How to Install A Nuna EXEC All-in-One Rear-Facing in a Tesla Model 3
Wondering how to install your Nuna EXEC safely and correctly? I show you how to install the EXEC in a Tesla Model 3, but these techniques can be used to install your seat in any vehicle.
Please Like and Subscribe to my channel for more installation and carseat videos!
Nuna EXEC: fave.co/3Wqj4cG
The Nuna EXEC can be used in the following manner:
Rear-facing: 5-50 lbs. with a height limit of 49" or less, up to at least age 2 (longer preferred)
Forward-facing: 22-65 lbs. with a height limit of 49" or less, starting at age 2 or older
Highback booster: 40-120 lbs. with a height limit of 38-57" starting at age 4 at a minimum
It has True Tension doors for both rear- and forward-facing. These doors are belt tensioners, which make tight installations super easy for most vehicles. While these may give a secure installation, they should not be confused with lockoffs. Read more here (and of course, watch the installation video!): carseatsite.com/lockoffsbeltt....
DISCLAIMER: Some links may be affiliate links. If you make a purchase, I may receive a small commission at no charge to you. As an affiliate, I earn from qualifying purchases. Thank you for supporting CarSeatSite!
0:00 Intro
0:06 Discuss weight limits
1:05 Show position and use of recline buttons
1:15 Discuss recline angle indicator
1:51 Set up leg rest in anti-rebound bar position
2:58 Remove infant insert
3:49 Discuss weight limits of infant insert, when to use harness padding
4:40 Discuss rear-facing belt path and how to find it
5:50 Cup holders! 😉
7:51 How to open True Tension door for installation
8:01 Pull the seat belt through the belt path and True Tension door-plus tips!
8:39 Check for tightness: where to check, how tight
9:14 How to start over if you want to re-do the installation
9:38 Complete the installation by locking the seat belt
10:12 Where harness should be for rear-facing kids
10:43 Finished!
10:47 How to uninstall a ClickTight seat
11:29 Thank you for watching and please subscribe! 😊
Пікірлер: 20
Legal guy sent us. Will share
Thank you 🙏🏽
Is the thing by the feet able to go straight out for extended leg room? Or is it more for forward facing
@alyssabrooke7168
Ай бұрын
Because I already have the nuna rava and wanted to get another nuna but I was going to get this thinking the foot thing was for extended rear facing.
@CarSeatSite
Ай бұрын
@@alyssabrooke7168 For rear-facing, it's use is for anti-rebound, so it is placed tight against the vehicle seat back. The Rava will give your child a little bit more leg room when RF, but the EXEC does have the booster capability.
@alyssabrooke7168
Ай бұрын
@@CarSeatSite thank u so much! I ordered the exec last night. We love nuna!
@CarSeatSite
Ай бұрын
@@alyssabrooke7168 I’m sure you’ll love it!
Can you do all 3 across rear facing with nuna exec on model 3?
@CarSeatSite
4 ай бұрын
Hi. No. The Exec is too wide to fit 3-across in the M3. The closest I’ve come to doing a 3-across is with the Graco SlimFit 3 LX/True3Fit LX (must have 3 in the name). The Britax Poplar is very narrow as well, but won’t work as a forward-facing seat due to the vehicle head restraint.
@TheXtine10
4 ай бұрын
@@CarSeatSite thank you. But this nuna exec can do all 3 across with model Y right?
@CarSeatSite
4 ай бұрын
You didn't say what configuration they need to be in, but 3 Execs facing all the same direction in the MY will be very tight. Do-able, yes, though the side impact pods at the top of the carseat may be damaged by being squished together.
@TheXtine10
4 ай бұрын
@@CarSeatSiteoh yes the 3 across rear facing. Hehe
@CarSeatSite
4 ай бұрын
You know . . . If you’re open to the Britax Poplar/Poplar S, that would easily work. It’s narrower than the Exec and will work with the MY head restraints because you can remove them on the sides if you ever place them there (if you use one in combo with the Exec, for example). Here’s a link: amzn.to/49ugZls . (This is an affiliate link).
Interacting