How to Install a Qettle boiling water tap!
Тәжірибелік нұсқаулар және стиль
Always read the instructions!! 🤦🏽♂️Installing a Boiling Water Tap!
In this episode Ive got a waste disposal unit to remove and install a 4 in 1 boiling hot water tap.
Qettle type... was I a fan of it.. I feel there is better boiling taps on the market to install!
However I could have made my life easier by reading the sodding instructions!
0:00 Intro
1:10 Removal of waste disposal unit
2:30 Whats in the box?
3:08 Removal of old tap
3:38 Lets do this!
14:10 Outro
As always thank you so much for watching!
Пікірлер: 74
3420/4000 Subscriber goal… 🎉 can you help 🙏🏽 Please like, share and comment, much love as always! ❤
This sort of job is such a pain in the arse thanks for the upload
@Heatking
6 ай бұрын
Cheers Keith! Youre right mate 😂
Good vid Dan - we all do the same, fit it and then check the instructions 😂
@Heatking
6 ай бұрын
Haha cheers Chiggs 🙏🏽🙏🏽
Good to see the jobbing plumbing video's
@Heatking
3 күн бұрын
@@ianpotter3704 cheers mate. Plenty more to come :)
Everyone makes mistakes bro great videos👍
@Heatking
6 ай бұрын
Cheers James 💪🏼
Well that was definitely a change, very interestibg video 👍
@Heatking
6 ай бұрын
Thank you mate 🙏🏽
Expensive to run hot taps!!
Instructions? What does that mean? 😂 great video Dan
@Heatking
6 ай бұрын
Haha That’s what I thought mate. See if I hadn’t of read them. I’d of been none no wiser so shouldn’t have read them! Haha
@AaronM4275
6 ай бұрын
👏😂😂
It's probably better where you've put it as you can actually see it if it goes wrong.
@Heatking
6 ай бұрын
Yeh that’s true mate.
I've only ever fitting one boiling tap before and I thought to myself then, I wonder if it'll void the warranty if I hard pipe all this rather than these flexi's everywhere, would be a much neater job :D Easy mistake on the non-return valve, oops! ah well at least the sink won't gurgle while the dishwasher is emptying now
@Heatking
6 ай бұрын
Haha yeh that’s true mate. If the Flexis were shorter, we could make it a neater job. I understand why they make them long though… so diyers can install them haha.
@killerbean9911
6 ай бұрын
@@Heatking haha that's it! Definitely would look loads better hard piped
Yuk, did you wash it down with a cup of coffee, enjoy your weekend Dan. 😊
@Heatking
6 ай бұрын
Haha I didn’t mate. As none was on offer!! 😂 you too mate!
@paulj9022
6 ай бұрын
@@Heatking your joking, I looked after my gas engineer, and electrician’s when I moved here in March, bacon butties, fry up, tea coffee and cake all the time. I’m too soft hearted, 😂
That’s a pretty cool system for add on hot water system. Although I totally freak out at the idea that there is so much electrical wires right under the sink where it may leak someday and cause a bigger problem. Over here the code don’t even allow sockets underneath the kitchen sink and if you want hot water there you gotta use the storage water heaters. But it was so interesting to see this install mate. Thanks for the video
@Heatking
6 ай бұрын
Thanks mate, and interesting to know what it’s like over there too! Yeh it’s quite common having sockets under kitchen sinks here in the uk! Haha
@richardlewis5316
6 ай бұрын
Under many sinks there is a socket for the washing machine and one for the dishwasher. I always put them away from any potential leaks but most houses have RCDs so a leak would not kill anyone! (UK)
Like the explanations on things mate ❤
@Heatking
6 ай бұрын
Thank you Lee 🙏🏽
Brilliant timing for your video. I have a Quooker tap to install in January. I'll take your advice - spend time reading the instructions first!!
@Heatking
6 ай бұрын
Haha thank You Richard! Yes definitely do that. And it should be straight forward! Haha
You made it look so easy Dan 😂😂 Brilliantly Done 👍👍🤜
@Heatking
6 ай бұрын
Haha thanks Tony, although do I detect a hint of sarcasm? 😂😂😂
That tool to cut the pipe is mint, normally heat up some 15mm to make a hole. Them boiling taps look a mess underneath, so many pipes but they am good, do like them.
@Heatking
6 ай бұрын
Cheers mate, yeh the little tool was a beast 😂😂 and you’re right.. you can’t really make them look pretty underneath!
Great video! OMG that dishwasher outlet drip! Hope you didn’t get a bad reaction from it!
@Heatking
6 ай бұрын
Haha cheers mate. Nooo thankfully it didn’t react with me 😂😂😂
Quality video Dan never done one of these yet so good to get some knowledge on them pal.
@Heatking
6 ай бұрын
Thank you mate. Yeh just learn from my mistakes 🙏🏽🙏🏽🙏🏽
Nice video Dan, hell of a lot of pipes. I must admit I don't usually read instructions, unless it doesn't work. Then of course you may have buggered something up. So I must behave in future! They are there for a reason.
@Heatking
6 ай бұрын
Haha. Yeh that’s the same attitude I have mate 😂😂 Us men should learn to do better 😂
That's alot of things to go wrong in terms of pipework and t it takes alot of space aswell I will stick to a kettle thanks 👍
@Heatking
6 ай бұрын
Cheers Jay, yeh going forward I don’t think I’d recommend this particular brand.
Real blokes don’t read instructions! We just mess it up and then go back to them to see what we done wrong! 😂😂😂
@Heatking
6 ай бұрын
😂😂😂 this is true mate!
You did right Dan sink macerators are banned from being connected to mains drainage last year, I’m imagining the flavour out that overflow
@Heatking
6 ай бұрын
I didn’t know that! So they’re no banned from mains drainage? 😵 and the flavour… 🤢 rank haha
@stephenfanthorpe2708
6 ай бұрын
@@Heatking yea not allowed to be connected environment act 2021 , I think it’s because treatment plants and sewers can’t handle the thick soup, yummy cant beat those tradesman special flavours m8 🤣
@Heatking
6 ай бұрын
@@stephenfanthorpe2708 😂😂😂 that’s for the info though mate, didn’t know that!
I don’t silicone my kitchen wastes
I had a a scale reducer fitted as part of a new boiler installation. It was fitted around 200mm below the boiler yet the instructions said it had to be a minimum of at least a metre away. I made them move it despite them saying that was where they always fitted it.
You could have just ran a new prv to outside like you would on a boiler or cylinder.. great video mate
@Heatking
6 ай бұрын
I thought of doing that at one point mate, but thought it would have been easier to connect into the waste 🤦🏽♂️😂 thanks buddy!
@Heatking
6 ай бұрын
I thought of doing that at one point mate, but thought it would have been easier to connect into the waste 🤦🏽♂️😂 thanks buddy!
@colinb6035
6 ай бұрын
Possible boiling water discharging through a flexi pipe into solvent welded plastic pipe!!!
Bit violent that thing 😂
@Heatking
6 ай бұрын
😂😂 you’re not kidding!
Mate you did avreal tidy job of that. I think the boiling taps are a complete waste of time. Luckily you had a nice big unit to fit in. I fitted a Quooker unit in a 600mm wide base unit….not even room to fart in there😂😂👍🏼👊🏼
@Heatking
6 ай бұрын
😂😂 I still think it looked a mess under there mate 😂 but thank you, yeh I would like to Fit this is a 600mm unit! 😂😂😂
What i don’t understand, my Nespresso is tiny and produces almost 100 degree water. Why are these units so large (and expensive) lol
@Heatking
6 ай бұрын
Valid point haha. The size is down to the amount of litres they boil up. But the expense… haha no idea!!
Such a pain! Seriously, just boil a kettle?
@Heatking
6 ай бұрын
😂 I don’t see the appeal either.
@Heatking
6 ай бұрын
😂 I don’t see the appeal either.
Better off with the Scott and James hot water tap no blow off or anything required.
@Heatking
6 ай бұрын
I agree mate, this was a right pain! Customer supplied though.
These things are the thief of time to fit, I've been caught out pricing kitchen/extension jobs when the customer/kitchen company supplies a fancy setup that has a PRV to outside and a separate vessel. You allowed a hour for undersink second fixing and end up spending half a day ! and customer never wants to cover the extra....................
@Heatking
6 ай бұрын
Yep I fully agree with you Julian. I’ve fitted other brands of these though that don’t take any time at all. But this was a pain 😂😂😂
I never read the instructions 🤦
@Heatking
6 ай бұрын
😂😂 I think it’s a male thing mate.
🤘😎🤘🫖☕️💨
@Heatking
6 ай бұрын
Happy new year pal! 🙏🏽
As you get older you’ll realize that this sort of job is such a pain in the arse , you can say no
@Heatking
6 ай бұрын
Haha I always realise it afterwards mate! 😂😂😂😂