Excellent Video. I appreciate your attention to detail. Very informative and great workmanship. I needed the idea of putting the windlass under the anchor locker door. This idea will help me tremendously. Again, Thank you for the great idea!
@alanbutterworth421916 сағат бұрын
Brilliant video. Really helpful, many thanks.
@brucemcnair28 жыл бұрын
Great explanation. Takes a little fear out of drilling into my boat. Cheers
@jaymorgan80173 жыл бұрын
Very nice. I need to do this in various ways on my small fleet.
@mynamewastaken068 жыл бұрын
really good explanation. I don't use the cloth style glass, but that's just my preference. cheers!
@TexansForChrist5 жыл бұрын
Great helpful video! Thanks.
@phygital17 жыл бұрын
Really great video!!!
@christianstolz27146 жыл бұрын
Great! Can you help me. What anchor role you used?
@the4hunters Жыл бұрын
Wow great video subscribed
@giorgiopellegrini6050 Жыл бұрын
Great video. 👍
@jamesbaxter28127 жыл бұрын
Have you through about having solar to charge your battiers
@peternycpeterw74845 жыл бұрын
Great step by step
@eagle57209 ай бұрын
Can I install this on my 23 foot chris craft boat and it does have a below deck anchor locker at the bow.
@SailingSarah5 ай бұрын
Well I just bought an old school manual winless that I'm going to have to bolt to the deck it's going to add about 85 lb to the weight up there, oh well. That fancy stuff is for Rich folks anyway.
@darrelltv89648 жыл бұрын
good look man
@crazypict3 жыл бұрын
Is it some special properties that the windlass shall have when it is installed like this, when it is mounted below and hidden under the hatch?
@crazypict
3 жыл бұрын
Forgot to say - great video!
@kevinturner8343 Жыл бұрын
Thanks for the video 👍 (Pedantry alert: It’s a vertical windlass you fitted, not a horizontal)
@martinparker9249
Жыл бұрын
i was just going to comment that too !
@fischb228 жыл бұрын
does this windlass have a free spool? or do you have to hold the button down the whole time?
@JamestownTV
8 жыл бұрын
you have to hold the button down the whole time.
@hangemhigh20008 жыл бұрын
Looks good man, you must have learned that from copying my style. Cept I only use Epoxy. You can use Epoxy over Polyester but you can't use polyester over epoxy. Especially when the polyester boat had many years to cure. That cloth to, I have that, and in 45 ounce, from Germany sewn for use in propeller windmill blades. I even have 50 some yards of left over Kevlar from the Lockheed Martian aerospace division in California they sell me at a fraction of what you pay wholesale. Don't worry, I won't ever tell my haters, they're to smart for me. Carry on.
@keithharrison36362 жыл бұрын
The V700 is a vertical windlass.
@artsirx2 ай бұрын
can i hire you to do the same to my boat?
@jripn85432 жыл бұрын
Is that chad reed ?
@evanherpin69805 жыл бұрын
This was SO helpful. Thank you very much!
@TexansForChrist5 жыл бұрын
Great helpful video! Thanks.
@ganderson588 жыл бұрын
What is the length and width of the G10 plate. I am trying see if i have room in my boat which has a similar configuration.
Пікірлер: 28
Excellent Video. I appreciate your attention to detail. Very informative and great workmanship. I needed the idea of putting the windlass under the anchor locker door. This idea will help me tremendously. Again, Thank you for the great idea!
Brilliant video. Really helpful, many thanks.
Great explanation. Takes a little fear out of drilling into my boat. Cheers
Very nice. I need to do this in various ways on my small fleet.
really good explanation. I don't use the cloth style glass, but that's just my preference. cheers!
Great helpful video! Thanks.
Really great video!!!
Great! Can you help me. What anchor role you used?
Wow great video subscribed
Great video. 👍
Have you through about having solar to charge your battiers
Great step by step
Can I install this on my 23 foot chris craft boat and it does have a below deck anchor locker at the bow.
Well I just bought an old school manual winless that I'm going to have to bolt to the deck it's going to add about 85 lb to the weight up there, oh well. That fancy stuff is for Rich folks anyway.
good look man
Is it some special properties that the windlass shall have when it is installed like this, when it is mounted below and hidden under the hatch?
@crazypict
3 жыл бұрын
Forgot to say - great video!
Thanks for the video 👍 (Pedantry alert: It’s a vertical windlass you fitted, not a horizontal)
@martinparker9249
Жыл бұрын
i was just going to comment that too !
does this windlass have a free spool? or do you have to hold the button down the whole time?
@JamestownTV
8 жыл бұрын
you have to hold the button down the whole time.
Looks good man, you must have learned that from copying my style. Cept I only use Epoxy. You can use Epoxy over Polyester but you can't use polyester over epoxy. Especially when the polyester boat had many years to cure. That cloth to, I have that, and in 45 ounce, from Germany sewn for use in propeller windmill blades. I even have 50 some yards of left over Kevlar from the Lockheed Martian aerospace division in California they sell me at a fraction of what you pay wholesale. Don't worry, I won't ever tell my haters, they're to smart for me. Carry on.
The V700 is a vertical windlass.
can i hire you to do the same to my boat?
Is that chad reed ?
This was SO helpful. Thank you very much!
Great helpful video! Thanks.
What is the length and width of the G10 plate. I am trying see if i have room in my boat which has a similar configuration.