Brothers Dave and Rich, and Dave's son, Caleb, renovate homes along with the help of many family members. Projects are typically on a large scale and most of the work is done without hiring outside contractors.
We post video series that follow a home renovation from start to finish. The first series was called "House Fire Flip" and shows the complete rehab of a home that was severely damaged in a furnace explosion. Currently we are posting "The Golf Course House Flip" series, which shows reno of an upsale house on a private golf course. Our next video series, "The Lake House Flip", shows the remodeling of a 6,000 square foot lake house.
We also post home renovation "how to" videos. We believe that anyone can build wealth by doing projects themselves.
Thanks for viewing! Please subscribe and leave a comment!
For even more home renovation content, visit our website at housebarons.com
Пікірлер
Likes your comment about trying to figure out how to open the box. Finally got my batteries charged and gonna install this afternoon.
Would this work with an individual with dementia, to prevent them from opening the door?
Sorry to hear about your challenge. Hmmm. A couple thoughts : 1) It’s a simple device - so problem solving ability would have to be consistently impaired. 2) how strong are they ? The locks won’t likely be broken by a child, but an adult male probably could - maybe a female / honestly I’ve not tried to break it - just a guess. But it is plastic so it would have its limits. If all that’s needed is act as a quick deterrent, it should work. But if frustration leads one to try and bend and break it, they might succeed. Might be worth a try. Hope that helps.
Thank you!
Thx for watching!
@@Housebarons I did it! Thanks again!
Will it work in collapsing, Sandy soils?
THAT is a great question! I would guess probably not - unless the added water would help it adhere. The pressure washer will dig, but would you 2 foot deep hole be 2ft wide as well? May only know if you try….
No one pre sprays. As a former carpet cleaner.. We ALWAYS pre spray.
Thx for the tip!
Good video, but doesn't it cause a problem to screw through the Kerdi Board?
Hey Mary, In our experience we are not to concerned. The screws are covered by thinset ( holding tile on wall) and while that material is very slightly permeable , any water that seeps through is minuscule. Plus the location only gets splashed water. We aren’t worried.
👍👍👍👍👍👍👍👍
👍back at ya!👍
Thanks for taking your time to help us laymen!
My pleasure! DIY’ers work together! Thx for watching!
4th of July week my ignitor failed on all burners. So I did what this gentlemen is sharing in his video and the closest burner will light first. Turn on the gas for the next burner and it will light in about 5 or so second.
Hope you had a good 4th! Thx for watching!
Thank you sir, did it this morning to two drawers and it worked great. No more drawers opening half way.
Glad it helped! Way to go!
All I had to do was lift up….i sleep now
Always going off at night😃!
Great video thank you. I have a joist needing repair in floor of bedroom over garage. Hopefully I can go under the floor maybe and just rip out the sheetrock in the ceiling in the garage.
The BEST repair is to address the actual sag! Hope it fixes well!
I will try!
Good luck 🍀
@@Housebarons thank you!
Great job 👍👍👍👍👍
Thank you! Cheers!
Great job 👏❤
Thx so much!
How can get one
You can click on the Amazon link in the description below the video - there are a couple options there. You can also find them at your local big box home store.
Thank you! I was so frustrated until I watched your video. Now I understand what I need to do. 🙂
Glad I could help! Thx for watching!
I didn't even need to learn this but SO appreciated how you dumbed it down for people like me to easily understand. More how-to videos should be done like this, thank you.
Hey Climate…, Glad you liked it! Hope your hot water stays hot! But just in case… you saw this😃
Dry mix in a hole never lasts 😂
Over a hundred years ago, pre WW2???? Dafooook how,?
Next is using a Heat Pump Water Heater! After that, Bitcoin mining water heating!
Sounds like some fun!
👍👍👍👍👍👍👍👍
Thank you!
Shim and cover - super creative solution.
Thx for watching Mark!
I will turn my water down. but the other.....i would never keep it all straight.
I'm as bad as Floyd Mayweather at knockouts.
lol!
Great video and very informative. I got two main doors to do at the house. Luv the two puppies. Thanks again.
Our pleasure! Thx for watching and liking the pups!
*"OLDER houses"* 😂😂😂 I'm laughing in my 200 year old house. I wish I was joking. The stuff in my house doesn't exist anymore 😂
Hey Trad…, Wow! 200 yrs - that’s awesome. I feel your pain too!😃
@@Housebarons it's STILL leaking and I've tried 80 things 😂
Very helpful, especially that you showed the materials that you used. I never knew about door and window frame foam being different that regular expanding form, and I was not familiar with MinWax wood filler.
Glad it was helpful! Thx so much for watching!
Great job! It's always fun to beat the man. 😀 You probably already thought of it but a little tape or paper when you were prying on the tabs would have saved the short.
Those sparks really got my attention! Thanks for the tip!
my shower handle is corroded on and won't come off. can I get a trim kit to take off the whole thing?
You can get a trim kit for everything. Maybe you can drill out the set screw on the handle??? Maybe try CLR - line and scale remover… Maybe PBPOWER BLASTER? Hope you find a way!
I lubricated my slides with oil and it solved the problem.
Nice! Thx for watching!
This is like my third time replacing that cartridge. Why do they break so easily.
That seems like a lot? Not really sure/ maybe let the company know??!
no putty or silicone on drain body
Thanks for the great instructions! How often do you replace your string? I needed to do it after about an hour of trimming.
Hey boy that valve should be brazed on there you boys and your cute shark bite fittings get off my job site boy
China junk that wont last. Mine broke twice in less than year then i replaced it with another brand
Great video but using pliers come on. Use your screwdriver multi head works without the bit
They call that hydro-vac it's been used for digging holes near underground utilities for years, it is a great no destructive and fast method!
So this is on the LG website as a work around and it does not fix the issue. Also, any apps that you use will have to be reconnected with pws, and any that are not factory installed disappear and need to be reinstalled
I have the power I’m the 100th like
This is the worst Ac brand you can buy. I bought the 4-5 ton heat pump. Got it shipped to Miami. The unit barely lasted a year. Always breaking down. First the air handler had a major leak then the compressor went out. And good luck getting the parts from the warranty. Terrible Terrible
Find a better sprayer, there was a stream of stain coming out.
I followed all of these steps and thought it was all fixed but now when I flush the toilet, the handle stays lowered and the tank continues to try to fill but cannot because the flush valve remains in the up and open position and continues to empty the water out unless manually lowered. Is there a way to fix this and have the flush handle just automatically lower like normal after switching to a brass arm?
How do you work with that annoying music playing?. I have to mute the video just to watch.
You got lucky that the neither the brick, nor the concrete block hit you. Everything to see wrong on how to handle a machine like this, watch here. Nothing wrong with the machine, just the operator 😂. That is the problem with KZread.
I am 56 years old and trying to do this on my own with no plumber I've gotten all the other stuff to work just fine My sink is from I don't know when long time ago underneath the one that comes out from the trap mine is metal there's no washer or circular thing I don't know the names for all these things two unscrew It's a pipe metal pipe it was two pieces the other piece came off I can't get it to budge
Hey Susie…, Is your issue anything like this video? kzread.info/dash/bejne/gI112caolZi4hMo.htmlsi=EN5R0CLszkX2lpvY
No it's not the only place we have the tiniest of leaks is at the trap I think it's called the one that curves up and it's the one we tighten the white cap that goes into the straight plumbing pace into the wall right there we're getting the slightest bit still coming out so we're going to undo it and maybe it wasn't threaded completely straight I appreciate your help so much I'm not a plumber never done this before and I can understand what you're telling me to do. Thank you@@Housebarons
@@Housebaronsif that doesn't work I will be back next we are going to do the kitchen sink 😮
I can't get the drain stopper pipe underneath the sink off mine is not plastic it's metal any suggestions anyone
Did the samples get stained or swollen? What type of damage did this test incur?
There was zero swelling or staining. We were pretty surprised. This may vary from floor manufacturer to manufacturer but the click lock design was so exact that no water penetrated at all standing on the seam for 24 hrs. You could give this a try with floor innovate looking to install to be sure. Thx for watching!
I noticed that when you were all done with installing the on/off shower plate that you did not caulk around the plate. Is it necessary to caulk around it if it isn't flush to the wall? I had a new shower installed (by a plumber) with new Moen shower head and handle and the plate isn't flush to the wall. I'm afraid water will leak into the wall if it isn't sealed. Thanking you in advance. Sue
It should be flush. Maybe installed wrong. Maybe wall isn’t right. I think caulking the gap at least the top half - from 8 o’clock to 4 o’clock would help. Hope that helps.
Them walls dont look like theyll hold up for long