How to Install a Reverse Camera for a Nissan Frontier

Автокөліктер мен көлік құралдары

We are going over the steps to install an aftermarket reverse camera on a 2009 Nissan Frontier XE. In a recent video, we installed an aftermarket radio which came with a reverse camera. We are going over the process to run the camera wiring from the front of the truck to the rear.
1. Before/After - 0:01
2. Step 1 (Remove Front Kick Plate) - 1:01
3. Step 2 (Remove Rear Kick Plate) - 1:15
4. Step 3 (Remove Seat Base Trim Panels) - 1:39
5. Step 4 (Remove Seat Cushion Bolts) - 2:18
6. Step 5 (Remove Seat Cushion Assembly) - 2:37
7. Step 6 (Remove Seatback Assembly Bolt) - 2:47
8. Step 7 (Remove Seatback Assembly) - 3:00
9. Step 8 (Remove Jack Storage Cover) - 3:18
10. Step 9 (Remove Child Seat Anchor Cover) - 3:37
11. Step 10 (Remove Headrests) - 3:42
12. Step 11 (Remove Rear Panel) - 3:57
13. Step 12 (Remove Rear Hole Plug) - 4:47
14. Step 13 (Remove Rear Lower Finisher) - 4:58
15. Step 14 (Run Camera Cable (Interior)) - 5:32
16. Step 15 (Apply Sealant (Cable Entry)) - 7:21
17. Step 16 (Install Rear Lower Finisher) - 7:34
18. Step 17 (Install Rear Kick Plate) - 7:49
19. Step 18 (Install Front Kick Plate) - 7:58
20. Step 19 (Install Rear Panel) - 8:18
21. Step 20 (Install Jack Storage Cover) - 9:02
22. Step 21 (Install Headrests & Child Seat Anchor Cover) - 9:10
23. Step 22 (Install Seatback Assembly) - 9:20
24. Step 23 (Install Seatback Assembly Bolt) - 9:27
25. Step 24 (Torque Seatback Assembly Bolt) - 9:42
26. Step 25 (Install Seat Cushion Assembly & Bolts) - 9:48
27. Step 26 (Torque Seat Cushion Assembly Bolts) - 10:04
28. Step 27 (Install Seat Base Trim Panels) - 10:22
29. Step 28 (Prep Trailer Wiring Harness) - 10:47
30. Step 29 (Run Camera Cable (Exterior)) - 13:47
31. Step 30 (Connect Wiring Harness and Cables) - 14:48
32. Step 31 (Remove License Plate) - 15:36
33. Step 32 (Attach Camera to Bracket) - 15:52
34. Step 33 (Install Camera Bracket) - 16:20
35. Step 34 (Test Camera) - 16:40
36. Show it off - 18:05
Products Used:
This video contains affiliate links for which I may receive compensation.
Double Din Car Stereo - amzn.to/4bdPMVn
Universal License Plate Bracket - amzn.to/44kRIZr
4-Way Trailer Wiring Harness - amzn.to/3w5cUpK
1/4" Loom Tubing - amzn.to/3JFKBB4
Rubber Grommets Kit - amzn.to/4bfusy0
Heat Shrink Tubing - amzn.to/4a1F82t
Hook and Pick Set - amzn.to/4aY7lZk
Silicone Adhesive Sealant - amzn.to/3QqT0MA
Cable Zip Ties - amzn.to/3Wi4vd7
Theadlocker - amzn.to/3UDRlpB
Crimping Tool Kit - amzn.to/44scpT9
Trim Removal Tool Set - amzn.to/35Lry84
Wire Stripper - amzn.to/3TP9MpL
Tools:
10mm Socket
1/4" Socket Wrench
Cable Zip Ties
Crimping Tool
Heat Shrink Tubing
Hook and Pick Set
Phillips Screwdriver
Pliers
Theadlocker
Trim Removal Tool Set
Wire Stripper
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZread is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZread. Use this information at your own risk.
#Frontier #ReverseCamera

Пікірлер: 12

  • @NetQuil
    @NetQuil17 күн бұрын

    Underrated channel. More tutorials should be like this. Just bought a 2008 and am looking forward to doing this upgrade

  • @mcgurrentertainment

    @mcgurrentertainment

    17 күн бұрын

    Thank you very much. It really does mean a lot

  • @nateshaw6367
    @nateshaw63672 күн бұрын

    "Basically", it's a great tutorial. 😂

  • @mcgurrentertainment

    @mcgurrentertainment

    2 күн бұрын

    Thank you!!!

  • @yayajabber5030
    @yayajabber50302 ай бұрын

    Brother you are making things fun and easy to do. Thanks a lot.

  • @mcgurrentertainment

    @mcgurrentertainment

    Ай бұрын

    Thank you

  • @isaaco.1478
    @isaaco.147816 күн бұрын

    This format makes it easy to work on my truck. Could you do a video on how you installed the inverter?

  • @mcgurrentertainment

    @mcgurrentertainment

    15 күн бұрын

    Thank you. I wish i did record the installation. Sadly, it would be difficult to create a video without tearing everything out and recreating the process.

  • @mvo5559
    @mvo55595 күн бұрын

    Bro I would love a tutorial of how to install this camera in a 4 door car 🙏🏼

  • @mcgurrentertainment

    @mcgurrentertainment

    4 күн бұрын

    Gotcha. I will make a mental note if the opportunity arises.

  • @yayajabber5030
    @yayajabber50302 ай бұрын

    Do you have any videos about keyless entry. For the same car. Thanks

  • @mcgurrentertainment

    @mcgurrentertainment

    Ай бұрын

    Not yet, but that's a good idea

Келесі