How To Install A Siouxicide Choppers 39mm Slip-on Springer Front End On Harley-Davidson Sportsters
Автокөліктер мен көлік құралдары
This video is brought to you by: www.lowbrowcustoms.com
In this video you will learn how to install a Siouxicide Choppers 39mm Springer Front end for Harley-Davidson Sportsters. This springer is a great and easy solution for the garage builder who wants the look of a traditional springer on their Sportster without all the hassle of having changing out a lot of the stock parts, such as risers, handlebars, brake caliper, and gas tank when running a traditional style springer. Todd walks you through step by step on how to disassemble your front end and install this Siouxicide Chopper springer. So follow along as he gives you helpful tips and tricks to get you back on the road styling. Let's Go!
**EDITOR NOTE** The top bracket that holds the rear legs under the top triple tree and allows for the new headlight to be mounted was accidentally installed upside down in this tutorial. Please look at directions that comes with the kit and install the top bracket the correct way for proper installation. This will also allow for better handling. We are only human and do make mistakes. Sorry for the inconvenience.***
Products shown in this video:
39mm Springer Front end - www.lowbrowcustoms.com/collec...
Brake Caliper Bracket: www.lowbrowcustoms.com/collec...
Music liscened by Artlist.io
Пікірлер: 105
If you guys keep doing these Sporty build vids, I’m going to have to buy a used one and a bunch of stuff from you.
@SirGuidemere91
Жыл бұрын
Precisely lol
@tommyt2854
Жыл бұрын
Ditto. With this Springer and that weld on hardtail, it would actually be a pretty sweet bike.
@fireball1322
Жыл бұрын
That's why he's doing it..............LOL
@SGTJDerek
Жыл бұрын
Good luck. Sporties are getting hard to find around here and the ones that do come up are overpriced.
@SGTJDerek
Жыл бұрын
@@tommyt2854 I actually have a recipe in my head for just that but with an Old Skool Pogo seat and split tanks. Been watching Wheels Through Time WAY to much🤣.
Todd seems like an old friend. Super down to earth. Very knowledgeable. I hope you all know how lucky you are to have a guy like this on your team! thanks for all you do!
While I’m not planning on getting a springer, I never miss a video from Todd! Excellent video as always!
More content featuring Todd, please! I dont even own a harley, yet I love to watch his build videos.
In all honesty, blown away by this item. Been looking to put a Springer on my wife's 48 for some time now, but did not want to go to the hassle of breaking everything down including triple trees, handlebars, risers, and all the electrical wiring and extensions that come with it. What a beautiful design and simplicity 💥💥💥💥💥💥
@lowbrowcustoms
Жыл бұрын
48's have a mid glide 39mm, unfortunately, you wont be able to run it, its for narrow glides. if you found your self a set of narrow 39mm and changed them out it could work but the stock trees on the 48 are too wide.
@josephpetrizio78
Жыл бұрын
@@lowbrowcustoms Actually went on website and there is an application for the 48💥💥💥💥💥. Check it out 💪💪💪
@lowbrowcustoms
Жыл бұрын
@@josephpetrizio78 noice, yeah siouxicide has them on their site. I was just referencing the one we used in this vid if that's what you were thinking would work. All good, and thanks for doing the research and hope it works out good for you. cheers
In Todd We Trust
Right on 💪 I have been thinking about this installation for a long time, and now it's time for a springer 🤘😎
Nice looking part and seems easily installed. Now we just need a new Saturday Sportster series! Wooo
@daveco1270
Жыл бұрын
I wouldn't mind seeing a vintage Triumph on the next series. They wouldn't be able to call it Saturday Sportster though. Thursday Triumph maybe.
@piriguin2211
Жыл бұрын
@@daveco1270 Tuesday Triumph! Awesome
Wow great to see you still going. Much Props!!! Wish i saw this sooner. Hope you are well. TFR
Glad to see a new video from y'all, thank you..keep em coming
Awsome to see these guys sell good quality stuff, I'm about a mile or two away from them😂
Holy cow!!! That is the dopeness! Add a kickstarter too. I know Led Sled makes a kicker kit. Not sure if there are any other good options. Anyway, thanks for treating Sportys with the respect they deserve. Stay frosty.
I put one on my sporty couple years ago and I love it.
@bibbpimpin
11 ай бұрын
Anywhere I could see some pictures of it?
Hello Todd. Another great video. Thank you
Springer front ends are great...not to mention that you don't loose overall wheel base...also springers are much softer and hell of alot more comfortable then forks... Proud owner of a 89 fxsts and a 14 xl1200c
I wish you were close enough, You are a fantastic wrench bro.
When these come out in 6 over and 8 over I'll have to replace my 6 over tubes I just bought from you guys a year ago haha
They need a collar at the top to center the outter springs on the top so when you tighten them down they dont push sideways like the driverside spring did on todd when he was turning the nut the last time right before he measured the threads showing
My sportster chopper gets my old lady way way more wet than the street glide ever could, thank you for making my bike bad fucking ass and getting my old lady wet again, cheers to lowbrow 🤘🏻
Pretty sweet idea!
Awesome brother
Another EXCEPTION VIDEO!
AWESOME!!!
Cool thank you
Looks nice. But does it hop like the ol school springers used to
"How many times did I say loctite? Just use some, OK?" I re-watch all the videos that you host.
All it needs now are Brembos all around, quality rear shocks ...and a 6th gear.
dope
Muito bom o conteúdo.
@lowbrowcustoms
Жыл бұрын
Muito obrigado cara! desfrutar
Who need a front brake lol just take it off 😂👍🏼 RAD VIDEO
I found it easier to use the ratchet strap; and have the wheel on the axle using the weight of the bike to help, to compress the springs far enough to switch over to using a LARGE C-Clamp to finish compressing the springs. I had 3 different straps that the ratchet failed every time before compressing the springs far enough to start the nuts. As for how much tension is on those springs; when the strap ratchets failed, my front wheel wound up at least a foot off of the ground.
Cool
I have a Sportster Roadster, dual front disk. Can I buy two brackets and keep dual disk?
اقسم بالله حبييييت👍🏼
Any torque settings for these bolts and fittings?
I like the idea, but adding rockers with triple trees that already have offset built in , doubles the bikes trail..
Wouldn't mind trying this on my 96 fxdl but it came with dual disc brakes on it.
@lowbrowcustoms
Жыл бұрын
sorry yeah, only can run one on this version.
Nice, hooligan tracker front end in the next vid?
I live in Sioux city iowa we have a suicide choppers here can I get that kit here
Do they have one that'll fit a ol 78 fxe??
niice!
Do they make these for an 05 Lowrider? Dont seem to see these...
Trying to findout more about the spingerfork you are putting on but can't anyhelp would be appreciated eddie dowse from Australia 😊
@lowbrowcustoms
4 ай бұрын
We don't carry them anymore but the maker still makes them. www.siouxicidechoppers.com/store/siouxicide-choppers-springer-kit-39mm
I just bought a 1977 sports dryer head. It's got some God off a long fork on it. The tubes look like Six inches over but I don't know what they really are but it's got awful ugly and I want to get the friending leveled back out I want to put a Springer front end on it but I don't know what size Springer to order. I thought maybe I'd get a four inch under and it would level it back out but I don't want to buy it and then have the front frame Drag the ground can you help me out
Do You Have A Springer For A 2006 Harley Sportster 1200 Low That Will Fit My Bike
I'm surprised they would use anti-seize, instead of like Marine grease on that bushing but it's not my engineering or my part. But I do like the idea of using the original triple trees....
@lowbrowcustoms
Жыл бұрын
you could use marine grease too.. whatever your heart desires as long as those bushings can move freely
@MoeLarrycurly1
Жыл бұрын
@@lowbrowcustoms well I try and pick out the best for whatever application it is that's the only reason I bought up brought up that question.. thanks for the reply....🖖
Dude it looks just like mine!😁
hi where can you buy?
what does the finished bike look like
Your having too much fun !!!! Lol...
I love to get that front end and put it on my sportster. However with this economy I have trouble understand when and where $1400 is going to fall out of the sky and into my lap. That is more than 1/6 of the price I paid for my USED sportster.
@Rob-lj1jl
Жыл бұрын
Exactly, 3 times the price of the regular ones and if you factor in shipping to Canada, exchange rate and duty the price is about 2500US
Would this fit on my 96 Sporty XL1200c
@lowbrowcustoms
8 ай бұрын
Yeah anything that has a 39MM front end. we stopped carrying them but you can find them here www.siouxicidechoppers.com/store/siouxicide-choppers-springer-kit-39mm
What if we skip the inner spirngs? Would it be softer when ridden?
@BuiltatBlackjacks
3 ай бұрын
You know when you hit a free spring it goes "boing"? That being iscthe spring frequency. Undamped springs bounce up and down. The double springs are so they have conflicting frequencies to keep it from acting like the pogo stick you had as a kid...
@NostalgiaTVCibinong
3 ай бұрын
@@BuiltatBlackjacks how can I didnt think about it. Thx man
Is there one that is 2 inch taller? Lol for a 2021 iron 883
Whooo
How much is the spriner
Couldnt you just mount the front wheel and set the bike on the ground and you wouldnt need the strap..? Just a thought. 😊
Am i missing the link to this product?
@lowbrowcustoms
11 ай бұрын
Discontinued from our site
I have to imagine the trail geometry on this setup is severely compromised. Opinions?
@iMaNii4k
Жыл бұрын
This kit is junk lol
@BuiltatBlackjacks
3 ай бұрын
Looks to me like it's a bit longer than stock? If the sums were done properly, then the increase in trail from the over length "springer" would balance out the decrease from the springer geometry. But I didn't design it, so that's just a guess.
Are you no longer carrying this? The link is broken.
👍😎👍
Conclusion: LOCTITE !! 😂😂
At least this is way more advanced than the Eric barros aka yammie noob tail tidy shop.
Cool idea,but if you have the skills to properly install this and complete all the other modifications required then you could also just install a normal springer.
@lowbrowcustoms
Жыл бұрын
yes this is true, some people dont have those skills and still want the look, hence the part. :)
Ablen en castellano quiero saber lo que dicen porfavor me gusta
👍
I don't think I'll be buying this when even your own site has full springers for $500 less than these, Nuts!
Yeah just skip the boring headlight part that contains 80% of the bikes electrical wiring 😂
🤣
omg who would pay money to do that to a sportster?
That thing is hideous.
Ewwwww lol that setup is just wrong, get a real springer, it’s more work to assemble the spring assembly than it is to just pull the stem out
Will this springer work on my 98 1200
I no like :