super clean hatch, love the theme you got going on with the white and black very subtle. & those wheels look good too!

@MoisesEmpire

3 жыл бұрын

Thanks!! I appreciate it!!

Yo! Just recieved lower lip and installed it on my daughter ride. She happy. Looks real clean! Appreciate advise. Great vids keep it up!! Shout out from Houston!

@MoisesEmpire

3 жыл бұрын

Thats awesome!! Im glad I could help!!

wow thanks for the video. i have to replace my old front lip because i hit s speed bump to fast and ruin the entire front lip. this video helps out a lot. thanks

@MoisesEmpire

3 жыл бұрын

Your welcome! Glad I could help!

Just got mine painted, thanks for showing what Im about to get into! Where did u get the carbon fiber inserts for the wing?

@MoisesEmpire

4 жыл бұрын

No problem man.... The carbon inserts came with the wing. You can find it on their website.

I have some broken slot tabs at the front from my previous front lip. Do you think I'll have a problem getting this to be flush.

@MoisesEmpire

4 жыл бұрын

No there should not be a problem with getting it flush because the lower grill holds most of the lip. It just wont be as strong so hopefully u dont hit anything from the front.

Hey, Im looking at buying this front lip as well. Did you have to do any drilling into the actual front bumper?

@MoisesEmpire

3 жыл бұрын

Nope. Watch the video so you know what to expect when installing it. Its pretty simple.

Hey quick question, I just installed the same lip as yours. However, when I tried to use the orignal self taping screw to put back the bottom of the lip, none of them fit together. The only two thing that's holding the bottom of the lip on mine is the 10mm bolt on each side and the hex screw on each side as well. It seem to hold decently but just want to see how u installed on yours.

@MoisesEmpire

4 жыл бұрын

I was able to install those 4 screws same as u but I was also able to put in I think was 3 or 4 of those original plastic clips in the middle basically under the lower grill. The 2 by the wheel I could not put them back on because they ended up not being long enough anymore.

@wilsonzhang4952

4 жыл бұрын

@@MoisesEmpire ok let try again the middle area to see if I fit those plastic tap then. One more question, on the side of the winglet, did you drill a hole to the car to secure the lip? Right now if I use some force I can feel the winglet move up and down.

@MoisesEmpire

4 жыл бұрын

I thought about it but I did not. I left that alone just because I didn't want the be able to see the screw there on the end. So far I have not had any issues.

do you scrape more easily now that youre few inches lowered at the front? are you on lowering springs?

@MoisesEmpire

4 жыл бұрын

Ive been lowered on coilovers for almost a year now so Im used to having to watch out for bumps on the road and steep driveways so I dont scrape. But lip itself is only about an inch lower then the original one was so its not much different in the front compared to the stock lip.

random question but worth a shot do you still have the OEM front lip?? mine just got destroyed by a random object in the road and i cant find anywhere near me. or online.

@MoisesEmpire

2 жыл бұрын

No I don't have it anymore. The OEM one is hard to find and its expensive. I would look at aftermarket ones If i were u.

Did you put all the push clips back on the bumper? Because I installed mine and I got 6 push clips left that came from the original bumper. 😅

@MoisesEmpire

3 жыл бұрын

Lol no. I think it was 2 or 3 that i couldnt put back on on the bottom side.

I have the same front grill on my civic, and ended up gluing the oem emblem on since the emblem doesn’t fit on that grill. How did you end up going about mounting the emblem since there isn’t much of a back plate?

@MoisesEmpire

4 жыл бұрын

My grill came with a back plate and emblem already on it so I did not have to use the OEM one.

@jordanle8691

3 жыл бұрын

@@MoisesEmpire Where did you buy the front grill?

@MoisesEmpire

3 жыл бұрын

@@jordanle8691 ebay.

@jordanle8691

3 жыл бұрын

@@MoisesEmpire i’ve heard a lot of other people had fitment issues with ebay front grills, how’s the fitment for your grill?

@MoisesEmpire

3 жыл бұрын

@@jordanle8691 yeah ive heard that to but mine fit perfectly like oem.

Does the grill and under cover comes with the lip when u buy it?

@MoisesEmpire

4 жыл бұрын

Yes, all 3 parts and screws are included and a roll of red pinstripe.

Do you have a link to the lower grille replacement you used?

@MoisesEmpire

4 жыл бұрын

It comes with the lip. You Cant buy the grill alone.

My old OEM lip got damage on a ditch To change the OEM Lip for a New one Do i need to take the bumper off or can I do it by only just lifting the car? and unclip it from under

@MoisesEmpire

4 жыл бұрын

You can probably do it by just lifting the car up but it will be a little difficult to get to all the clips. Also if you need to replace the lower grill then yes you have to take off the bumper so you can get to the screws that hold it.

@israel6642

4 жыл бұрын

@@MoisesEmpire just replace the OEM lip. Is the oem grill attach to the front lip?

@MoisesEmpire

4 жыл бұрын

@@israel6642 no I dont think it is. Its only attached to the bumper.

@israel6642

4 жыл бұрын

@@MoisesEmpire thank you

Hey how do you remove the side skirts of the hatchback sport model ?

@MoisesEmpire

3 жыл бұрын

Im not 100% sure because I've never taken them off. I think there's a few screws and push clips u gotta remove from under the car.

Do you think it’s gonna fit on my hatch ex 2019 sir?where did you bought it and how much?thank you in advance ✌️

@MoisesEmpire

4 жыл бұрын

Yes. It fits all 10th gen hatchbacks except the typeR. U can get it at absdynamics.com I bought it for $130

@pinoylifeinusa498

4 жыл бұрын

How about the diffuser?

@MoisesEmpire

4 жыл бұрын

@@pinoylifeinusa498 the rear diffuser I got at my local Honda dealer. Its the 2020 diffuser.

@pinoylifeinusa498

4 жыл бұрын

Thanks bro I’m trying to do this one at a time so I guess I’m gonna try the cheapest first.you don’t how a video on your side skirt bro?

@MoisesEmpire

4 жыл бұрын

@@pinoylifeinusa498 your welcome! My side skirts are OEM from factory. I have the sport hatchback.

approximately how long did it take you to do the install from start to finish?

@MoisesEmpire

4 жыл бұрын

Idk exactly but id say about 2 hours. But that was while filming for this video. If I wasn't filming I'd say around and hour to an hour and a half.

Can you send me the link for this front lip? Thanks!

@MoisesEmpire

4 жыл бұрын

Idk which civic u have so here's a link that shows for all civics. Si, coupe, and hatchback. absdynamics.com/collections/honda-1

super clean civic bro one cuestion! you type r wing where did you buy it???

@MoisesEmpire

3 жыл бұрын

Thanks man!! Its from absdynamics.com

@rnfabricacion9606

3 жыл бұрын

@@MoisesEmpire thanks bro

I’m having trouble with the under tray and where it goes exactly? How does it fit on there?

@MoisesEmpire

2 жыл бұрын

Mine only fit one way. Parts if it go under the lip.

@haydenberg6700

2 жыл бұрын

@@MoisesEmpire do you by chance have a picture of how it fits on there

@MoisesEmpire

2 жыл бұрын

@@haydenberg6700 I can take one but youtube dont let you post pics in the comments. Umm I guess add me on Instagram. @moises_fk7 and send me a message.

@haydenberg6700

2 жыл бұрын

@@MoisesEmpire will do!

Can this fit on a 2k17 civic hatch ex-t??

@MoisesEmpire

3 жыл бұрын

Yes. Fits all 10th gen hatchbacks.

Broh where you get your part? You got any link for them

@MoisesEmpire

4 жыл бұрын

Absdynamics.com Just look for civic front lip.

Did it comes painted with gloss black when you bought it or you painted it?

@MoisesEmpire

4 жыл бұрын

I had to send it to get painted. It comes in a flat black plastic.

@xtianoliver1057

4 жыл бұрын

Just pre ordered mine and went with the carbon. It’s my first time modding, so I don’t know how’s the installation gonna be like. 😬

Can I install the abs front lip right the original lip? Or do I have to take the old lip off?

@MoisesEmpire

2 жыл бұрын

Guess u didn't watch the whole video lol. U have to take the old lip and lower grill off.

@JayZ04000718

2 жыл бұрын

@@MoisesEmpire lol thanks man

Where did you bought the rear spoiler from?

@MoisesEmpire

3 жыл бұрын

I got it from absdynamics.com

My friend are you using the Original OEM lips. If not can you sell it to me.

@MoisesEmpire

2 жыл бұрын

No sorry but I've already sold it.

looking for the exact kit bro if you have the exact link let me know. You only got the website listed.

@MoisesEmpire

Жыл бұрын

Sorry but You'll have to look through their website. Last I heard this one was discontinued and now there's a new style.

@simplistic_nick468

Жыл бұрын

@@MoisesEmpire this is what a lot of us need with the broken stock lip on the 21 hb sport

Can you add a splitter strut rod?

@MoisesEmpire

3 жыл бұрын

Yeah you can. I plan to add one eventually. I want a carbon fiber one.

Where did you buy the type r front lip? And grill?

@MoisesEmpire

3 жыл бұрын

Company name of the lip is in the title and I say it in the video lol. Grill is from ebay.

@justmick1020

3 жыл бұрын

@@MoisesEmpire thank you lol.

What’s the link for this lip ?! Thanks :)

@MoisesEmpire

3 жыл бұрын

Absdynamics.com

Hello bro, where did you bought you front lip

@MoisesEmpire

Жыл бұрын

Absdynamics.com

Can you send me the link of this kit that you bought pls

@MoisesEmpire

3 жыл бұрын

Absdynamics.com

@Boostedcivics

3 жыл бұрын

Thanks man appreciate

@MoisesEmpire

3 жыл бұрын

@@Boostedcivics no problem bro.

I noticed you removed the OEM stock front lip. Are you selling it ? Lol. I asked coz I have an EX which is a plastic vinyl and wanted to attache what the sport or sport touring has :D

@MoisesEmpire

4 жыл бұрын

I might sell it since I no longer have any use for it. But it's a big part so shipping might be expensive.

@SuperMoonem

4 жыл бұрын

@@MoisesEmpire let me know how much with it cost including shipping. I live in West Covina, CA

@MoisesEmpire

4 жыл бұрын

@@SuperMoonem ok message me on my Instagram if you can. Its Moises_fk7

Where can I get all of this?? I need to buy all of this

@MoisesEmpire

2 жыл бұрын

Lol all of what?? The lip is from absdynamics.com

Do you need to drill into the bumper

@MoisesEmpire

3 жыл бұрын

Sorry I did this a long time ago so don't really remember, but I don't think so. I suggest you watch the whole video to find out if I drilled or not.

are you selling the oem front lip?

@MoisesEmpire

4 жыл бұрын

I already sold it.

Did you have the Lip come painted?

@MoisesEmpire

3 жыл бұрын

No. I took it to a body shop to get painted.

How much did it cost to paint?

@MoisesEmpire

3 жыл бұрын

$130

How much did it cost to get it painted gloss black ?

@MoisesEmpire

4 жыл бұрын

$130

@FernandoSanchez-ti7zc

4 жыл бұрын

Clicked on link. Shows the the front lower lip to be sold out. Do you know anywhere else to purchase one? Your civic looks badass.

@MoisesEmpire

4 жыл бұрын

@@FernandoSanchez-ti7zc thanks!! u could try their ebay store. But if they out of stock on their website then its probably the same on ebay. You'll probably just have to wait for them to be back in stock because I dont think anyone else sells them.

@FernandoSanchez-ti7zc

4 жыл бұрын

Thanks man. I appreciate your response. I will try it.

@xtianoliver1057

3 жыл бұрын

Fernando Sanchez they only pre order it now i think. But there’s one at bayson r but they are little bit pricey compared to absdynamic. baysonr.com/products/17-20-honda-civic-2dr-si-4dr-si-5dr-type-r-style-front-lip-w-lower-grill-pp?_pos=2&_sid=298390e37&_ss=r

Where can I find a lip like that bro?

@MoisesEmpire

3 жыл бұрын

I got mine from absdynamics.com

@jtoyz6050

3 жыл бұрын

You have discount code for your subscriber?

@MoisesEmpire

3 жыл бұрын

@@jtoyz6050 I wish I did but no sorry. I dont have enough subscribers for that yet.

do they have this for the si?

@MoisesEmpire

4 жыл бұрын

Ive been told that the Si front bumper is the same as the hatchback so it should Fit.

@Twopointslow

4 жыл бұрын

Moises Empire oh great. So where can I buy it from?

@MoisesEmpire

4 жыл бұрын

@@Twopointslow I got mine on eBay but I think they out of stock right now so I would try their actual website which is Absdynamics.com

@Twopointslow

4 жыл бұрын

@@MoisesEmpire ok thank you

Can you provide link?

@MoisesEmpire

4 жыл бұрын

absdynamics.com/collections/honda-1

@tommydukes1979

4 жыл бұрын

On ebay for $150

Are you from canada or the us?

@MoisesEmpire

4 жыл бұрын

Im in the US

@gelodelima9921

4 жыл бұрын

I see, I am planning to get this product for my hatch as well but getting it from the ABS site is a pain.. your car looks great tho!

@diegoeleazar9154

4 жыл бұрын

@@gelodelima9921 Get it! Its worth it. I paid $360 CAD thats including shipping.

I think your video is very informative but I’m getting dizzy with how much the camera moves.

@MoisesEmpire

Жыл бұрын

Yeah I noticed that problem. My newer videos are much better tho cuz I bought a new camera that has a gymbal feature built in so the videos are much smoother.

I have a ex 2021

Howmuch?

@MoisesEmpire

2 жыл бұрын

How much for what?

@edmondcheung6180

2 жыл бұрын

@@MoisesEmpire for front Lip .

@MoisesEmpire

2 жыл бұрын

@@edmondcheung6180 think its was like $130. Link to the website is in the video description of you wanna go check. Price might have changed from when I bought it.

@edmondcheung6180

2 жыл бұрын

@@MoisesEmpire thx

Findangling 😂😂😂😂

@MoisesEmpire

2 жыл бұрын

🤣🤣shhhhh

ABS no longer stocks this part unpainted. Only carbon fiber. Sucks because I'm not interested in the carbon fiber look..

@MoisesEmpire

3 жыл бұрын

Dam that sucks. U could always just wrap it that way it holds its value of being carbon fiber.

@MoisesEmpire

3 жыл бұрын

Never mind I just looked it up and saw that its fake carbon like the OEM typeR lip and its $100 more then it used to be.

@ealonwallace2553

3 жыл бұрын

@@MoisesEmpire Thanks for the feedback man. I like the look of this part so much, I just might have to.