How To Install a Throttle Cable on Any Small Engine
Тәжірибелік нұсқаулар және стиль
Installing a throttle cable is very easy if you understand the mechanics of how it works. This video will show you how to install a throttle cable on any small engine 3HP, 5HP 6.5HP 8HP 11HP & 13HP engines. This demonstration was done on a Honda GX200 6.5HP engine but this is also the same procedure on a Predator 212 6.5HP engine.
Heres a link to the throttle cable I used in the video: amzn.to/2IrWcEg
You can also buy the GX200 engine here on Amazon: amzn.to/2VOmmsU
Пікірлер: 49
This clip is the definition of what instructional videos should be. You're obviously the full quid on small engines but the planning of your clear explanation is also obvious in that there was no waffle or "let's try that again" moments, made all the better by the absence of pointless and irritating free-to-use music. MOST importantly, you taught me something useful and saved me money. Thanks for your generous sharing. Good onya!
@Archifx
2 жыл бұрын
Wow! Thanks a bunch!!!
@paulmckenzie4291
2 жыл бұрын
@@Archifx As a recent escapee from the education system, I understand the effort it takes to present new information in a logical sequence using clear language without skipping steps or assuming the 'student' has prior knowledge. You're camera positioning/framing was spot. Genuine appreciation well earned, mate. Now don't get me started on carburettors, gaskets and starter cords! Thanks again👍
Thanks sooo much. Turned my gx390 into a mud motor and have been looking everywhere for a cable stop bolt with the hole in it. Thanks to the z bend, I know longer need the bolt with the hole in it, just the cramp that holds the sheath in place which I already have.
Thanks so much for this! Just replaced a BS engine on a Garden Way reel mower (now Mclane) and was scratching my head on this part. Now I dont need to replace the throttle!
Hey thanks man! This video helped me make sense of the instructions for my new plate compactor.
Very helpful video. Thanks!
Awesome video, thanks so much.
Thank you so much I did not no how to connect my the throttle to the motor and now my mini bike works thank ypu
Thanks! This was super helpful
Thanks. Worked great.
Excellent, thank you
You're the only one I could find.That would show how to do The throttle For that I subscribe to you I thank you for making the video
Thank you very much !!! simple that's what I like!!🙃😁
Thanks for the short video I was always wondring how to do this it seams pretty simple but it's great to have a video to show how to do it!
Great video straight to the point whiteout stupid theatrics great job
Nice job!
Dude that’s fucking crazy I’ve never seen a throttle cable that was like a coat hanger wire normally I just get threaded wire much like a bicycle cable but overall I love the video excellent job on executing that
very helpful I was stack thanks
I'm putting a roto tiller engine on an old dingo go kart and couldn't figure out the throttle. Time to order a cable and give it another go. The project sat idle for 8 months 🤦♂️
Thanks man
Thanks sooo much. Turned my gx390 into a mud motor and
Thanks!!! Will do... Great explaination...
Excellent video
@Archifx
3 жыл бұрын
Thanks
Thanks!
Genial, compre esta maquina y no se sostiene la velocidad, Gracias brother
Hey man I love your vids, I just got a go kart from my neighbor and it is very old, it runs fine and everything but I really need help for taking off the motor, is there any way we could like FaceTime maybe, I’m sorry for asking but I really need help, thanks haha
Is it possible to switch the throttle and the choke when replacing the carburetor
Is it possible to use the choke with a cable on that specific engine too?
Sir, I also have Honda's Triller in it, the problem of accelerators is coming in it.. it has its own accelerator increase, it is not decreasing.. can you help me out to resolve this problem
I am interested in buying one of these engines but I've saw some throttles not having springs and remain where you set them, can someone tell me what they are about?
The throttle cable. What is it called I noticed it is metal and bendable. I need it what is it called?
What if I need one of those ball looking things on the ends
Shouldn't the metal end cap on the plastic cable housing be put back on after you trimmed the housing? It looks like it wasn't on when you put the cable under the retaining clip, which would pinch the cable, causing unnecessary friction.
@Archifx
4 жыл бұрын
You could.... it’s so minimal and the cable shroud is reinforced with metal. It doesn’t crush under normal torque.
👍👍
ahhh man! what if we have the wire type cable? 😩😩😩😩😩😩
Did u buy the retainer or did it come with the engine
Damit need another cable cheers on the vid tho
is that a tick at 4:20
@starsixtyseven195
5 ай бұрын
No
Yes and once i fix this something else breaks 😂
We’re did you get that throttle
@Archifx
2 жыл бұрын
amzn.to/32pdW0Y
I see you decided to go with a Honda instead of the Predator. I have both engines and reliability has been equal.
@Archifx
4 жыл бұрын
Yep... My dad and I decided to use the Predator on a different project and run the Honda on the KEE. I cover it in my next video.
@williams6262
4 жыл бұрын
I have had good luck with the predator on an old tiller, but the Kee deserves the real deal. Good decision.
I want a carburetor a toy build chiller rebuilt carburetor Rebuilt carburetor on time built tiller motor