My apologies guys, I meant to say we tested the capacitor and it was GOOD. It tested fine with my multimeter on microfarad setting. Sorry for any confusion :) cheers

@OcRefrig

Жыл бұрын

Yea. I was about to say. Most times a hum like that is a bad cap. Easy way to tell if its a bad cap usually is spin the blower wheel with your hand and hit the switch to make it hum like u did before if it takes off running it’s usually a bad cap.

@mikeglasgow9618

Жыл бұрын

You did the right thing..... I've never replaced a blower motor without a new capacitor.

@jessezuniga1280

Жыл бұрын

Hi HVAC guy, What does a company charge for this? Thanks

@eegg6954

Жыл бұрын

@@jessezuniga1280 $1800 - $2500 on Long Island

Single-handedly, you are making HVAC available for those who can follow simple steps and learn. Bravo!

@diyhvacguy

Жыл бұрын

Thank you :) I do my best

@scott5654

Жыл бұрын

Or burn your house down trying 👍🏻👍🏻

@ironnerd8336

Жыл бұрын

@@scott5654 He showed every step needed. Why the hell does every HVAC service tech think that people are incapable of following wiring diagrams, simple instructions, and sound advice? Thumbs up, thumbs up, hashtag I'm an expert.

@justinberry3991

13 күн бұрын

Personally, these days, I wouldn't trust a certified hvac technician to put air in a bicycle tire. Maybe just my area and there are some that actually do a good job (or what they show themselves doing on KZread) but the cons outweigh the pros. Actually goes with every certified businesses these days. If it ain't theirs, fuck it. Don't know if it's lazy, job security or not giving a shit but.... No. I guess in bigger cities where there's code to have this done they might do a better job but here with no codes they are crap

I came in here to endow you with my TREMENDOUS gratitude for sharing your talents with the interwebs. I, nearly 60 year-old/about to be homeless lady) just fixed the central air system in the house I'm staying in, and may have earned myself a few more months of shelter by doing so. Yes I'm sobbing with gratitude for the help this and other videos provided. You can't even know. ❤ ❤ ❤

@kennethwood2089

6 ай бұрын

Peace and blessings, Lala! You are the one in a million! Good fortune will smile upon you!

After watching your videos I feel confident in replacing parts on my furnace. No one makes videos like you do. Thanks!!

It was a super handy video. Thanks to you, your encouraging words of "these things are all pretty much the same design", I pulled out my blower motor assembly out of an Aire-Flo furnace and cleaned the crap out it, and recorded the existing motors specs just in case. Thanks for the help.

This is exactly what i have to do, thx so much 👍🏼. I changed my filter but going to start using pleated ones.

Very nice video . I've commented before. I'll have something to say here. Years and years ago, when I worked residential. Anyone with a service agreement got visited twice a year. Once in the spring and once in the fall. Our service manager would tell us if we needed to pull the blower assy. That was part of the service agreement. Every blower got pulled out and cleaned and motor lubricated once per year. While the blower assembly was out we always changed the filter and thoroughly vacuumed and cleaned the entire blower compartment. . A service agreement was 159.00 back then for 2 visits per year. Times were good back then. Retired now.

@michaelking42

Ай бұрын

Thanks for throwing this out there, it is good information for me.

Good video. Just had the AC guy tell me the blower motor was out and had to wait until Monday to get it replaced. I watched this video, found the motor and put it in. Only got hung up for a bit on the wiring because it was different than what I originally had. My old motor handled the cap connection a little differently. But we are up and running. Family is happy and the temps in the house are dropping. Phoenix 110+ today.

this vid takes the mystery out and replaces it with confidence to tackle this project. BTW, in addition to rinsing the fin wheel, I would have vacuumed the housing and motherboard, etc.

Excellent...I learn a lot from your top quality videos!

Nice work . I wish I could see those wires like I could when I was 50.

I've done this twice on my 1970s-era blower. Both times it was the front bearing worn egg-shaped from the weight of the squirrel cage. My blower seems to have more substantial sheetmetal in its construction and, therefore, more weight out on the end of the shaft. The first time I wasn't able to locate a motor but had a new motor with the same sized end bells, so I just swapped them onto the old motor. The second time I ended up with a 4 speed universal motor.

@mikeluckham5518

Жыл бұрын

In my case I was able to find new bearings... brass sleeves in a body of plastic material

Nice video David, keep up the good work!

@diyhvacguy

Жыл бұрын

Thanks ☺️🤗 love you pops

I'm getting lots of tips from you, thank you very much. once my furnace breaks down, I might fix it More videos, please..

@diyhvacguy

Жыл бұрын

I’ll keep ‘em coming! If you are interested in support with your HVAC system from sizing equipment to repairs, and warranty info, make sure and check out our membership over at Patreon.com/diyhvacguy Cheers

All right little mister electrician, I know how good you work but everybody else needs to too. Keep posting these great videos. Have a wonderful night.

@eegg6954

Жыл бұрын

A good mechanic never fears competition.

Great video. Very informative and easy to follow.

I just replaced a genteq 2.3 1hp motor with an evergreen vs 1hp motor and control board. It was about $450 for the motor and $150 for the control board. Versus $800+ for the official replacement motor. And $1,400+ was the total estimate including labor. So I saved $800 buying the evergreen and i still have a pretty high tec efficient motor. And i didn't have to mess with a capacitor and wiring was fairly easy

Good video.! Sometimes the motor is hard to get off, if so a little oil and light sand paper on the shaft should help.

Another Great job 👏👏👏

Great video, thank you for sharing. God bless!

Thanks for sharing, Dave

Great video with excellent step by step instructions!!!

Good video. Very helpful.

Very educational video, thank you

Good video , thanks for sharing , God bless !

Great video. Thanks

awesome video! But I have a question... I have 2 units in my house, one for the 75% of the house and the secondary one just for the bedrooms. I am thinking about replacing the motor on the secondary one to make it more quiet in the bedrooms at night. does this make sense? would it hurt anything? i am ok with not using 100% of its capacity as a result. I already have the motor out. 1/2hp 1050rpm R047 S. Any help is appreciated!

Great video thank you

Nice work

I had an X-13 (mounted vertically) go wacky last weekend. It would NOT shut off, even with the COM & all 24v signal wires removed. I'm guessing its orientation causes condensation to well on the module. I ended up installing a DPDT relay for the L1 & L2, and it is activated by the Green fan wire. I can hear the relay kick on now and then the fan starts. I suppose I should leave a note as to why! You know, just in case you work on it in the future. LOL

electrostatic dust bunnies on the control board may short board components if humidity is an issue in Salt Lake city. I thinking compressed air or perhaps 99.9% alcohol cleaning of board prior to reinstallation may be a good idea.

I know this sounds crazy, but I recommend having an extra capacitor AND motor in your workshop ready to go in case these go bad. They ALWAYS go bad when it's crappy weather. And they always seem to go out after work hours!

@kennethwood2089

6 ай бұрын

Yessir The capacitor and blower always seems to go "stinko" when it's a -20*F blizzard outside at 3:00 a.m.

Do you have a video on how to clean the blower motor fan? I've been searching and can't seem to find one. Thank you!

Good job! So simple! You're right....keep your filter changed. Keeps the dirt and fuzz out of the unit.

Hi, love your video's and subscribed. Hope you can help with my older Carrier furnace will run its heat cycle and when the blower fan stops, the blower will start up again for a few seconds and then stop again until heat is needed again. Was told it might be the fan limit switch.

@diyhvacguy

Жыл бұрын

Yes, clogged filter, blocked vents or returns, clogged blower wheel, maybe a capacitor. Does it have any codes? For full tech support check out our subscription on Patreon.com/diyhvacguy where for $25/mo you’ll have full access to tech support and help with all things hvac related. Hope you can get it sorted out. Dave

U can Write “ Blower side “ or Better yet. Take a standard screwdriver & scratch an “ X “ into the steel. Toooo many times I’ve marked on something to wash it off While cleaning with degreasers etc. Scratch it with a screwdriver , knife whatever your most comfortable with.

@diyhvacguy

Жыл бұрын

Brilliant! Thanks so much!

Thank you for the useful, informative videos. Are the Wago Lever Nuts heat rated to use inside the furnace or only for the blower housing?

@diyhvacguy

Жыл бұрын

Yes they can be used in the burner side no problem. Obviously you don’t want anything that close to the flame but in that area where all the factory wiring is, is totally fine 👍🏼

Question. Why didn't you thoroughly clean that circuit board when you had it detached? Compressed air usually does the trick.

@diyhvacguy

Жыл бұрын

This was a rental property and they kind of do the minimum. I could let the blower wheel slide though. It was super nasty.

@DavZell

Жыл бұрын

@@diyhvacguy *couldn't

@Garth2011

Жыл бұрын

@@diyhvacguy Shouldn't matter if they are on time with their rent etc.

@markbarnard3340

Жыл бұрын

Yea, you could have taken that circuit board outside and gave it a good hosing with the garden hose! Service is dead

@petersack5074

Жыл бұрын

@@diyhvacguy ...rental property. Yup, same as up here in Alberta. The ' owners ' just dont actually GIVE A DAMM. Eavestrough falling off, for 3 or more years; sheds full of mattresses/boxsprings/frames. Washer/dryers/stoves, etc in yard, under trees. NO ONE CARES, anymore = GREEDY FOR PROFIT. No surprise, to me at all, that the furnace is a dirty disgrace....

Saw the title and was hoping this would be converting an ECM blower motor to a universal motor with a capacitor. Would love to see a video on that. Had a Goldman ECM motor die last year and was told the motor was backordered for several months. So it had to be converted.

@theelmokiller

8 ай бұрын

What did you end up doing? ECM motor died in my oil furnace and I'd love to be able to swap it.

@hkgonra

8 ай бұрын

Converted it to a standard fan with a capacitor.

@theelmokiller

8 ай бұрын

@@hkgonra Did you do the conversion yourself?

@hkgonra

8 ай бұрын

I did not, I called in a much more experienced HVAC guy. He was actually an electrical engineer in Ukraine but came here and got into HVAC. Nice guy to have on speed dial. LOL @@theelmokiller

You are awesome !

Thanks. my 1992 Rheem central air is still running due to yearly oiling and one recent disassembly and scrub brush cleaning . An old HVAC repair man once told me to buy the cheap filters because they put less strain on the motor when pulling air.

@diyhvacguy

Жыл бұрын

I agree 100% with that

@mikeglasgow9618

Жыл бұрын

I've always used standard pleated filters. The blue fiberglass filters that you can read a newspaper through are no more than BUG CATCHERS. LOL

@Franklinveterinarycenter1of4

11 ай бұрын

double stack the mesh style and never use the pleated filters.

@y2kam550

2 ай бұрын

You can get better airflow by using the thinner cheaper filters The strain on the motor from trying to pull air through a denser filter isn’t something that happens with squirrel cage blowers (or any centrifugal fan) since they’ll just keep spinning existing air around inside the blower housing.

This is all well and good as long as you're existing system is pretty old. Most of the newer ones have motors with a buncha computer shit on em. The blower motor for my A/C went out last summer and the hvac company wanted $1200 just to replace the motor. I found one at Graingers and replaced it myself in about 15 minutes. Still cost almost $400 just for the motor. Unfortunately the "universal " motors won't work in most of the newer systems.

@diyhvacguy

Жыл бұрын

exactly why I prefer the less sophisticated furnaces. Of course if it’s under warranty it’s free :)

@scott5654

Жыл бұрын

Well, 15 minutes is a gross exaggeration. I mean, I’ve only changed four or 5000 of those blower motors, and I am not as good as you having only done the one that you own. It takes more than 15 minutes just remove the blower assembly and reinstall it.

I noticed that you tap the capacitor contacts in order to discharge voltage and to prevent potential shock and should have said so.

How about the rotation of the motor in conjunction with the blower wheel.

Can you explain which speed is for which half of the system and does it matter? Thanks for the video.

@scott5654

Жыл бұрын

Depends on resistance to airflow. Too little and the heater will overheat . . . and so on

I would bypass everything and test the motor directly. Those motors do not die usually with so many things in the path to the motor to go bad.

Thank you

I have been watching your video’s, and have a question. On my motorhome I installed a soft start on each a/c unit. Works great I can run one on 30 amps now. My question is can I install one on my house a/c? Would it allow it to start easier? Or would it not pay?

@diyhvacguy

Жыл бұрын

I’ll do some research on this. I believe they are coming out with a wired soft start for residential ac so I’m curious to see how that works! Stay tuned! Cheers

What size are the 3 screws that attach the belly band mount to the side of the blower cage

hey man my Blower is making a lot of noise when AC is turned on. would replacing to this blower motor helps?

what information do i need to buy a blower motor replacement for air handler? Do I just need HP, RMP and Voltage?

A dirty filter doesn't fill your unit with dirt like that. They were either running this without a filter or using one of those garbage cheap nylon filters that doesn't keep any dust out. What a dirty filter will do is over stress your blower motor and burn it out early.

Friend is going through this right now. Cap tested OK. New one didn't work. I thought it was the relay on the circuit board.....

Hey I just changed out my motor and I don’t have a connection for the white cord on my motor. What should I do?

Hey, shoulda vacuumed up, BEFORE dis-mantling the unit . Cleanliness, makes for better health; both for you, and THE MOVING PARTS in that furnace, like motor bearings. ( Probably seized up, with dust/crud; same as indoor mobile fans. I find alot of them, in dumpsters; clean the bearings, and AWAY WE GO. Got many of them). Thanks, for the education. !

Many of the cheaper motors or "universal" types are built with bushings vs. true ball bearings on their main shafts. The number one reason most motors stop working is due to failed bearings/bushings and a ball bearing style typically is higher quality and will last longer than a bushing design. This would have much to do with what type of job is intended, long lasting quality or Chinese. Same goes with a capacitor...USA or Chinese, one lasts longer. Great video on the process with one exception. Would have been a good idea to clean off the main board and interior of the air handler of all that built up dirt and dust. That amount of filth would indicate NO filter was used for a long time.

@Garth2011

Жыл бұрын

@@Kevin-mp5of Generally that is untrue however, there are millions of imported products that are just as good as USA or better but most of the time they aren't going to include electric motors or other mechanical devices. I have seen lots of hand tools from imports that are dandy and other things. Not to mention "made in USA" has been pimped out to include imported parts and imported assembly can bear the name if it meets a certain percentage of parts and assembly here in the USA so just because it says USA doesn't mean it really is a USA quality product. Brand loyalty is a thing of the past and it appear the brands are responsible for that some.

@freespirit1975

Жыл бұрын

I had a Heil Furnace/AC that once it was about 10 years old I could hear from the attic a barely audible bearing whine when the fan was on. I had pretty good hearing despite loud stereo music and concerts in my youth. I found that the USA made motor actually had oiling ports, so then and every few years after that when I heard it again, I would pull the motor/fan out and oil it with a few drops of Zoom brand oil from an HVAC supplies shop. I understand now they are made sealed and you can't lubricate them. I would also visually inspect the heat exchanger for rust and cracks and clean out an dust and lint inside the unit. The only thing I couldn't get to, to clean, was the A style evaporator coil which I was just sure was coated with crud. Even though I knew my furnace was probably good for another 20 years, the system wasn't cooling well and I let them talk me into a new Lennox a couple of years ago, saying my condenser fan was bad-drawing too many amps(all it needed was a new cap I now know) and my compressor was testing weak -drawing too many amps-maybe true, maybe not. They also claimed the parts were obsolete now. I actually believed all that, because the condenser unit was the second one for that system-first one, the compressor conked out. Also the system was 25 yrs old, and R22 is sky high expensive. They left me overnight with a temp "replacement motor". When they took it all out the next day, the evaporator was very clean. I don't know why it wasn't cooling well but I have the feeling I got "took." Now this new Lennox sweats a lot and collects water in the pan, and now I see that HFC 410A is now being banned anyway! Great. I'll say one thing, after I have educated myself with all of these YT videos, the next time they better be pretty damn good to fool me, if that's what they are doing.

@Garth2011

Жыл бұрын

@@freespirit1975 Always be aware of confident artists and those who only know the classroom facts. The experienced tech who is there to represent you first is the one to hire.

@Garth2011

Жыл бұрын

@@freespirit1975 You did good in that case. Family shops tend to be better however, not less money.

@MAGAMAN

11 ай бұрын

@@Garth2011 "there are millions of imported products that are just as good as USA or better" No, there are not. The only times they are better than American made are when there is no similar product made in america. Slave labour and 12 year old chinese kids do not take any pride in their work and the chinese QC is mostly nonexistent.

Thanks!

@diyhvacguy

11 ай бұрын

Thanks so much! 🙏🏻

@diyhvacguy could you discuss heatpumps and whether it's possible to convert a fairly new high efficiency gas furnace/AC to a heat pump?

@diyhvacguy

Жыл бұрын

I’ll do some brainstorming on this! Cheers

@MaMa-qh4dy

Жыл бұрын

If you live in a cold northern climate, stick with the gas furnace. You'll be glad you did.

Hey great job! Just subscribed to your channel I do have a question My carrier furnace the fumes coming outoff the 3"pipe outside the house are very strong it will actually hurt your eyes if are close enough to that area I replaced the inducer motor the whole assembly I olso checked the the pipe was clear or clean Furnace is about 18 year old The condense water the comes out the furnace is like brown color What would you recommend Or what do you thing is happening in there Thanks in advance for you help

@diyhvacguy

Жыл бұрын

You should have a technician come out and do a combustion analysis and see if there is an issue with the gas/air ratio. Sounds like it’s sending a lot of unburnt fumes out the vent.

@scott5654

Жыл бұрын

They’re called products of combustion, they’re not supposed to be pleasant.

hey i appreicate the video even though i watched it after i already replaced mine lmao. what causes a motor to go bad anyway? my motor was hanging up starting. just wondering if they go bad if ran too much or if they are just a long term wear part. thanks

@diyhvacguy

Жыл бұрын

This one was neglect for sure. You saw how dirty it was. They never changed the filters and overheated it I’m sure. Always keep your filters changed in a regular basis! Cheers

@frozenwalkway

Жыл бұрын

@@diyhvacguy is using too high of a filter level a stressor?

Do a video on a Trane 90 percent downflow furnace for all the guys that have never dealt with one of them

@diyhvacguy

Жыл бұрын

I’ll for sure do that next time I run into one.

I did mine A FEW years ago but now thinking could the capacitor been the cuilprit of it not working ? It was hot to the touch soo that made me think it was motor ..

I think if you just clean the dust out of the motor it would be fine. HA HA ! Love the video's.

@diyhvacguy

Жыл бұрын

Thanks so much!

I used this video to replace my blower motor and capacitor today. It was very helpful. However, the fan still doesn’t work. Any suggestions as to what to check next? It looks and sounds like everything is working but the blower motor won’t turn on.

@jdere31760

26 күн бұрын

Oh yeah, this what happens when people think they can watch a video like this and then they automatically became an HVAC technician. There is a shortage of techs because the job is touch and the working conditions suck most of the time. Hopefully no one gets electrocuted or gets their hand sliced open doing this work!

so are there universals for old electric mobile home blowers such as Coleman, Intertherm etc

@reneek7721

Жыл бұрын

There very well could be.

@diyhvacguy

Жыл бұрын

Yes absolutely.

My old motor has a brown wire running up to a box mounted on the wall next to the furnace. Does it go to a contactor ? should I delete it when installing a universal motor ? My replacement motor is three speeds. Can you show how to wire a three speed switch so I can slow or speed up the blower motor speed ? This is an old GE unit from apx 1979 that still runs great so it doesn't have a circuit board. Thank you.

@diyhvacguy

Жыл бұрын

If you’d like technical support check us out on Patreon.com/diyhvacguy Due to demand, I can’t answer tech questions on here without more info. Cheers

@scott5654

Жыл бұрын

@@diyhvacguy , It’s not due to demand, you gave up the answer when you asked him to pay for your answer.

@scott5654

Жыл бұрын

And this is exactly why you shouldn’t do things yourself.

Question, I have a 2.5 ton whole house heat pump that's 21 years old. It runs good with no issues. Is it coming to the end of life or should I just leave it alone until it dies? I've replaced control module and both fan motors in the past 7 years. This is a self contained system not the split unit.

@diyhvacguy

Жыл бұрын

The last thing you want is to be fixing it in the middle of summer, so my advice would be to replace. If you need some help locating the right equipment and finding a good price, email me at diyhvacguy@gmail.com Cheers

@marrowsteven

Жыл бұрын

@@diyhvacguy even if it still operates good?

@MaMa-qh4dy

Жыл бұрын

@@marrowsteven Run it until it dies! The new equipment is built like JUNK!!!! As long as you have back-up resistance heat for winter, you'll be able to limp through the cold until spring when you can decide to replace or repair. My heart is old, still works fine, but I never thought of replacing it!

Hi my friend how I get heat exchanger for my unit carrier

DIY gas piping connection which covers the whole cover plate =p

Do those universal motors come as a 2 speed, or are they usually single? Curious, can a 2 speed furnace be changed to only run on one speed? For instance if parts are not readily available.

@caru3257

Жыл бұрын

It may not work. Furnace starts the fan on heating and t-stat starts the fan on cooling. There may be a way to do it but I don’t give DIY advice.

@gnic76

Жыл бұрын

@@caru3257 Thanks, was just curious. I have a two speed furnace, no cooling. Generally runs at low speed for 10 minutes, unless really cold out and needs to run for longer heat cycle.

Why is the wire gauge so much thinner on the new motor?

Would this be the same procedure for an oil furnace?

@diyhvacguy

Жыл бұрын

Yes

The blower fan in my air handler is going up and down in speed. It'll go up to full speed for a few to several seconds, then drop down to a really low speed for a good while, and the it might jump back up. But since last night it doesn't seem to be blowing any air at all, and I hear a noise like a rumbling coming from inside, it sounds almost like its trying to turn but can't. Don't think its the capacitor because it'll still go up to full speed sometimes, just not for very long. Is this a failing blower motor?

@diyhvacguy

Жыл бұрын

It sounds like a failing blower motor. If you turn the power off you can spin the fan manually and if it has some resistance the motor is on its way out.

@diyhvacguy

Жыл бұрын

If you need more help diagnosing this, check out our Patreon page at Patreon.com/diyhvacguy where you can get remote one on one assistance with any hvac problem! Cheers

Hello my blower has five wires a black a red a blue a white a little yellow and a gray what does a gray one do

2 minutes and 48 seconds into the video I just cleaned my blower out from first being installed in February of 1984, could have knitted a dog sweater with what I pulled out of the fan

@diyhvacguy

Жыл бұрын

🤣

Where did you find the motor. Mine is obsolete

Link for the universal motor and the bracket please ....

I was looking for a lightweight blower for my deck. kzread.infoUgkxgioZQl3J5wPGAeDINzbieKbT5qomSEx3 There are some huge trees around my house and the leaves and pods drop all over my deck. Having to move furniture around to sweep has become too big a chore. This blower was the answer. It is light enough for this 70yr old lady and powerful enough to blow all the tree droppings off my rather large deck. Thank you B&D. Be aware the cord is not included. I use a 3 prong outdoor cord 25' cord for my 12' x 20' deck. The cord retainer works very well, but don't try to pass the plug through it. That is NOT how it works. You just have to loop the cord and it works great. One of my best purchases. Very happy.

So, been trying to find an "easy" understanding of what's going on with my central air. When there is power to the unit, the blower runs constantly. Thats whether it's calling for heat, AC, or nothing at all. It is most definitely not the thermostat (we have replaced the thermostat and even just disconnected it, and its the same deal). The only way to turn the fan off is with the emergency kill switch. Any thoughts?

@diyhvacguy

Жыл бұрын

So the heat and air work but it’s just always blowing air regardless? If you want to email me at diyhvacguy@gmail.com I can try to help you out

@mikeglasgow9618

Жыл бұрын

There is a BLOWER RELAY on the circuit board. That blower relay has a very tiny electrical arc on the CONTACTS of the relay. Over time.... these small minute little arcs can cause the blower relay on the circuit board to STAY CLOSED. . With the heat and air in the OFF POSITION......AND THE FAN IN " AUTO " . That is most likely the culprit. If you give the blower relay on the circuit board at this time. And the blower stops. Then that's about a 95 % chance that is your problem. Blower relay is usually black and about the size of 2 regular DICE put together.

@geudirosario-nu5qi

Жыл бұрын

I have the same issue on a new universal motor i put in on a Rheem motor won't shut off at all unless braker is off this is a 12 year old unit no board on furnace did anyone resolved this issue?

@mikeglasgow9618

Жыл бұрын

@@geudirosario-nu5qi is it an electric furnace ??

Where did you get motor at?

So my ? Is power off to CBRK and what about the gas do I have to turn it off to or not while replacing D motor.

@diyhvacguy

Жыл бұрын

The gas isn’t really needed since you are only messing with the fan but it’s always a safe practice. I typically just turn the switch off but I’m sure everyone will say to turn the breaker off just to be on the safe side 👍🏽

@jd24bdc72

Жыл бұрын

@@diyhvacguy thnk u🤙

you should have addressed the dust build up which can cause furnace issues

Are the capacitors polar sensitive?

@diyhvacguy

9 ай бұрын

No, these little ones with the two brown wires don’t matter which wire goes to which terminal. The ones with a dedicated c terminal do matter though.

I'm confused. You said the capacitor was bad, and the motor shaft appears to spin freely, so what was wrong with the motor?

@diyhvacguy

Жыл бұрын

My apologies, I meant to say the capacitor was GOOD 😂 I have a habit of mixing my words while on camera. Sorry for any confusion.

@SteveMasonCanada

Жыл бұрын

@@diyhvacguy No worries.

Where do I find your Amazon list at?

@diyhvacguy

Жыл бұрын

It’s in the video description, right under the video, there is a more button with 3 dots. Alternatively, here is a link :) : www.amazon.com/shop/thediyhvacguy?ref=ac_inf_tb_vh

Is there a "universal" motor replacement for a two stage motor with the capacitor on the back of the motor? These motors are crazy expensive!

@diyhvacguy

Жыл бұрын

Not sure on this. I picked this one up at the local Johnstone supply, so they made sure it would work for this furnace.

i wish my squirrel can be removed so easily

I'm so angry, (story time) so I decided to diy given I am a automotive technician. I have the tools, pretty decent experience in electrical/ mechanical items. Just had our upstairs unit replaced by some hvac techs for $4000......all of a sudden, downstairs unit which was rarely used as often starts acting up. Yes both units sit in closets side by side. Anyway,in an attempt to save money I decide to take care of it, I test capacitor, etc and everything is working but the blower motor which intermittently turns on. I order a new blower through the part number on our 3 ton unit (original, since house was built in roughly 2011 I think). Everything comes in. I get to disassembling the old blower from the unit but run into a snag where the shaft has so much rust built up that it won't come out even after trying to hammer it through. I take the whole assembly to work to see if my air hammer could do some convincing, which it did and left the screws in the garage on top of a spare refrigerator we have. About 1-2 days later when I have the time to finally get back into it. They've decided to clean the garage and all the screws are thrown out 🤦‍♂️. I lost interest in completing the task for a week or so but decided to order a screw/thread gauge from amazon to measure and replace the screws. By the time it gets here I'm too busy to get back to it. Everyone in the house knows that the unit is disassembled at this point so I have the blower assembly with the new motor laying in the garage ready and waiting. Guess what? Now it's gone. My assumption, while my uncle was visiting he was fixing things up around the house and just so happened to think the blower was trash. So now I've got a almost 15 year old functional unit with r22 without a blower in Florida and summer is a few weeks away.

Love your efforts, really! However, look like a Pro on your put back together with dirt on the board, et al, just does not show well i.e., if he is skipping a simple vac out, what other corners being cut here. Know you are smart enough to get this and TYVM.

@diyhvacguy

Жыл бұрын

This video was filmed in a super gross apartment, and at 9:00pm I might add. I was not inclined to spend any more time then needed. I simply couldn’t put that blower wheel back in the way it was though.

@ionu4535

Жыл бұрын

@@diyhvacguy Yep, been there, done that; working overtime will do that and TYVM.

Why didn't you clean/vacuum the board?

@diyhvacguy

Жыл бұрын

It was a rental that was beat up and it was very late when I did this replacement. I was ready to go home! HHa

@Amy_McFarland

Жыл бұрын

@@diyhvacguy Ha Ha, I can relate! Was just curious.

@TheMinnow101

Жыл бұрын

@@diyhvacguy That's really not a customer inspiring reply... Regardless who the customer is, you are still getting paid to do a respectable job.

3 IN 1 would have got you right.

why didnt you replace the capacitor instead?

@diyhvacguy

Жыл бұрын

I checked the capacitor and it wasn’t out of spec. The motor was definitely bad.

@craigkohler2641

Жыл бұрын

@@diyhvacguy you stated in the video that the capacitor was bad

@realSamAndrew

Жыл бұрын

@@craigkohler2641 correct, that happened at 0:36 . Dave, did you misspeak in the video?

Can't you clean and repair the same motor?

Those universal blower motors were running less than $100 online before the pandemic. I am really surprised that the supply house sold you parts.

@diyhvacguy

Жыл бұрын

Well I’m an hvac contractor but sometimes if you go in and act like you don’t know any better they will sell you a part :) I’ve seen it happen first hand a few times while I was in there picking up a part

vidio is ok

Looks like you need a new filter...never seen one that nasty, and a fire hazard!

@diyhvacguy

Жыл бұрын

It’s a run down rental. They only have me do the minimum but I couldn’t let that blower wheel slide. Cheers

Mercy please vacuum inside the cabinet first.

Am I the only one noticing it was still dirty but also left it wet?

@justinberry3991

13 күн бұрын

It's not his. What does he care.

You forgot to tell them about the rotational wires.

@chezchezchezchez

Жыл бұрын

Tell me!

@ohiopat

Жыл бұрын

@@chezchezchezchez There are a pair of short wires that you can switch to make the blower run the other way. There is a big tag on the wires that explains it but you do need to check that the blower is going the right direction before you finish. The one he was working on needed to run ccw to blow air up into the cabinet.

@scott5654

Жыл бұрын

@@ohiopat 🤣🤣CCW ???

@aland680

Жыл бұрын

@@scott5654 counter clockwise

@scott5654

Жыл бұрын

@@aland680 It goes counterclockwise from both directions. If you’re looking at it from the right side and it’s going counterclockwise is that correct? Or if you look at it from the left side and it’s going counterclockwise, is that correct? This is no minor technicality. CCWLE is an important thing to understand, isn’t it?

Looks like that dude had a missing filter for years!

@diyhvacguy

Жыл бұрын

Yea it’s a nasty rental property and very poorly maintained