Thank you for this video. I checked other tutorials on KZread and wasn't impressed. Somehow this step-by-step instruction was clearer than others and helpful. Thanks a lot.

@Housebarons

4 жыл бұрын

Hey Maya, Thanks for taking the time to let’s us know! Glad it worked for you. Thanks for watching.

If you are going ductless don't forget to remove the vent plate on the top of the unit.

Great Job thanks this will help me to DIY and you made it Look Simple and easy to install

@Housebarons

2 жыл бұрын

Hey Helen, Hope it goes well. Thx for watching

Most viewers would want to know how well item functions, noise level, suction, filtering out oder, fumes, grease, under typical cooking conditions.

Great tutorial thanks!

@Housebarons

3 жыл бұрын

Hey Lloyd, Thx much. Hope it helped!

I got EZ brackets with mine...ain't gonna use them. I think that I will take a thin piece of cardboard, make a very accurate template off the topside of the hood to mark out the screw holes , and then position the template where I want it , to allow for a plug in cord in the back...drill four tiny holes and start the screws, then install the cord , and slide it up and in place. My plug in, on the top edge of my stove is about 24 " away...so it should be good. Thanks for your video which showed that you don't have to use the EZ brackets if you don't want to.

@Housebarons

Жыл бұрын

Hey Mark, Sounds like you have a well thought out plan! Go for it! Thx for watching!

Helped 👍

@Housebarons

11 ай бұрын

Hey Chris, Glad it helped!

Hi there, thank you for the video. What is the metal vent flap that came with the unit for? When unpacking you said you probably wouldn’t need it but curious to know what it’s for. Thank you!

Really should put loomex box connectors in to protect the wire coming in to the hood fan . When it comes to exterior venting and Although it's not code in my area and could be different where you are...gas stoves should be vented outside from the range hood upper fan and the suggested CFM fan rating should be your total top burner BTU's and divide by 100. As an example 40,000 BTU total would require a CFM of 400. Those look to be a CFM rating of 300.

@Housebarons

Жыл бұрын

Hey Frank, Thanks for all the detail! And thx for watching!

Great video, thanks. Question: How far in from the cabinet sides should I install the shims? Not clear on the enclosed instructions. Thank you.

@Housebarons

3 жыл бұрын

Hey Marcus..., Those shims just provide a mounting surface - something to screw in to since the cabinet bottom is typically so thin and unsubstantial. They are 1x2 inch pine ( 3/4 thick x 1.5 inch wide is the actual dimension) They go right to each side and are screwed in from the other side of the cabinet bottom. Once the shin attached to the cabinet, you then have a 1.5 inch wide surface to attach the range hood to. Hope that helps! Thanks for watching and asking.

@Marcus7491

3 жыл бұрын

Thanks very much for your help.

Nice tutorial. I have a Broan BCSEK130SS but a similar older Broan in there now. My question is the one that’s there now, it has white to white and black to black. The manual (that didn’t come with the hood) says differently. Can you do a closeup of the electrical for me? Thanks so much!

@Housebarons

2 жыл бұрын

Hey Michael, Sorry. That install was done some time ago. Thx for watching!

Great video, I wish I had seen this before. The handyman cut out the duct plate above. Can this still work for ductless.

@Housebarons

2 жыл бұрын

Hey Ashiesh, Not really sure - duct plate? Thx for watching.

Can this unit be recirculated? If so? What's the specific charcoal filter model number for this?

@Housebarons

3 жыл бұрын

Hey The... Yes. It’s default design is recirculating. Not sure about the filter number. Maybe try the Broan web site / customer service. Thx for watching.

What about the lights in the hood?

Hi looking into getting this one. do you have a video of it one or couid you describe how loud it the fan is? im trying to find a quiet one for twitch streaming.

@Housebarons

2 жыл бұрын

Hey Bilbus, Sorry - don’t have a video of that. I would look at specs and compare db ( decibel ) rating. Only way to compare one with another. Thx for watching!

Nice video. I got one quick question. I want to go with ductless. When you remove the vent plate on the top, won't portion of the vent opening will be blocked by the cabinet?

@Housebarons

Жыл бұрын

Hey Min, It’s been a while since I did that project. Isn’t there a air space between the top of the hood and the bottom of the cabinet. Might be worth a call to the manufacturer. Thx for watching

How long are the mounting screws you used? The ones that with the unit are to short.

@Housebarons

3 жыл бұрын

Hey Miriam, I added additional wood 1x2 supports first to span that gap. See the video 1:40 -1:55 or so. The thickness of that support is 3/4 inch. Then I could use a 3/4 inch or 1 inch mounting screw which would screw into the wood support. Hope that helps. Thanks for watching!

@britbiker9

3 жыл бұрын

@@Housebarons Did you not show how you decided to measure screws placement in wood for mounting? Important info ! Maybe I missed it ?

One year later how is this unit holding up? And what's the pros and cons for ducted and not ducted

@Housebarons

2 жыл бұрын

Hey Micah, No issues. Ducted - vents outside great for smoke/burning food. But more complicated work and possible air leak to outside. Non-ducted - way easier to install. But doesn’t do much but circulate smoke. If you don’t burn food often, non-ducted is easy choice. Burn good- just open a window 😃 Thx for watching!

Didn’t see you install a electrical connector. Should always use a 40/40 or an L16.

Did your unit not come with the EZ1 brackets?

@Housebarons

3 жыл бұрын

Hey Farrell, Great question. Not really sure - it has been some time since I mounted it. I don’t have any memory of skipping any parts or steps. Maybe that’s an update to the product?? Thx for asking and for watching!

What kind of shims did you use? Where can I get them?

@Housebarons

4 жыл бұрын

Hey Amb, I cut those on my table saw. But I know big box hardware stores carry a variety of thicknesses. I’m sure someone there can find you something that you could use. Thx for the question and for watching!

Looking to buy one but am wondering where the air comes out? I don't see a vent in front like most recirculating fans

@Housebarons

3 жыл бұрын

Hey Mr..., Yes. It does recirculate but all under the hood. Thanks for the question

@MrJohnthefarmer

3 жыл бұрын

Went with the Broan CRSH130SS I could vent to outside but has the option to vent out the front and using charcoal filters. Looks great and a very easy re and re.

@brettradecki

3 жыл бұрын

You forgot to take off the recirculating cover on top to send the air out.

Where and how did you get the white cable for the power???

@Housebarons

2 жыл бұрын

Hey Blabla…, That’s just the electric line in wall from the builder . Thx for watching!

my broan hood came with a white, black, green AND RED wire??? what do I do with the red wire?

@Housebarons

2 жыл бұрын

Hey Heather, Red and black might be for separate power for light and fan. I’d call Broan customer service for some guidance. Thx for watching.

I need to get the manual to find out where the fuse is because this will not stop beeping

@Housebarons

3 жыл бұрын

Hey Wrenson, That’s a bit painful! What happened - did you find the problem? Thx for watching,

What other filter do u recommend

@Housebarons

3 жыл бұрын

Hey Bonerjes, We purchased this as Broan is pretty decent name. I would probably check online reviews for different products. Hope that helps. Thanks for watching.

The point at which you show the hole that the wire must pass through to the house wiring, there is a metal plate attached, but the next shot you show the metal plate has disappeared. How did you remove the metal piece in order to pass the wire and connect the wires? Can you fill in the blank, please? Cheers.

@Housebarons

3 жыл бұрын

Hey Fredriko, If I understand correctly, the metal piece to which you are referring is circular, the size of a nickel and it has a slot in the middle? If yes, then you stick a screwdriver into that slot and then bend and twist it and the tabs on the side of the piece will break off and can be discarded. Hope that helps. Thx for watching!

@abedankiest6204

3 жыл бұрын

I noticed you didn’t add a strain relief 1/2-in here. Very important to add since theres metal on metal (minus the wire skins that can wear out over time). Great video!

@joem2197

3 жыл бұрын

@@abedankiest6204 You are correct. Don't want the wires rubbing against steel. Problem waiting to happen if you don't.

If it's not ducted, it's not an install. Pointless.

@Housebarons

3 жыл бұрын

Hey Spruce, It is ducted - vents under floor to outside.

@spruce_goose5169

3 жыл бұрын

@@Housebarons ?? fine work mate, don't mind me, I'm just angry. But that's not vented, unless you're saying you added a vent? Under the floor? Range hoods should be vented if possible. Like I said, I'm just angry. Carry on and stay strong.

@Housebarons

3 жыл бұрын

Hey Spruce, We did added ducting below the floor and then added an exterior wall vent. The exhaust fan is underneath the cooktop. I get what you we thinking - that it was just recirculating. But this one is truly vented. But thx for letting us clarify. If it wasn’t clear to you, there are probably others thinking the same thing. So no worries. Peace, good will toward men! Thanks for watching and commenting.

Hi there, thank you for the video. What is the metal vent flap that came with the unit for? When unpacking you said you probably wouldn’t need it but curious to know what it’s for. Thank you!

@Housebarons

3 ай бұрын

Hey bab…, They typically supply a way to direct the flow of air outside the house if your house has a vent installed to do so. Otherwise, no need to use it and the vent just recirculates the air instead. Thx for watching!