10th Gen. Honda Accord - How-To: Front Lip Spoiler Install
How to install a front lip spoiler on a 10th gen. Honda Accord (2018, 2019, 2020 Honda Accord 2.0). A relatively easy and effective cosmetic mod on our 2019 Honda Accord 2.0 Touring project car - we install the HiRev Sports V3 front lip spoiler! Follow these simple install tips, helpful for any Honda Accord aftermarket front lip spoiler mod. I've provided links below to the tools and supplies you may need to effectively install any spoiler for your next modification. Watch this video to find out how to mod your 10th gen Honda Accord yourself (caution: only if you feel capable).
Amazon Affiliate Links:
3M Double-Sided Tape - amzn.to/2ZnzFCv
Auto Ramps - amzn.to/2UGrInX
Wheel Chocks - amzn.to/3aujFRC
Auto Floor Jack - amzn.to/2xzkyKo
Jack Stands - amzn.to/2vW9MgJ
Power Drill - amzn.to/3cQn1Qg
Stubby Phillips Screwdriver - amzn.to/2XiuNvt
DISCLOSURE: This video and description contains affiliate links, which means that if you click on one of the product links and purchase an item from Amazon (and/or others), I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
DISCLAIMER: Due to factors beyond the control of The Lemon Factor! (Chad), I cannot guarantee against improper use or unauthorized modifications of this information. The Lemon Factor! (Chad) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Lemon Factor! (Chad) recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Lemon Factor! (Chad), no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Lemon Factor! (Chad).
Пікірлер: 179
That hole at the end, that has a bigger hole than the screw provided is actually for the factory clip. Theoretically, that hole should line up with the factory hole of the skid plate and bumper, and you can use the factory clip to secure all. That is why you are also short on screws.
I'm glad you said the reason that you went with the self tap screws and double sided tape. I didn't think of this and now I agree with you. I was gonna use nuts and bolts or rivnuts. But imma do it your way, which is the way the companies say too
@TheLemonFactor
3 жыл бұрын
👍
Your review is second to none. Every step is expanded.
@TheLemonFactor
2 жыл бұрын
Thank you! Appreciate you sharing the positive feedback 👍. Glad you liked it 😁
Your reviews and guides are superb, watched several know and find each to be very useful and well presented. Thank you for sharing with us sir!
@TheLemonFactor
3 жыл бұрын
Thank you for the watch, support and positive comments, they are very much appreciated 😁
I just installed mine, thanks for your guidance, you saved me hundreds from having someone else install it. Although, even after careful placement and propping up the front lip to help meet height, I still wan't able to get it flush on both sides, it still looks great though.
@TheLemonFactor
3 жыл бұрын
I’m glad the video helped! 👍. Which front lip spoiler did you get?
@XxLIVExX24
3 жыл бұрын
The same one you got, carbon fiber print. I am guessing I didn’t dry fit it enough. I was having such a hard time doing the dry fit, I found it was just easier to just apply the tape for dry fitting. While doing so, I noticed the lip needed to be stretched out on both sides for both sides to properly be flush. But it was bard for it to hold in place that way so I just like it compress a little and that is why one of my sides is like 1/2 in h from flush. Still unnoticeable Looking at it 6 ft away.
I just picked up a lip from ebay and the install went really smooth and looks good seems to be holding up fine
@TheLemonFactor
3 жыл бұрын
That’s great 👍. Which front lip spoiler did you get? I wish mine was holding up well 😕
@100rats2
3 жыл бұрын
@@TheLemonFactor mine was for a miata but it was one from stay tuned performance on ebay
@TheLemonFactor
3 жыл бұрын
👍
Awesome video! this will be my guide to installing my front splitter on my 2024 CRV EX👍
@TheLemonFactor
11 ай бұрын
I’m glad to hear that you found the video helpful 😁. Good luck with your install 👍
I been contemplating on getting this style spoiler from hi rev as well. Thank you for this. Great video and well detailed
@TheLemonFactor
3 жыл бұрын
Thank you, Nolan for the positive comment 👍. Unfortunately after having this spoiler for a year now, it hasn’t worn well and I’ve been forced to replace it 😟. I have a video that will be released this weekend covering the topic 😁
Thank you for uploading this , I got mine on properly and everything thanks to you🙏🏾🙏🏾
@TheLemonFactor
4 жыл бұрын
That's awesome! Thanks for sharing.
bought same style, looked so good! drove it on the highway and fell off... need to use bolt, washer and nuts next time
@TheLemonFactor
3 жыл бұрын
Sorry to hear that 😟. Yes, with a front lip spoiler, considering the weight is hanging from the front bumper and the pressure it’s under from air flow while driving, mechanical attachments such as screws/bolts are necessary.
@SynthAlan
3 жыл бұрын
what you use at first, glue?
@ohhchuta
3 жыл бұрын
Doozy crappy screws it came with lmao
wish honda had an oem lip. I would buy it.
Fantastic video. Thank you for sharing about the finish and that it only attaches w 3m on side
@TheLemonFactor
3 жыл бұрын
Thank you for the watch and positive comment 👍😁
My 2018 Accord 1.5T just had a fuel injector fail at 58k error code P0172 (posted on my channel). Modern Honda look amazing but once the 3yr/36k warranty expires you're on your own and you have no idea how expensive modern Honda engines are to fix. Oil changed at 80%, Shell regular used 80% of the time, always did warm up the car in the winter. Dealer so out of touch they recommended brake fluid replacement at 30k. I've never seen this part fail in ANY of my past cars. When asked why the injector failed so early Dealer said they see them all the time and cost of replacement is $1600-$2500 (must replace all 4) and the new injectors warranty is only for 12k/12mos! I was in love and bought the 1st Accord on the lot with series ending in -0001 but when I made a case with Honda to see if it could be part of a bad batch all I got was crickets from Cust service and VM of the case manager for weeks on end. I fell for all the influencers stating the Accord was the best in it's class.
Lol I’ve gotten all my car parts for my accord on ebay
@axware7553
3 жыл бұрын
Same eBay and Amazon and it works the best
@JJ.ANDERSEN.201
3 жыл бұрын
Chad was under the impression that HiRev will be of much higher quality. Unless it’s an expensive part from Japan or Euro, most of these parts are sourced from a few same suppliers from China. I do buy parts from eBay. I figured, they’re so inexpensive, I can just throw them away if I dont like it. Most recently, I purchased a $42 roof spoiler made of PU. Not knowing it’s a flimsy material, I decided not to use it and get another one made from ABS material. I dont want to return the PU, because return shipping was going to be $22..lmao Chad - thanks for warning us about what not to do, especially the pushpins.
Nice ride Western Massachusetts here 10th gens
@TheLemonFactor
2 жыл бұрын
😉
I actually ordered a roof spoiler from HiRev a few days ago. Hoping the quality is a little better than what you received on your lip spoiler.
@TheLemonFactor
4 жыл бұрын
Please let me know what you think of it once you receive it.
@ScagsWH13
4 жыл бұрын
@@TheLemonFactor Certainly!
@ScagsWH13
4 жыл бұрын
@@TheLemonFactor I received my roof spoiler today and there are swirl marks all over the spoiler and it looks like it was painted over. There is also no 3m double sided tape on it like the website says. I'm hoping to hear a reply from HiRev soon to see if I can get another or if it's a last cause and I won't be doing business with them again.
@MrStingraybernard
3 жыл бұрын
@@ScagsWH13 now I know I won’t order from them
@clintonking1841
3 жыл бұрын
I also ordered the back window roof spoiler and it had a giant defect right in the middle. I ended up sanding it down and bondo’ing it the sanded and wrapped it. Talk about a pain in the butt.
Now, once it’s on the car, vinyl wrap it in gloss black and you can hide those molding imperfections and it will just look like on continuous mold
I am about to do a spoiler install. My question is how has your double-sided tape held up?. I believe your video is like a year old. Majority of my driving is highway. Thx
@TheLemonFactor
2 жыл бұрын
No problems whatsoever. Follow the install as identified and you shouldn’t have any problems 👍
Gosh I really like the design of this lip I wonder if there is a higher quality version of it for a little bit more money I would be willing to buy
@TheLemonFactor
4 жыл бұрын
My thoughts exactly. Maybe some others will comment with their experience.
I think the Yofer front lip is better and looks great I have it not yet installed
Not.sure if this was mentioned in comments. But if you use the ramps and install the lip, you may kit be able.to bring.the car.down without scraping the lip on the ramps.
Bought a Akasaka front lip spoiler with the side lips in pearl paint with gloss black center Came with 3M Used screws on side in center used 3 machine screws hoping it won’t wipe out bumper which is a strong possibility like you mentioned a valid point will work with your style and screws mine is heavier which was concerning Fit and finish is perfect love it
@TheLemonFactor
3 жыл бұрын
I'm not too happy with my lip, I might end up swapping it out for the Akasaka. Where did you buy yours?
@gosborne3248
3 жыл бұрын
You can get them on eBay They can cost $150 to $175 but honestly the side lips come pearl paint and the center is gorgeous If you want to see some pics on my 2020 Hybrid of it installed which was not hard you can find me under Glenn Osborne 61 on Instagram Thankyou It’s well worth the money for the Akasaka and there is a American company that ships straight from Walnut California instead of waiting longer for it to arrive from China
@gosborne3248
3 жыл бұрын
Amisatse is the manufacturer in California I paid $159 which was a good price it’s a beautiful lip as you can see on my Instagram and you get it within a week coming from Cali
@TheLemonFactor
3 жыл бұрын
Thank you for the information 👍
@TheLemonFactor
3 жыл бұрын
That’s good to know. I’ll look into them. From the pics it does look better than the one I have now.
Maybe that larger hole on the corner is designed to receive the stock push tab
@TheLemonFactor
4 жыл бұрын
I did consider that, except that the area around the hole protrudes outward slightly, instead of being flush.
@2kv8
3 жыл бұрын
I had some spare push tabs and trimmed an edge flat so it would go in straight. It worked great and helped located to spoiler.
Been trying to find this front lip for my 10th gen honda civic hatchback.... the one found says sedan only....
So I purchased front lip on eBay and put it last night.... it came off the first night😣 smh I used the 3m molding tape and self drilling screw but never bolt it on.
@TheLemonFactor
3 жыл бұрын
That stinks... I’m surprised it came off, and so quickly! What are you going to do?
I want to put a lip on mine but my wife sometime drives it and she can’t drive low cars and she will Destroy the fuck out of it 🤣🤣
This might be the only video I've seen of the HRS V3 lip I'm thinking about replacing my eBay one I got two years ago with this one it looks nicer
@TheLemonFactor
4 жыл бұрын
It does look pretty good from afar, just don't get too close to see the "faults". What's the quality like on your eBay front lip spoiler?
Hey Chad, I love this mod it looks amazing. I am wondering if you would do this if you lived in a snowy area? Do you lose alot of clearance?
@TheLemonFactor
3 жыл бұрын
We get plenty of snow here in New England. With the car lowered an inch I do end up scraping the bottom of the spoiler on inclines. I also need to be careful not to run into parking curbs. It is a challenge trying to keep it from getting damaged. With that said, it’s been a year and it hasn’t worn well. I’m releasing a video this weekend in which I’m replacing it with something much cheaper and more durable 👍
@referenceplz5547
3 жыл бұрын
@@TheLemonFactor Thank you sir for the quick reply and great video content
You got a bad one or they fixed it. Mine seems to not have the physical deficiencies. May still be lacking screws though lol.
@TheLemonFactor
2 жыл бұрын
I’m glad you got a good one. Good luck with the install 👍
This is nice but Isn’t this bumper lip too low ?
@TheLemonFactor
Жыл бұрын
Depends on the roads you’re driving on, and if you’re lowered 🤔🤷♂️
Was planning to o order one myself,after watching this videos not so sure but for the price maybe I'll try it.... after finding those defects couldnt you contact support for a refund or exchange? thanks great video
@TheLemonFactor
4 жыл бұрын
Yes, but I would have had to ship it back at my expense and pay a restocking fee. I didn’t feel like it was worth the hassle.
Excellent video! Thank you! Did you happen to have the link to the exact ramps you have? The link in the description brings up all of the ramps on Amazon supposedly compatible w the Accord.
@TheLemonFactor
4 жыл бұрын
My ramps were given to me as a gift, thus the more general link I provided. The Rhino ramps look to be a good choice and based on the specs are almost the same size.
@smokesgtp
4 жыл бұрын
@@TheLemonFactor thanks!
great video....very detailed
@TheLemonFactor
4 жыл бұрын
Glad it was helpful! Thank you for the positive comment.
Hey bro.. good afternoon I just came across your video and was looking up hi rev sports front lip on eBay and couldn’t find it.. where exactly did you go to? Thanks
@TheLemonFactor
3 жыл бұрын
They sell direct via their website - hirevsports(dot)com.
Thank you for your video
@TheLemonFactor
4 жыл бұрын
Thanks for the watch and comment
is a drill mandatory for the screws?
Did you to do any drilling under your bumper to screw the splitters in?
@TheLemonFactor
3 жыл бұрын
I don’t think I had to drill. I believe the screws easily screwed in. However, there’s nothing wrong with making some small pilot holes to get you started.
@andre6746
3 жыл бұрын
@@TheLemonFactor Noted. I have a 2017 Sport SE. Planning to get a 2021 2.0t this year and your videos' will help a lot for mods ideas and tips! thanks!
@TheLemonFactor
3 жыл бұрын
It’s a great car. Good luck with the purchase 👍
hey chad, where did you get the Glossy Black Sport Style Front Grille? thanks in advance
@TheLemonFactor
3 жыл бұрын
This is the OEM Honda accessory. I believe I bought it from College Hills Honda- a link can be found in the description below. However, there are other cheaper alternatives out there, including overlays and wrapping the pieces in vinyl.
so the push tab already in the bumper would not be removed to reinsert through the large hole in the spoiler and bumper combined to hold the spoiler and bumper?
@TheLemonFactor
4 жыл бұрын
I did not. However, I did not discover that until it was a little too late. I would at least try to see if it fits securely.
Hey I have a question. Whats the difference between flex fuel kit and methol kit? Also which is better to get if u had a choice.
Good for 150 mph
where can we get that blue ground tarp??
@TheLemonFactor
Жыл бұрын
Actually, it's a furniture moving blanket... works great and protects your parts during installs too. You can find them here...amzn.to/3JYgQwF
Woukd this fit on a 2021 accord? Can’t find really anything that’s for 2021. Only up until 2019
@TheLemonFactor
3 жыл бұрын
I don’t believe it would as the 2021 has a different front bumper 🤷♂️
Quick question, did you have to drill into the car at all with the screws or are the screws just to hold the actual lip together?
@TheLemonFactor
3 жыл бұрын
Yes, you must screw the lip spoiler to the car at several different spots.
For that price, it looks fine !!
@TheLemonFactor
2 жыл бұрын
Agreed.
So how did drill the holes on the bumper with out letting the car ? I'm tryna instal one similar like this and I don't have a jack stands
@TheLemonFactor
3 жыл бұрын
You don't have to drill. The plastic is thin enough that you're able to screw them in by hand.
@MikeyLee559
3 жыл бұрын
@@TheLemonFactor Interesting 🤔 thanks
Hey I have a question, how do I installed the front license plate? I live in Florida and my car doesn’t come with it set.
@TheLemonFactor
3 жыл бұрын
There should be some notches / indents in the front bumper for where you’re supposed to screw the license plate frame into. Make sure it’s level and you use stainless steel screws, washers.
Awesome
Hey I want to get the yofer lip for the accord how easy was the install because I don’t have a drill of my own or do u not need one for the install
@TheLemonFactor
3 жыл бұрын
You can probably install it without.
Will this possibly lower the value of the car when i'm ready to sell? I want to only make reversible mods that don't affect resale value. Thanks!
@TheLemonFactor
4 жыл бұрын
I wouldn't expect it to add value to your car unless you find that certain individual. Regardless, it's easily removable.
What front lip spoiler do you have, or are you considering, would recommend?
@smokesgtp
4 жыл бұрын
This exact one actually. I have the similar appearance mods as yourself on my black Touring.
@xgnofearzthe10thgenlegend82
4 жыл бұрын
S fabricator. I had this and that flare on the ends of the lips Really bothered me after a while( like in my picture). It’s pricier but it’s cleaner look for me. However being that it is of exceptional quality. It’s heavier. But it does come with everything this needs to be install. Nuts and bolts. One solid piece. I’ve had installed for 3 months and I drive like a mad man. 🤘
@Chinese080808
4 жыл бұрын
@@xgnofearzthe10thgenlegend82 is the company called S fabricator?
@TheLemonFactor
4 жыл бұрын
What do you think of yours?
@xgnofearzthe10thgenlegend82
4 жыл бұрын
@Chinese080808 S_factor_fabrication on Instagram
Please size of those screws
Where is the link to buy the lip spoiler?
Can we install the front lip using the 3MM double sided tape, Will it be safe to do it?
@TheLemonFactor
4 жыл бұрын
I would not recommend installing the front lip using just the double sided tape.
do you have the link for the front lip?
@TheLemonFactor
3 жыл бұрын
The link is provided in the description below the video 👍
Is your grill black too? What product did you use?
@TheLemonFactor
3 жыл бұрын
Yes, it’s the Honda OEM black chrome grill. 👍
Hi! Can you send me a link where you buyed please 🙏?
@TheLemonFactor
3 жыл бұрын
Sure... it’s hirevsports.com
just wondering if u have modified suspension on your car or if they’re stock
@TheLemonFactor
4 жыл бұрын
The suspension is still stock (for now ; )
@danielhernandez-cr3qm
4 жыл бұрын
The Lemon Factor! sick. I was just wondering because for some odd reason my dad doesn’t want me to change the suspension so I have to keep it stock and I didnt know if the lip would look good on stock suspension, but yours looks great!
Good video, sorry you got a crappy product. Can you do one on how to remove and paint the chrome upper part by the Honda emblem on the bumper? I see yours is already black but mine is chrome and it’s bugging me.
@TheLemonFactor
4 жыл бұрын
That was one of the first things I did when getting the car, change to the Honda OEM black chrome trim (unfortunately, I did not do a video on the install). If I were to do it again, I wouldn't have paid for a new piece, but rather applied a matching black vinyl as a "chrome delete". There are a handful of companies out there that offer the vinyl kit to make this change.
@clintonking1841
4 жыл бұрын
The Lemon Factor! Thanks for the tip. I’ll definitely look into it.
@brianrodseth9200
3 жыл бұрын
@@TheLemonFactor Plasti Dip is always a option as well. Blacked out all my rear emblems and mirror assembly that way. I used vinyl for blacking out all the Chrome trim on the upper doors front to rear.
@TheLemonFactor
3 жыл бұрын
I like the non-permanence of the vinyl. Admittedly, I’ve never used plasti-dip, maybe I should give it a try 🤷♂️
Hello, does It fit to 8th Honda accord?
@TheLemonFactor
2 жыл бұрын
I sincerely doubt it... but you can check on their website to see what they may have for the 8th gen Honda Accord.
hey ur in mass anyway i can get in contact with u so u can help me install for me if possible im in ri
What a piece of crap! I would have just returned it!!! Love your videos!
@TheLemonFactor
4 жыл бұрын
I foresee at some point looking into something different.
Would you recommend this front spoiler 🤔🤔
@TheLemonFactor
2 жыл бұрын
There are better ones out there, but you’ll pay more for them. For the money, it’s eh 🤷♂️
@kevindinh5382
2 жыл бұрын
@@TheLemonFactor 🤔I’m looking at it and it’s currently $110, would a eBay piece be better or is this better🤔, how did it hold up ??
@TheLemonFactor
2 жыл бұрын
Not well. It started peeling after about a year. 😕
Even super expensive high end full body kits have imperfections. I have never seen one that didn't need some kind of body work. Its because of the molds they use and the mass amounts they make, they just don't care. But its ok in my opinion. If you really want a Sema show car, then put some work into the pieces and they will be perfect. But for your everyday driver, who cares
@TheLemonFactor
3 жыл бұрын
There’s better made pieces out there that we shouldn’t have to settle for poor quality.
Does this scrape on stock suspension?
@TheLemonFactor
2 жыл бұрын
I don’t think it would be too low, but it’s all going to depend on your inclines. 🤷♂️
@muhammadharis-bc8wn
2 жыл бұрын
@@TheLemonFactor oh okay thanks man
Just a suggestion, you dont need random pictures or clips that cut in between your video. Everyone knows what a bumper is. Overall, good video. ✌🏽
@TheLemonFactor
4 жыл бұрын
Thanks for the watch and feedback.
Would you say this is worth it?
@TheLemonFactor
4 жыл бұрын
It's still on the car, so I guess it's not bad enough compared to the price paid. And that's really the only reason why I'd let the flaws go... it was cheap at ~$70.
@bj10jgo
4 жыл бұрын
@@TheLemonFactor Thanks im thinking about just getting the Sfactor fabrication kit since its more durable. The last thing i need is the thing flying off on the freeway..lol
I was hoping it would fit mu2021 Honda Accord sport....it doesn't,,😭
@timwarren9383
2 жыл бұрын
My 2021
@TheLemonFactor
2 жыл бұрын
I’m not surprised as it has a slightly different front bumper. Did you find another option?
@timwarren9383
2 жыл бұрын
@@TheLemonFactor I think I have..But now I'm nervous it to will be not right... I'd love to walk in a place that had these things near by.. Maybe I will call and confirm it goes with the 2021 Sport.... BTW...Love this damn car,,👍😁
@TheLemonFactor
2 жыл бұрын
It’s an easy car to love 😁. Hope the spoiler works for you. 👍
What’s the IG for this car?
@TheLemonFactor
4 жыл бұрын
There's isn't one (at least not at this time). Maybe I should?
Wouldn’t recommend any eBay front lip for this car. They’re all trash
Looks like a cop car
@TheLemonFactor
2 жыл бұрын
A good looking cop car 😎
Chinese lip. That’s why all the irregularities
@TheLemonFactor
4 жыл бұрын
It's cheap in quality and cost. I'm sure at some point, I'm going to "upgrade" it.
That was a lot of talking.
Ebay sucks
Quite disappointed. 15 minutes talking about installing and a hundred plus references to missing screws. Then cut to spoiler already installed. Not a single pic or second of video showing the ACTUAL install? Can you update video to show us the install? Please.
@TheLemonFactor
3 жыл бұрын
Or......"Hey Chad, next time can you please show more details (video and pics) of you actually attaching the pieces together and then to the car as it's a little hard for me to follow. I'm a very visual person and it would help out a lot. Thanks!" Chad - "Thanks for the constructive feedback. Yes, I will be more conscious of that for future videos!"
Don't understand why people like to buy ebay crap and junk stuff for their car if you love your car order the real deal from Japan
@DanielSanchez94_
4 жыл бұрын
Links?
@teamhonzilla
4 жыл бұрын
daniel sanchez no link yet still searching I’ll put it up soon I find a company in Japan
Awesome 📹
@TheLemonFactor
2 жыл бұрын
Thank you 😉👍
Glad I didn’t go with HiRev 🥱😅
@TheLemonFactor
3 жыл бұрын
It’s not holding up well either 😕
@CheezusRy
3 жыл бұрын
@@TheLemonFactor Is it bad enough that you’d consider replacing it?
@TheLemonFactor
3 жыл бұрын
Yes 😕