How To Install Detroit Speed's 1979-93 Foxbody Mustang Mini-Tubs
Автокөліктер мен көлік құралдары
Watch as we walk you through our Fox Body Mini-Tubs installation on a 1979-93 Mustang. This video will cover installation on Coupe and Hatch vehicles.
The Detroit Speed Mini-Tubs are inner wheel housings designed to accommodate wider tire and wheel packages, including tires as wide as 315mm. They are designed for a perfect fit, retain a stock appearance, and are available exclusively through Detroit Speed Our Mini-Tubs are stamped from 18 gauge steel and made in the USA. The required seat belt relocation bracket and hardware is also included so you may retain your factory rear seats.
Shop Here: www.detroitspeed.com/products...
Пікірлер: 45
Thanks for posting
This looks great, but what about the shock mounts when you're done? I assume there's going to be a rear suspension kit from DSE, but would be nice to have a shock relocation kit for those that go a different route.
@detroitspeed
3 жыл бұрын
We now offer a complimentary suspension kit for our Mini-Tubs. www.detroitspeed.com/1979-93-mustang-rear-suspension-components
@mathewshackelford8037
2 жыл бұрын
The only suspension kit I see arr the upper/lower control arms. Am I missing something?
@mchristr
Жыл бұрын
@@mathewshackelford8037 Detroit Speed does offer a coilover kit that mounts the upper shock in the frame rail and the lower shock on an offset bracket. How about $1500 for brackets/mounts, non-adjustable shocks/springs, and hardware? The price goes up from there.
Great info & tips. It would be great if you did an in depth video on the 1st -2nd Gen Chevy II. In those videos, much of the fab work was glossed over.
Keep them coming, we need some torque arms, and a bolt on minitub shock mounts.
@leemartinez7611
4 жыл бұрын
They’re most likely going to be doing a Quadralink and pan hard bar kit w/o the torque arm.
I didn’t catch all of it but you said the interior trim would fit over the mint tub on a hatch?
Where would you mount the top of the shock if you cut the mounting bracket out?
Are you'll going to do them for the 94-04 mustang as well?
Can these be installed at the factory depth to use as a repair of rusted factory wheel wells?
Will this work on fairmonts/zephyrs since theyre basically the same car, just 5 inches longer?
I have a 1980 Fairmont. Will all the Fox body components work?
Have you'll made for the 94-04' mustang yet???
So what do you do with the top of the shocks
If I was to ship my car to you guys could you install them on my mustang??
You can fit a 315 without minitubs. How wide can you actually go?
What about spring and shock location?????
I called you guys a week or so ago about these fitting on a sn95 mustang and I was wondering if you'll would send me a set because I believe they'll fit..
@detroitspeed
3 жыл бұрын
We have not yet confirmed the fitment in the SN95 platform.
Looks great, but where is the shock mounted?
@detroitspeed
3 жыл бұрын
Our rear suspension it will no longer utilize the factory shock tower. You can learn more here: www.detroitspeed.com/new-1979-93-fox-body-mustang
So you will need to install a IRS in it or wait for them to come out with the coil over bracket kit.
@detroitspeed
3 жыл бұрын
Our rear suspension will be coming soon.
No thanks. I'm not spending an additional 2k for the rear suspension kit just to get shock mounts. I already have the rear suspension components that I want to use.
@xxskizzumxx
2 жыл бұрын
Okay......good for you I guess......
What about shock location
I have a hatch Foxbody. Doing it the same as yours how wide of a tire can I fit. A 305 or maybe 315
@detroitspeed
3 жыл бұрын
If you follow our guidelines on this setup, you can fit up to a 315.
How much to do it on my car?
is it different for fox coupes? how about my torque box reinforced plates hmmm seems very involved...
@detroitspeed
3 жыл бұрын
This kit is the same for all Fox models, but on the coupes, you will need to modify your back seat brace and the decklid hinges.
@robturner7853
2 жыл бұрын
@@detroitspeed kind of obvious some do not watch 100% , Very nice package!!! DS does it again!!
Quick question, what did you do with the seatbelt mounts that are spot welded to the wheel well .
@detroitspeed
3 жыл бұрын
We have a bolt-on seatbelt relocation bracket included with the kit.
@project92fox89
3 жыл бұрын
I see that it came with the lower seat belt relocation mount, I was talking about the upper shoulder belt that has its mount right on top of the wheel well in a hatch. Do you have to convert to strictly lap belt or do we just cut it out and weld it back into place after the tubs are in
@detroitspeed
3 жыл бұрын
Sorry for the confusion. With the upper mount in later cars, you would just need to remove it from the factory tub, modify the flange, and weld to the new tub.
315/60r15?
Where do my coilovers mount? 😎
@blakeholton6274
3 жыл бұрын
looks like its designed to work with their rear Suspension that's coming in fall. kinda stupid to me to sell a product that makes you cut out your shock mounts without having a product ready to replace them i dont care if they are sold separate or in the kit
@Brianaddeo87z28
3 жыл бұрын
@@blakeholton6274 there is like 100 different companies that offer up coil over mounts for a foxbody
Who would want to do this so much could go wrong
@robturner7853
2 жыл бұрын
Everyone that wants a real tire under a Fox!!!
What makes this kit 400$ and others 150? Lol