Very helpful. Thank you for this clear explanation of how to properly use a windlass

@LongshoreBoatsCharleston

2 жыл бұрын

Marc, we're glad you enjoyed the video!

Great video! Thank you for posting this.

@LongshoreBoatsCharleston

2 жыл бұрын

We're glad you enjoyed it!

Thank you Tim very useful information

Very helpful and clear presentation. Thank you.

@LongshoreBoatsCharleston

2 жыл бұрын

Glad you enjoyed it and it helped!

Many hours in a boat and still learned something. Good stuff

@LongshoreBoatsCharleston

2 жыл бұрын

Glad you enjoyed the video, John!

Another great video awesome instruction

@LongshoreBoatsCharleston

3 жыл бұрын

Thanks, William! We're trying to put out as much informational content as we can lately!

Very helpful. Thank you sir!!!

@LongshoreBoatsCharleston

3 жыл бұрын

We're glad you enjoyed our video, Randall!

Great demonstration

@LongshoreBoatsCharleston

2 жыл бұрын

we're glad you liked it!

Great info captain

@LongshoreBoatsCharleston

3 жыл бұрын

Thanks for the comment! Glad you enjoyed it!

I bought an old sailboat, I basically go over every system it had in three months… I had check the windlass, it moved up and down a few inches. I says “it is ok!”. I leave the marina the first day on the boat and I anchor in a bay that night … the anchor goes down. The next morning I hit the switch to bring the anchor up … the slack comes up then the windlass stops. (@&£#~~^€€) so I pull the anchor up by hand about 30 feet and tie the chain around a cleat. Later the next evening I release the chain and let it go to the bottom again. I checked the connection (it was old) so I redid that and that was it for that night. The next morning I decided to look at it again, I hit the button and it starts to bring the anchor up … then jams. I look under the windlass and the chain piling up and not dropping down to the rest of the chain. So I moved that little bit of chain and started the motor again, it picks up some chain and jams. It did pick up all the chain with my help but at least I didn’t have to pull the anchor up. Everything was good.

thanka alot for this video ... iam from kuwait and happy to watch you :)

@LongshoreBoatsCharleston

3 жыл бұрын

Glad you enjoyed it!

My old stomping ground, was a Submariner down there in the 80s

Nice job time, I was looking for one for my boat.

@LongshoreBoatsCharleston

2 жыл бұрын

Definitely comes in handy!

nice job tank you

@LongshoreBoatsCharleston

2 жыл бұрын

Glad you enjoyed it, Jeff!

Thank you interesting

@LongshoreBoatsCharleston

Жыл бұрын

Glad you enjoyed it!

I’m not putting my hands anywhere near the windlass when it’s operating. I’m also not going to operate it from the bow in rough seas.

you were going to show how and why to use the Lewmar wrench.

Excellent explanation. Was just curious, will the little brass nub and button reset automatically…..? And what is the tool for ( to crank manually possibly ?) Thank you so much.

@LongshoreBoatsCharleston

2 жыл бұрын

Thanks Christopher! No, it needs to be reset manually. The tool is to tighten up the gypsy and to reset the brass detente button. We appreciate the questions!

Thanks for the video! How do you gauge how many feet of rope you are letting out to make sure that you are within the proper ratio?

@LongshoreBoatsCharleston

2 жыл бұрын

Lots of people mark their rope with permanent marker or spray paint in ten foot increments, which will get you close!

I guess for what I do the old fashioned way is best

Very informative, as I’m the new owner of a 2006 pre-owned boat with a windlass. One question. You refer to the thing that secures the anchor in the up position as a “painter”(?)? Currently my boat has a black rubber tie down which is ugly and hard to attach/detach. I’d like to replace it with something cleaner and easier to secure like the system shown in this video. My Google search returns nothing close when I search “windlass anchor painter”. Am I hearing or spelling it wrong?

@LongshoreBoatsCharleston

2 жыл бұрын

The windlass "painter" is a Lewmar Anchor Safety Strap. The part number is #SS180001. We carry them in stock at our store! Hope this helps!

Whats the lumar ? tool for and whats the purpose of the water valve inside the hatch over the anchor line ?

@LongshoreBoatsCharleston

3 жыл бұрын

Lewmar is the make of the Anchor Windlass. The freshwater spigot is to connect a hose in order to rinse the anchor, chain & line as it comes in as needed.

Tim you forgot to show how to use the wrench

Where did you get the receiver for the tool?

@LongshoreBoatsCharleston

3 жыл бұрын

It comes standard on the 2020 EdgeWater 320CC that is seen in the video! If you call our parts department at 843-216-4710, we may be able to order one for you.

You are very handsome and my mom like you!