How To Install A Dimmer Switch
If you want to help support Shannon to produce more videos like this, visit www.house-impr...
Shannon from www.house-impr... shows you how to install a dimmer light switch (in place of an existing light switch).
If you have questions about your home improvement projects, stop by the forum on our website, where Shannon will answer your questions in detail for free.
Website: www.house-impr...
Facebook: / 180657245288627
Twitter: / house_improve
Video © 2018 SKS Media. Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.
Пікірлер: 64
If everyone was humbled like you Shannon what a better place this world would be.
0:38 “it could definitely kill you, haha” I had to laugh as well
Simpler than I thought. Thanks.
Thanks. I reference your electrical videos every step of the way for my DIY rehab!
Thank you.
Thank you
Thanks 👍
Straight to the point . thank you
I live in California My toggle switches currently are not grounded...it looks like the box the wires are in is plastic...should I still add a ground? Or is it not necessary?
Electrical tape around the terminals is best practice
Thank you!! I is very clear
Thank you for shearing!
great advice on taking picture
Ok i have a question 4u so my bedroom has no overhead light but has a lightswitch but idk what its for but my husband installed recessed lights in ceiling and wants to change the old switch to a new dimming light switch but he wants to know how do u wire that new from old switch but not cut off power from outlets in bedroom?
thanks for sharing, i have to install a tipe of dimmer that looks like the one on the video, but i am working on detached lamp that i use in my bedside, i wonder if the two cables are the in fact one , that seems to be the case?...
Have dimmer to install, 14-2 wire, white to white, black to black plus ground, my question is the white wires indicate current with voltage tester, in your Video, no mention of white wires but could see them in box. Also wires from light to switch box, does black wire attach to dimmer and black wire from breaker become second wire on dimmer, if so all white stay connected in box with wire nut, is this the correct method, DONT want to trash $32.00 dimmer THX ERIC
@HouseImprovements
3 жыл бұрын
My forum is the best place for these discussions , please post your questions there and we can walk through it. www.house-improvements.com/forums/
Thank you man 🥂🇨🇦
I am new on channel , liked videos installations electric, I am electrician , am from brazil , congratulations liked channel .
Thanks
Aside from the 3 way wire, I’ve seen a wire screwed to the backside of the metal shell making it difficult to access and understand what wire goes where. I’m in the USA. Do you have a more comprehensive electrical video series that covers the various types of setups someone might encounter?
@HouseImprovements
6 жыл бұрын
This is our entire electrical playlist . kzread.info/dash/bejne/k6F2mNmMnpiynLQ.html We also have a forum where we can likely help you through your situation. www.house-improvements.com/forums/
My box has only one black wire and one white wire. Can I install dimmer switch on? Thanks
@HouseImprovements
3 жыл бұрын
Yes, you have a switch leg circuit. One of those wires (likely the black ) is the power feed, the other will take the power to the lights.
The black cables can be crossed?
What wire was the live wire
Can you use a house dimmer on a 12v car like to control a fan
The two black wires are both HOT, but one of them comes in from the power supply feed and the other one is outgoing. You didn't mention which of those two wires connect to which of the two poles on the dimmer switch. Because if you reversed them, wouldn't the dimmer work in opposite direction?
@jerrynorris1397
3 жыл бұрын
No
Thanks.
The black terminal is the line right ?
What l am confused about, is every video says there is two black wires, every time l ever changed out a standard light switch or any electrical outlet, theres always a white and black, obviously l need the white wire for power so where do l hook it up at?
@steviebeers2985
Жыл бұрын
White is not power
Yes how i try to install a single pole dimmer where a regular switch was install but when i check the wires there's three copper wire plus ground wire. The dimmer purchased has two black wire and ground wire. I try to out it without one of the copper wire and didn't work what did i do wrong?
@HouseImprovements
4 жыл бұрын
please post in our forum.www.house-improvements.com/forums/
hey i like your videos, when i have a dimmer switch do i need a special light bulb or can i use a regular bulb? when i turn on the switch that has a dimmer the light flickers and i will have to move the dimmer to make it stop but in minutes it will flicker again
@HouseImprovements
5 жыл бұрын
Some bulbs are not compatible , it will say on the package if they are dimmable.
The normal light bulb is easy, try LED bulbs + LED panels (eventually + wifi control + IR remote) :) I am solving several places at my flat and such there are several standards exists it´s really pain to solve that (and 3 wire cables are not enough - you need 4-5 wires in the cable)
Thanks bro
Which of the two wires is the hot wire? 🤔
@HouseImprovements
2 жыл бұрын
In the video it is the black wire coming from the bottom area of the box and attached to the bottom screw on the original switch. In your case with the old switch off check which wire has power with a multi meter tester. That will be your hot.
Thanks.👍
When you dimmed the light switch all the way down, that that means that the switch is off or it’s just dimming the light bulb?
@HouseImprovements
5 жыл бұрын
The light would usually be receiving a limited amount of power still with most dimmers that also have a separate on/off switch
@AREMPEE
5 жыл бұрын
HouseImprovements Is there a light switch out there that has a built in on/off switch that I could just leave to on switch and use the dimmer switch to dim the light bulb out? I asked bc, I have one outlet in the kitchen that when I turn off the light switch, the outlet is no longer receiving power and I have my water cooler dispenser plugged in to this outlet. Thanks!
I have a dimmer on a fan that does not have a pull chord with the three speeds. Anytime you turn down the fan speed from highest setting with the switch, you can hear the motor on the fan get louder. Is this something I can fix with a different dimmer switch?
@HouseImprovements
6 жыл бұрын
Actually I'm not sure you want to run that style of fan that way. Best to ask that question in my forum and the electricians there can maybe give you more insight on that. www.house-improvements.com/forums/
Nice one, in the video both the wires look black so how do you know which wire is live.
@HouseImprovements
6 жыл бұрын
You can test that with a volt meter or buzz stick when the power is on and the light switch is turned off.
@RTSFoto
6 жыл бұрын
Yes I realise that Shannon, I was mainly asking just in case some of your viewers may not know what to do mate. Hope you dont mind. Keep up the good work..
@rhdtv2002
6 жыл бұрын
Russell Swindlehurst can't you just look on the original switch to see which one was the positive?
@Wowzersdude-k5c
5 жыл бұрын
Which wire is live doesn't matter. Either black can go to either terminal screw. All you're doing with a single pole switch is breaking the circuit when it's off and completing the circuit when it's on. The switch itself doesn't care which screw the live wire is on. Of course, you'll want to turn off your breaker and then check that it's dead with a voltage tester before changing out a switch.
@esojrdz84
5 жыл бұрын
the one coming from the bottom of the box is your hot wire, the other wire from the top to the light is your switch leg
Are there any risks of the light bulb exploding when they use it for long time???
What is the name of the dimer company
Paytron
can you do one for a dimmer on a 3 way
@HouseImprovements
6 жыл бұрын
Subscribe and keep watching in late April for that one.
☆☆☆☆☆☆☆
You would have more visits if you speak Spanish and insert subtitles into Spanish. For example, look at Pitbull, Daddy Yankee, Enrique Iglesias or the most popular KZreadrs, they know that singing in Spanish is more profitable than doing it in English. Your knowledge would help many who do not want to leave our side of the river and we just want to be prepared. regards
Ok i have a question 4u so my bedroom has no overhead light but has a lightswitch but idk what its for but my husband installed recessed lights in ceiling and wants to change the old switch to a new dimming light switch but he wants to know how do u wire that new from old switch but not cut off power from outlets in bedroom?
@HouseImprovements
4 жыл бұрын
Our forum is the best place for questions and it is easy to use, please post your question there for a reply.www.house-improvements.com/forums/