I wish the mount was included in the packaging, not everyone has access to a 3d printer 😕

@Jackaroe702

Жыл бұрын

Or at least purchasable

@nostrasimpus8359

Жыл бұрын

I had a company make mine for like $24. Just google 3d printing companies

@ShadowHudson2

Жыл бұрын

They did increase the price from 120 to 150 when they came in stock a couple of weeks ago. I got one (at 150) but unfortunately it still didn't come with a piece.

@scottyknows1566

Жыл бұрын

If interested I'm printing one now, I have black, hmu. Can probably send one for about $15 they take about 12hours but I'm trying to tune it to be faster.

@whodat8048

Жыл бұрын

​@@scottyknows1566 I might take you up on that offer.

What a fun company Hyte is turning out to be. I kinda wish the little 3D printable box would be included though. That seems really practical.

@EmoEmu

Жыл бұрын

Or, you know, even better still: Maybe sell a version where the whole back of the screen is covered up all nicely for people who aren't as crafty.

@G0ldmoon

10 ай бұрын

@@EmoEmu with screws, and bits for me the whole thing is 169, I even have a 3d printer, but I'd pay 200$ for everything included. maybe some microfiber gloves and a roll of suitable tape.

@EmoEmu

10 ай бұрын

@G0ldmoon Exactly. I don't have a 3d printer, and the effort of having to get someone to make the box and then assemble it all would exceed just paying more for a completed product.

@dingapotamuss6213

8 ай бұрын

Amazon UK has the screen with a box provided, not sure if Amazon US has them though

@zoxxxo

7 ай бұрын

@dingapotamuss6213 Amazon US has the same kit with the back mounted box and all the bits. Very easy to install.

Hyte REALLY needs to refine this to be an all-inclusive product. Having a mount included with the control box, SATA (or something else) instead of Molex etc so there's less DIY required and more plug-and-play. I would definitely be a customer of the V2 version with the required adjustments.

@torquesoftware

8 ай бұрын

And now they have the Y70 - which is this!

For the price, this should definitely be more flushed out and not as janky. A simple plastic enclosure going the full length of the screen would be super cheap to outsource. Basically the 3d printed "upper" you already have? Just extend it all the way to the base to include the plastic spacer you had to tape on, and another two holes for the bottom screws, slimline profile down the entire length of the back so the ribbon cable is held inside. Would just like like a smooth black surface from the sides. Hell you could probably run an ARGB stripe down the back that runs off the same control board and power source for bias lighting synced with whatever is on-screen.

@roblox21242

Жыл бұрын

i agree, it looks like a beta product, because consumers needs to find a 3d printer to print the enclosure and also use TAPE to keep things secure lol. more like a homemade kind of product at this stage.

Expecting customers to just have a 3D printer is pretty crazy. Especially for the price.

Love this case. Been thinking about getting the screen.

I love the look of mine; I get a ton of compliments on my LCD screen. I have combined wallpaper engine and AIDA64 for both video and a sensor panel. What a great looking case!

@blakemccorkle18

Жыл бұрын

How do you make it do a transparent background? I had to do a whole bunch of Rainmeter crap to do so

@lobosayshello

Жыл бұрын

+1 for knowing how to do what Hyte has done

This is very cool, but wouldn't it be easier for you guys just to include these 3D Printed mount brackets with the DIY LCD Panel Screen as it would make it more off a convivence to the customers? Personally I don't know that many people that just randomly have a 3D Printer sitting around at home, so it would be quite difficult for me to find a sleek 3d printed mounting bracket solution like this.

I don't understand why you don't include the mount in a kit that costs well over $100

@ericd6791

Жыл бұрын

agreed. not all of us have access to a 3d printer

@itsravt

Жыл бұрын

yes please the complete package

@2321kenb

10 ай бұрын

Or at the very least an extra 10-$20 for mount kit included

@chexmixkitty

10 ай бұрын

@@2321kenb that would be fine. Just include everything in one place.

Most important part was done behind the scenes.. awesome

Super helpful video, thank you.

Thanks for the STL

To everyone complaining about the 3d printing check if your public library has one you can use. Some do apparently

@noshot5793

4 ай бұрын

yeah but for that price, a $0.50 piece of plastic could be included lets be real here

I like the white paint of the insides of this case

This is so freaking cool, i was torn between the NZXT H9 and the Y60 but this has 100% made me choose the Y60

@AndiMon64

Жыл бұрын

Same

@malditoo

Жыл бұрын

Im still stuck rn

@shayde3428

Жыл бұрын

@@malditoo If you’re still stuck, chose y60 of h9 because of the design H9 is way better for airflow tho

Thanks Brad with Hyte! Considering the Y60 now...hmmm

@ericd6791

Жыл бұрын

I bought the case just for this lol....to be honest it is such an easy case to build in. Absolutely worth it.

I have a Corsair RM850x, and I'm trying to use the a 6-Pin to Molex cable included with the PSU. Unfortunately I don't think I'm getting enough power (12V) as the LCD screen isn't turning on. It's detected in windows but the screen is still off. Any suggestions?

when will the hyte software for the lcd display which was in R&D be released? would like to try it

Great project

Does this screen utilize the same nexus software as the Y70 screen?

Can you pls make a vid on GPU brackets to move the gpu away from the glass on 4080 4090 cards pls. I bought the case but the gpu is to close to the glass.

I just purchased one and was wondering. Is there any reason spray painting the back could be bad in anyway?

Any update on when the Nexus software will be available. I am using Aida 64 but I love the idea of running Wallpaper Engine in the background that you cant do in Aida 64.

I own the Ouro Kronii version of the Hyte Y60 case and after watching the video, it seems like the LCD screen mounts with the corner side panel. Is there anyway to purchase a spare corner side panel since in the Ouro Kronii version, the corner side panel has artwork on it.

i hope it will have a v2 with a full back cover

Canadian customers are charged twice the price, not saying it's all Hyte's fault but we have to pay the price and customs to get the product in our hands. At this price it would be nice to have everything included like the 3D printed mount but still a very nice product for all Hyte Y60 owners.

Where can i get a replacement ribbon cable? I am asking for my future self.

Can you see the ibuy power etching in the glass at the bottom after the install???

For $150 bucks that needs to be completely assembled with a back plate.

Anyway I can buy that 3d printed holder from somewhere?

BIG question: can you plug the screen into the USB C port of the graphics card? I have an RTX 2080 and already have 4 screens

is there an adapter hyte recommends to convert from molex to sata? i bought one on amazon but the screen doesn't turn on although i guess it could be defective.

Off topic but I noticed the gpu is almost right against the glass. My y60 is coming 8n this week and I have a, strix 4080 that will be the same. How are thermals?

This case with the lcd mod is the prettiest case I've ever seen. If it could only fit a 4090 it would be perfect

@cybersecuritydeclassified4793

Жыл бұрын

FE 4090 fits good and thermal is good

@DownCasH

Жыл бұрын

my asus tuf 4090 fits with more than enough room to breathe. Hogwarts Legacy on Ultra 120hz@4k, LG C2 oled display w/hdr, gsync. No issues. Best case ever made.

@AubreyOnfroy

Жыл бұрын

@@DownCasH Did you remove the glass panel ?

@DownCasH

Жыл бұрын

@TheXpussyx3 Nope

@mysticqro950

Жыл бұрын

Buy a vertical GPU bracket, that way you can shift the GPU back as much as possible to get better airflow. Best one would probably be a EZDIY-Fab’s magnetic bracket with this case so you don’t have to screw anything in and have it exactly where you want it to be.

Will this work the same way on the hy70 that doesn’t come with a screen? (Buying a hy70 screen separately)

when is the LCD Screen going to be available on your website again?

Are these exclusive? I've been waiting for them to come back to sale on there website for a while

Just got mine last week. I was extra careful. There was nothing at all to mount it so I literally taped it to the glass at the top and bottom. I got everything installed efficiently with the cables mostly out of site. When I turned it on it was immediately apparent that the screen was cracked. Not having a mount made it really difficult to work with. Unfortunately I don’t have a 3d printer. The mount may have saved this screen. Working with Hyte’s support on this. I love the case and am looking forward to getting this installed, in one piece and with a bracket hopefully.

Also where to find the m2.5 screws that would fit for the 3d printed parts?

Are you guys going to give the site the ability to wishlist items so we can see when it comes back in stock?

@TheprodigyTrickShot

Жыл бұрын

They just did

Wont the gaffa tape heat up the circut board? Is there a place that i can buy the cover from? I really dont want to just have it on the bottom of the case wrapped in gaffa tape.

That’s sucks. I have been waiting to doing something like this for my y60. However, item is sold out. Any eta when it’s going to be back in stock:.

I downloaded the Hyte nexus software and cannot figure out how to get any data on my lcd panel like you have here? What am I missing or don't have the option on the software?

HYTE is a good company. Their support is also rock solid.

@dripdripsplash

Жыл бұрын

agreed, had a small scratch on my front panel after peeling off the plastic and they gave me a replacement.

@theblockk

Жыл бұрын

True , best support ever .

You provided a link to the STL file but no link to where I can purchase the kit.

how did you print this? the orientation that it's in? going to print this with ABS.

i love the display i really do but i dont think ive got it set up right. i restart pc and it auto opens up on my main display so everytime i have to drag and drop into extended display. then when i double click or touch it sometimes it opens up and fills screen or doesnt until its in the position it feels it will work. theres also like widgets on my y70 display i cant touch or move or close or add widgets and thats like built into the program software and how it should be, instead of me dropping and dragging the face that works with me touching and moving and stuff. another annoying thing i keep getting is the face with the widgets is also on my desktop main display stuck constantly on the left on my screen. i cant close it or anything. its been updated and everything. any help please or a video on HOW TO SET UP HYTE Y70 DISPLAY. its not just plug and play and download hyte software. theres more to it.

ive got the hyte 70 does this screen fit into the hyte 70?

IMPORTANT: after push the power button the Screen did not show anything, is it meaning this screen can not be used in bootloading stage?

what if we need more slot storage hdd and ssd hyte y60 ?

Would this apply to the Y70 case, too?

Hi, can you reset the skins for this screen?

Where can i find 12v plug in to buy? The cable i got was to short.

I already have dual monitors can I still add this?

How can I get the screen setup that he has in the beginning of the video ?

The fishbowl of my dreams!!

Installed but my GPU has 1 HDMI port and no onboard graphics on 5800X3D no idea how to use this display

So i put a 7 inch mini LCD screen in my pc because i saw it on youtube, looked really cool. but once i got it installed and plugged into the HDMI windows defaults my desktop to the little screen and i cant use my big monitor...cant figure out how to tell windows that my big monitor is my MAIN monitor and the little 7 inch one is #2 it just refuses to work no matter what i try...anyone know what to do here? the only thing ive been able to do is "duplicate screens" which is useless because i need the 7 inch for displaying cpu/gpu temps ect ect. im 6 hrs of effort into it and nothing seems to work

on the website of hyte , nexus software was told to be available on 24th of march, now it doesn't give any date, .....

I have it just like you do but my issue is that the screen against the glass created some air bubbles and they are very noticeable. What would be a solution for that?

@fulyzechan2761

Жыл бұрын

dont quote me on this but maybe some alcohol? Research before trying tho lol

What is a good site to get the stl file 3d printed ?

Did you guys paint the black areas of this case white??

Aonde consigo comprar esta tela ???

When will this be available?

I'm planning to buy the case can you share a very good power supply?

Whats the name of the cord needed its smaller than the average hdmi for the one i have

Will this fit in the y70

So I have the lcd on my Y60 but I the lcd doesn't turn off when i put my pc to sleep or hibernate. It just blinks in solid colors until I turn the pc back on. Anyone know a fix or why this may be happening? Thank you in advance.

where is the original screen sourced from so I can get the same thing for way cheaper? I’m guessing $40 on Alibaba somewhere?

Quando este gabinete chegará aqui no Brasil??????????????????

Can I put this into my Y40 case?

I love that this is available directly from the vendor. I would like to see that molex switched to a SATA power plug instead. Also, could the HDMI cable have a 90 degree end for the GPU instead?

@familiaferreira5530

Жыл бұрын

You have a Amazon link ?

@mysticqro950

Жыл бұрын

@@familiaferreira5530 I sent a link. I don’t know why KZread keeps deleting my comment but the brand is called VSDISPLAY 12.6” 1920x515 LCD display. The reviews should have mostly pictures of people using it with the Hyte y60 case to prove it’s the right one on Amazon.

@DKTD23

Жыл бұрын

@@mysticqro950 The problem is that kit costs even more now than the Hyte one, so the value proposition is going away

@frown

Жыл бұрын

*WAS* available

@mysticqro950

Жыл бұрын

@@DKTD23 well, I didn’t really wanted to wait since it feels like they never restock their own… and I hate having to use the molex, and other unwanted things like the 3d printed thing. I prefer the Amazon one even though it’s more expensive but so far I had no issues.

Is therre an app for systems widgets to display?

Please help. Once I put in the screen. My discord doesn't pop up on my dashboard anymore. It goes straight to my lcd screen panel. Please help me to show up on my dashboard again.

Thing's been out of stock a month now just want to mod my case!

There’s a version with the mounts and all on amazon😊

So when I plug it in, my monitor detects it but it doesnt display anything, anyone know why? everything is up to date too

Only thing I need is the link to purchase one

I have a question. Is Hyte already working on a solution for the big RTX 4000 cards? We need something like an internal bracket so that the card doesn't come too close to the glass.

@Megatherium

Жыл бұрын

Not sure a solution even exists for the y-60. The space just isn't there to exhaust properly, no matter what you add. Options are y-40, a small 4070-ti, open the big panel, or MSI Suprim Liquid 4090.

@AubreyOnfroy

Жыл бұрын

@@Megatherium I saw some wizard managed to horizontally mount the biggest 4090 inside a y60 and it looked fine

@Megatherium

Жыл бұрын

@@AubreyOnfroy ah right I see then.

@Nicsos123

Жыл бұрын

@@Megatherium there are third party solutions, like ezdiy brackets, that seems to work fine and with good temperatures.

@PantsaBear

Жыл бұрын

@@Megatherium Im using a 70mm width 4090 and it runs fine (mostly in the 70s celsius). I removed the bottom pannel which helped a little, but this card runs cooler than my 3080 did which had more room in the case

where did you plug the other side of the power plug cable for that lcd at? i know the front plug goes to the board within the 3d printed set. It wasn't really shown in the video.

@CyberCodeTwins

7 ай бұрын

Okay installed it and connected it with the old school cable they said....molux? Now the lcd screen showing rotation of solid colors? It not showing what the video of the lcd is showing like your desktop? Is there a certain settings to be shown there?

my ribbon broke whats the part to replace it?

what was the app for Widgets ??

where i can buy it, i cant find it online in Germany :(

Link to buy lcd screen ?

I have only one HDMI port that is occupied already. Why not a Display Port?

why your case is white inside? your content is my plan too thanks

Hyte should supply two more 3D files. First, a box if you bottom install it. Instead of covering the installer with tape. And second, a file for a back cover instead of tape covering it like it was suggested. Other than that I will be getting this as soon as available again.

Where the graphics card take the air? The cristal is so close...

Why doesn't anyone show where the display power actually connects to the psu?

My kit didn't come with the little foot for the bottom of the screen. Is there an STL available to print that?

@Milkikomori

3 ай бұрын

Same, and the display is too short without the foot so there’s bare glass at the bottom 🫠

Link of the screens and can install 2 back to back

For the price of the kit the mount for the control board should be included! There are other kit's that do the same thing that include the mount for the control board at a lower price!

Guys, my tower has come back from the paint shop, and the screen is still out of stock. Any news on when we can expect more? This is literally the only piece missing on my build.

@mysticqro950

Жыл бұрын

There are LCD screens that are similar to this one on Amazon. I bought mine from there, it’s called a 12.6 inch LCD screen. The brand is VSDISPLAY. It only uses a micro USB for power, and Mini HDMI to HDMI cable for video signal. People have been using the Amazon ones way before Hyte starting making their own. It works perfectly…

@erufenrito66

Жыл бұрын

@@mysticqro950 ayyy done and purchased. Ty man.

I don't understand, WHY didn't you model 3D model FULL for the ENTIRE LENGTH of the screen? There would be a neat screen body in which a board and a cable would be hidden and all this would look TIDY!

Personally "if possible" I would connect the HDMI to on-board display output supported by the CPU instead of going to the GPU output. I don't know if there is a pro or con but the CPU built in graphics(when available) should be just perfect for something like a display sensor panel.. IMO That's the way I have mine setup..

Any uk suppliers for this kit

Please rotate the Screen Cable input. Having it face out to the left, forces you to bend it so much in order to not see it...

Im from india how can i purchase this case?

CAN YOU RPOVIDE THE STL LINK AGAIN PLS?

for $150 maybe jsut include the shell too? Or atlesst get it back in stock? I’m going to get one from china lol…