This is AWESOME! My nailer crapped out on me in the middle of a project yesterday. Now if I only didn't have to wait for parts! Fortunately dad taught me how to drive 8 penny nails with a hammer.

Excellent video pal. It gave me the confidence to try it and so far so good. Thank you.

This is for you mark I super appreciate your instructions on how to rebuild my air nail gun everything that you said on your video you were very clear on how to disassemble and reassemble and I appreciate that very well thank you sure

That was an OUTSTANDING video, well done!

Great video. Have and old DA250A and this video put working just like new again. Thanks this really helped with the repair.

THANKS!!. i just got myEBAY fr350 and was /are expecting a rebuild at some point.This looks simple and i will order my kit from you

Thanks for posting. This video saved me a lot of money and time.

Extremely well made and informative video. Thank you for posting.

Thanks for the video, you're a real good at it, and make it look easy keep up the good work

That was great. Thanks for taking the time to demonstrate!

Very Helpful, thanks for being thorough. I've a Rigid R350CHE needs a rebuild, so hoping it's pretty similar. Just finding a Rebuild Kit has been difficult. I see the parts many places, just not the Kit yet.

THIS HELPED ME TREMENDOUSLY!!! THANK YOU. WHEN I REBUILT MY FR350 TYPE 2 FRAMING NAILER I WATCHED YOUR VIDEO ON DISASSEMBLY. INSTEAD OF WATCHING REASSEMBLY I WENT AHEAD AND DID IT ON MY OWN. WHEN I TRIED THE GUN AIR WAS COMING OUT THE NOSE. TOOK APART WATCHING YOUR VIDEO AGAIN AND THEN REASSEMBLED WATCHING YOUR VIDEO. IT WAS THEN I SAW I HAD PUT ONE PART IN UPSIDE DOWN SO THE THE O RING WAS NOT SEALING THE AIR OFF. AFTER ASSEMBLING I CONNECTED IT TO MY COMPRESSOR AND ALL WAS PERFECT. THANK YOU--THANK YOU--THANK YOU!!!!

Very good video. I have a Central Pneumatic, but I'm hoping they are similar. Thanks!

Thank you for the part and the great service.

This video helps me understand what I need to do to rebuild my air nailer. Thanks

Excellent how-to! About to do this on mine.

That is a great tutorial and will allow me to fix my ailing nail guns. Thanks much

Excellent - Thanks Mark. Keep up the good work.

Great video, thanks for the help!

Brilliant video and very informative!

This is the best video to watch and rebuild your gun.

Excellent video! Maybe one of the best I have seen among millions on KZread. You might have mentioned the various PC models that you sell these kits for, but other than that it was outstanding!

Thank you. I'm about to rebuild my roofing nailer and I have a good idea as to what I need to do

Extremely helpful. Thanks for the video

Hey Mark, Nice video, thank you. I broke my gun accidentally using too high PSI. The piston doesn't retract now and I weighed the cost of authorized repair verses replace. Thanks to your vid it looks like something I will do myself. Not sure what parts I will need but at least I can get the gun apart and back together. Thanks again.

This Video was exactly what I needed Thank You!

Great job. Very clear and understandable!

Excellent video

this video is great i have 2 framing nailers and 3 finish nailers down because air is escaping ant to get them fix here cost me as much to purchase them in the USA thats what i did but now i can buy this kit and fix them, i though it was like brain surgery to fix because of the price . thanks alot

Great Description!

Thankyou for the upload it was very halpful

good job man

Thanks Mark! Great video. M y Porter Cable 16GA finish nailer driver doesn't fire more than one nail, then I have to open the front and push the driver back up and then it will do the same thing. I thought maybe the driver rod was broken or detached, but following your video, I took the top off and the driver was fine. I looked at the spring in the top and the white plastic cup was broken. Can this be purchased for a replacement?

good video !!

This video was well done and helpful but my gun is a little different and I can get the head assembly to come apart. I believe there may be a type A and type B gun and I was wondering if you have a video for my gun which is a FC350A. Thanks

@1raeleen1

9 жыл бұрын

***** is it a round head or clip head nails

grate job tks

very good job --

very good.

where to get a repair kit for bostitch R 12 roofing coil nail 15 years old

why is my framing nailer shooting double nails with every trigger pull?

Is it necessary to perform the entire overhaul if it is only a shattered 910767 collar?

can put one video for the hitachi guns..

I have a Porta Cable FR350A that I need to find the overhaul kit for. Which overhaul kit do I need to purchase. I need to replace the parts in the top for air leak. I've seen numerous kits but not sure of which one I need. Can you help? Thanks.

@johndariano2979

8 жыл бұрын

I have the same question, does anyone have an answer?

I have a BN125A that I just purchased a new head cap for because that was the only way to get the deflector, which is no longer available by itself. My problem is I don't know how to remove the old head valve seal and spring in order to put it on the new cap. Is there a procedure for this or another video? Thanks.

@FIXTechGuides

8 жыл бұрын

Take a look at this link and see if it helps: kzread.info/dash/bejne/fmVoysaNaZSbkaQ.html

Hi I have a 18 gauge porter cable trim nailer, recently when I hook up to my air compresser it shoots out air from the top of the gun... will this kit help with the problem I'm having??

@FIXTechGuides

9 жыл бұрын

The kit is the best way to help with this issue. O-rings tend to harden or break overtime thus they leak.

Hi, I have a 15 gauge porter cable trim nailer , when I use it the driver come down but it want go back up into the gun to shoot another nail. will this kit help with the problem I'm having??DA250A.

@FIXTechGuides

8 жыл бұрын

+Stan Wilson As the seals and o-rings age and wear, the driver will retract less and less. The overhaul kit is part number 90387 and is still available. What I think you really need is the Driver Maint kit part number 903765. This kit is no longer offered by the manufacturer and I'm not seeing any replacement for it. The Driver is obsolete as well but we still have 1 in stock.

i have fr350a where can i get just the collar # 910767 ever place wants to sale the kit bought 1 and the part i need is not there

Just an overall great repair tool, I do nothing without instructions been burned too many times. hahaha

Why no info on the trigger held by pins? You mention it but that's it! FAIL Typical corporate BS.

@johndariano2979

8 жыл бұрын

What choo talkin bout boy? This is great stuff, Willis