Its really great.
Just as an aside, this worked like a charm on my 07 Frontier LE. Thanks!
@Rythecarguy
2 жыл бұрын
Excellent! Thanks for letting us know. 👍🏻
Much appreciated for the video. Happy Holidays
@Rythecarguy
Жыл бұрын
Thanks, you too! 💪🏻
Just did this mod a few weeks ago. Should have been a stock feature. Totally worth it!
@Rythecarguy
2 жыл бұрын
Agree! Wish I did it years ago. Same with the under hood lighting.
@CoachCole71
2 жыл бұрын
@@Rythecarguy Under Hood Lighting is next. Just rewatched your video on that too!
Just ordered this... thanks (as always)!
Have a beer, good man! haha good content, every time I need to do something on my xterra, you are the first option
@Rythecarguy
Жыл бұрын
Thank you, my friend! I appreciate it!
Just installed this mod...thanks to this video.
@Rythecarguy
Жыл бұрын
🤘🏻🤘🏻
Just installed my kit today!. Soo much more room!
@Rythecarguy
2 жыл бұрын
Hell yea! 💪🏻
Just knocked this out pretty quick, referencing this video to see which way things are supposed to face. The kit I got from Z1 had some annoying pins that my fat fingers kept dropping, but otherwise easy. Took around 10 minutes including looking for a pin I lost under the truck. Next up, rear hatch struts to replace the ones that aren't quite as strong as they should be
Nice easy installation. Looking at same for my Frontier.
@Rythecarguy
2 жыл бұрын
Same kit, go crazy my dude.
Pretty slick. I'll have to look into doing that. 👍😎
@Rythecarguy
2 жыл бұрын
You should! Its amazing.
I bought these same struts too and i will say check the fitment after driving a little while. Mine were making contact with the mounts and causing the hood to bow up a little. Tried to make adjustments but no luck. I was really disappointed, made it super easy to work on the truck and pushed the hood higher up when open. Back to factory. Great video though! Side note I have a Frontier, not a xterra. The xterra might have more room between strut and mount.
@Rythecarguy
2 жыл бұрын
Thanks for the info. Ill keep an eye on them.
I loved that I did this to mine! I still had trouble on the driver side with on of the stock bolts. Had to use a self-tapper to secure it, but no worries!
@Rythecarguy
2 жыл бұрын
Awesome! Glad it worked out.
@RiNoSupplyCompany
2 жыл бұрын
@@Rythecarguy Yeah, the prop rod was basically, constantly, falling out of it's spot, along with the bushing.
Dude thanks for the video!! Definetly doing this to our xterra overlander soon.
@Rythecarguy
2 жыл бұрын
Just an awesome upgrade. You'll love it.
I don't even own an Xterra anymore, but find myself watching the video anyway...nicely done Ry!
@Rythecarguy
2 жыл бұрын
Thanks for the support! 💪🏻
Was my first mod...do this to most of my vehicles. Its 2021, so dumb today's cars dont come with these from the manufacturer. The under-hood lights is also a no-brainer i wish manufacturers did...i mean..who needs to see under the hood lol. Another quality video by Ry! ^_^ btw...i dont think you've done exhaust yet on your X yet..but i put on an AF intake and an AFE Power cat-back exhaust within the last few weeks...these are both really good mods as they make the X sound like a whole new level (with a slight power bump to boot).
@Rythecarguy
2 жыл бұрын
Thank you! Glad you like it and I agree. Exhaust is a great idea. I plan to do it one day but I'm in the middle of this damn engine rebuild lol. Once that's over I am going to start modding the X again.
Just placed my order!
@Rythecarguy
2 жыл бұрын
Awesome! You're going to love it!
Just the video I needed! Thanks buddy!
@Rythecarguy
2 жыл бұрын
You got it! Oh hey, I still owe you an email.
@AllThingsOverlanding
2 жыл бұрын
@@Rythecarguy No rush at all man! Talk soon!
Thanks ry, doing this today finally! 😁
@Rythecarguy
2 жыл бұрын
Hope you love it!
I received my struts with no instructions. Thanks to your video I was able to install them with no problem.
@Rythecarguy
Жыл бұрын
Heck yea! Glad you got em on. Amazing right?!
Excelente , necesito comprar esos pistones , me encantan ! Saludos desde Costa Rica
@Rythecarguy
2 жыл бұрын
Deberías, son muy útiles. ¡Gracias por verlo!
Oh good! When I saw the thumbnail I thought you were going to make a case for why we should not put hood struts under it! Because I just put them on less than a month ago
@Rythecarguy
2 жыл бұрын
Oh yea, that kinda makes its sound like that doesn't it?
@shanelewis2458
2 жыл бұрын
@@Rythecarguy the title is clear but I didn't read it all I saw was the word goodbye and the picture
Just love this guy🥰🥰🥰🥰
@Rythecarguy
Жыл бұрын
Aww thank you! ❤️
I've been wanting to do this!!
@Rythecarguy
2 жыл бұрын
Do it! Sooo worth it.
I ordered this today, I look forward to installing when it comes in.
@Rythecarguy
2 жыл бұрын
🤘🏻👍🏻
@Rythecarguy
2 жыл бұрын
Hope it goes well!
@aeronasca
2 жыл бұрын
Did you ordered from the gorilla web?
@osky7777
2 жыл бұрын
I ordereded, installed and it exceeded my expectations. I love the convenience of the hood strut. No more propping up for me.
@aeronasca
2 жыл бұрын
@@osky7777 where did you ordered from?
Ryan, I love your videos! Your videos of the foglight and tailgate struts were so helpful. I'm considering putting in a set of hood struts. I'm not thrilled with the idea of the hood being misaligned because of slipping. Question: on the upper bracket there are two holes to go over the two studs on the hood. Would they still work if I cut off the piece/hole of bracket that goes closest to the windshield and just mount to farthest forward stud, thus eliminating the need to remove one of the nuts entirely? Thanks for your help! And good luck with the swap!
thanks for the tips ,usefull
@Rythecarguy
2 жыл бұрын
👍🏻👍🏻👍🏻
Well that took all of 15 minutes!thankyou.
@Rythecarguy
4 ай бұрын
Crushed it 💪🏻💪🏻
I love it!
@Rythecarguy
2 жыл бұрын
🤘🏻
Yes!!
@Rythecarguy
2 жыл бұрын
🤟🏻
Thanks!
@Rythecarguy
Жыл бұрын
No, thank YOU sir. I appreciate you.
I want this!
@Rythecarguy
2 жыл бұрын
Get it dude! It's not crazy expensive
@hotflashfoto
2 жыл бұрын
@@Rythecarguy Mine's a 2004. Dang. They fit only 2005-up. The body and fenders were changed a lot from Gen 1 to Gen 2. Do you think it would still work?
@angelcruz4323
2 жыл бұрын
@@hotflashfoto sorry they won't work for Gen 1.
Where can I get the grill set up you have on your frontier?That emblem is sharp!
like the add on for exterra
@Rythecarguy
2 жыл бұрын
Right on! It's one of those "small luxuries"
muy bueno gracias👍
@Rythecarguy
2 жыл бұрын
👍🏻
😢😢😢 I’ve been wanting to try this for a while. Finally got out there today. Not sure what happened - either my prop rod broke causing the bracket to come off the bolts or the bracket came off the bolts and broke my prop rod. At the end of the day, I’ve got a dog eared hood with scratched paint on both side edges and now that the new struts are installed my hood is locked so tight I can’t even reach the release trigger. 🎉🎉🎉
Great install Rye, but the benefit of the hood struts is not closing the hood, it's opening the hood, which was not shown after the install in this video.
You said “these nuts.” Twice!! 🤣🤣
@Rythecarguy
2 жыл бұрын
😂
Did mine awhile ago. We need a how to on the raptor grill led lights.
@Rythecarguy
2 жыл бұрын
Link for the grill? I'm intrigued
I’m doing this, but I’m wondering what size washer to use. I don’t have any laying around.
i would use loctite on those studs just for added confidence
@Rythecarguy
Жыл бұрын
Yea. Good idea.
Hi Ry I ordered the hood prop rod kit got and everything went well until time for the struts the will not compress I tried to push down on them they wouldn't move then place one on the tab thing for the bracket but the bottom strut will not align because it is extended out too far . Did you encounter any issues with this
@Rythecarguy
2 жыл бұрын
Yes, lift your hood up to line up the shocks.
Unable to find the part on your amazon page, and the gorilla site doesn't let me add it to a cart. Can you please list a part number for amazon, or any part number for these lift rods. Thanks.
Alright here i go!
@Rythecarguy
4 ай бұрын
You got this. 💪🏻
Hi Ry! I've been following your videos for my Xs DIY jobs. Thanks a lot! Do you have any video related to ATF replacement and ATF filter cleaning/flushing or replacement? What is the recommended interval for changing ATFs? God speed!
@Rythecarguy
2 жыл бұрын
Sorry, no. I have a manual transmission.
Can you please share a link on where I can purchase this kit.
@Rythecarguy
2 жыл бұрын
Its in the description of the video my friend.
What size washers did you use?
@Rythecarguy
2 жыл бұрын
I'm sorry but I don't know. They were just in a pile of washers sitting in my workshop.
I need this, l use scrap metal lol, Ry, are you having rear door issues? I’m having the issue with my x and l heard its common.
@Rythecarguy
2 жыл бұрын
What going on with it?
@jdkingsley6543
2 жыл бұрын
@@Rythecarguy intermittent functionality, some days it will open. Some days it wont. Some days it wont lock. This is passenger door on the drivers side. I did some digging and there was info on an issue with the locking mechanism.
Have you done a soft drop on your tailgate per chance?
@Rythecarguy
2 жыл бұрын
I have not. Didn't know that was an option. I'm very interested.
@mikemorgan4670
2 жыл бұрын
@@Rythecarguy Ueah me too. The tailgate on my Frontier is ridiculously heavy. Seen a few options but would rather make purchase decision with a good reference.
@josephbookim8451
2 жыл бұрын
@@mikemorgan4670 in case you still haven’t, it’s super easy just like this and while your doing it you can add a pop a lock for under 10$ if ur tailgate doesn’t auto lock like on my 16 frontier
Hey, did someone try those support in winter time/ colder weather? I had the tailgate assist support and in cold weather it failed...
@Rythecarguy
Жыл бұрын
Still works in the Michigan winter!
Do you know if this fits a first gen xterra? 04 to be exact
@Rythecarguy
2 жыл бұрын
I'm not for sure but I think this kit is just second Gen. Sorry.
hello. this struts and rear door struts are same size ? if they are, i will find rear door struts from junkyard
@Rythecarguy
2 жыл бұрын
They are not. They are different sizes
@gogatbilisigeorgia
2 жыл бұрын
@@Rythecarguy thank you
I bought a kit to put on my X. It did not fit. Someone in the forum said to " send it". Don't know what that meant so I "sent it" back. Felt defeated. What brand did you use
@Rythecarguy
2 жыл бұрын
lol the kids say "send it" when they mean "just do it, regardless of possible consequences". It's not very helpful advise. I originally bought a kit from Amazon that was not even close to fitting so I "sent it" back too LOL. I'm the video I used the kit from off-road gorilla. They were a great brand but I still had to use a washer to make it fit. Hope this helps.
I tried installing front hood struts on my 07 xterra but the metal and the screws are too soft and one of them strips so I had to forego the installation.
@Rythecarguy
Жыл бұрын
Oh gosh, sorry to hear that
What years would they fit on Frontiers?
@Rythecarguy
2 жыл бұрын
All second generations
Off Topic - where did you have your tat on your right forearm of the world. I looks cool. Thanks.
@Rythecarguy
2 жыл бұрын
I had it done at a place called "The East" in Orlando FL. Great folks over there. I had it done because I love travel.
Brand name and part number please. Great idea. I hate that prop rod in my way all the time.
@Rythecarguy
Жыл бұрын
Links in description
Where can you buy the whole kit from?
@Rythecarguy
2 жыл бұрын
Links in the description. Comes with everything you need.
Thanks Does it fit for 2008 pathfinder?
@Rythecarguy
2 жыл бұрын
Yup!
@majed9r
2 жыл бұрын
@@Rythecarguy Thanks man Unfortunately it doesn’t ship to my country!
@Rythecarguy
2 жыл бұрын
Oh I'm sorry! If you really wanted it you could ship it to my PO address and I would send it to you. Just have to pay a lot and shipping lol.
@majed9r
2 жыл бұрын
@@Rythecarguy Thanks I really appreciate it I found similar to it which fits for path R51 in Ali-express I have ordered it but needs 40 days to reach from china I will use your wonderful video as a guide Thanks again
Does this work on a 2017 Frontier 4.0 SV 4x4 V6 with a 6spd manual?
@Rythecarguy
3 ай бұрын
It should, yes
@Linuxwarlord
3 ай бұрын
@Rythecarguy Great, thank you!
Will this kit work on my 1996 Nissan Pathfinder SE?
@Rythecarguy
9 ай бұрын
I don't think so. I'm sorry.
@Free-uw4jl
9 ай бұрын
@@Rythecarguy Thank you for replying. As you took your time to answer, I subscribed. 👍🙂
@Rythecarguy
9 ай бұрын
@@Free-uw4jl yay, thanks! 👍🏻
wiper fluid tank is leaking during pouring water to it.. how to fix that
@Rythecarguy
Жыл бұрын
kzread.info/dash/bejne/eYhnj9WinayzZMo.html
Ordering , my rods today. Does anybody have a fix for the lousy seatbealts on a frontier 2006,went to dealer ,they gave me two difference ones to try as extensions neither would work in the receiver, the back seats are impossible . Thank’s for any help.
@Rythecarguy
2 жыл бұрын
What do you mean? how are they lousy?
what are the parts?
Link to kit?
@Rythecarguy
2 жыл бұрын
In the description of the video.
Update after a year? @Ry ??? Does it still work ?
@Rythecarguy
Жыл бұрын
Yea, they are great! Just used them today.
@HazardMEG
Жыл бұрын
@@Rythecarguy nice!!! Will definitely invest in a pair….. SIDE NODE….. I’m looking for something similar for my tailgate on my Navara D40, so that wen I open the tail gate it slowly opens down for itself,, ever came across anything like that?
hi ry i bought the parts without the bracket can you give me the parts number thanks
@Rythecarguy
2 жыл бұрын
Unfortunately there are no part numbers. These are aftermarket part that you can only get in a kit. You can use the link below and reach out to off-road gorilla to see if they will sell you just the brackets?
I always knew there were bots put in place for this!!
@Rythecarguy
2 жыл бұрын
Heck yea.
is this on a pathfinder
@Rythecarguy
2 жыл бұрын
Do you mean will it work on a pathfinder?
@dyip32
2 жыл бұрын
@@Rythecarguy if Kyle doesn't mean that, I do :) Will this same kit fit on a Pathfinder R51 (2005-2012)?
@Rythecarguy
2 жыл бұрын
Lol yes. It will work on a pathfinder.
@Kyle-R
2 жыл бұрын
No I have a r52 but you have to drop close the bonnet
Am I the only one who screwed this up? I started on the right side, took the two nuts off and CRASH my hood fell off the bracket and the whole corner of the hood is dog eared now.😢
their size
@Rythecarguy
2 жыл бұрын
Huh?
@jaffarjaffar8386
2 жыл бұрын
@@Rythecarguy I have a nissan xterra 2008, I would like to know what is the size of the subsidy for the engine cover so that I can convert it
No size of rod and no weight information to lift hood
@Rythecarguy
2 жыл бұрын
That's why I bought the kit. Other people did the measuring work so I don't need to deal with that.
Thanks!
@Rythecarguy
4 ай бұрын
Thank YOU!! 🙏🏻
Thanks!
@Rythecarguy
2 жыл бұрын
YW 🤘🏻
Thanks!
@Rythecarguy
2 жыл бұрын
Thank YOU! I really appreciate this.