*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts Plus, follow my *Vlog “TimesWithJames”:* kzread.info

@ianmidwinter6745

4 жыл бұрын

anyone who uses the stupid bath brackets is a mug . put 50mm by 25mm batten to support the underside edge of the bath ( all 3 sides ) then drop vertical batten to support from the batten to the floor. Does anyone know that a bath filled with water alone is the weight of 6 10 stone people ? approx 420kg ??? 1mm of movement after fitting = a leaking bath with a shower above. ESPECIALLY A PLASTIC BATH. FITTED TO A PLASTERBOARD WALL.

@Ubique799

Жыл бұрын

How high should the bath waste be out the wall 80mm

Fill the bath with water before silicon mate save movement in bath after.

The over the top scream while lifting the bath out was outstanding.

A fantastic, entertaining and very informative video. This will definitely help me when the time comes to fit my new bath next year. Thank you! 🛀 🙂👍

Used your video to change bath for the first time in flat I rent out and can safely say wouldn't of been able to do it to the standard and confidence without it. Thank you!

Very informative and very funny as usual. Keep up the bloody great work!

Thank you very much. I have struggled to install my bath but after watching this I should get it sorted now

Great video, very entertaining. Its interesting to see how you guys do it across the pond!

THX again for shpwing how simple YOU can fit a bath in just 15 min :D ... No in honesty it was really helpful to see how you change a bath and how to fit and level it right. THUMBS up and keep doing what you are doing !!!

Wicked video mate, love your work and banter loool

Wow i am just watched this years later. your info, advise, on how to is so good, mate i rate you

I don't think I've ever watched one of your videos without laughing out loud.

@plumberparts

10 жыл бұрын

Ha! Cheers dude!

This video helpful Plumbing Tips,Thanks for sharing!

thx buddy, do learn a lot from you keep going.cheers

Awesome video as usual! I've gotta get my bath in and sorted in the coming days so this has been super useful! Thanks!

@plumberparts

10 жыл бұрын

No worries mate! PP!

This guy is a legend. Love watching the videos. Very informative and makes me laugh every time!!

@plumberparts

8 жыл бұрын

+T&D Bricklaying services Cheers dude!

@alisonarmstrong5911

7 жыл бұрын

T&D Bricklaying and Building Services

Cheers for the info dude, brought a smile to my face too!

@plumberparts

9 жыл бұрын

No worries mate!

This is a very helpful tip, thank you

I subscribed to this channel a while back. Really enjoy your videos mate. The tutorials have really helped to decorate my dad's bathroom. Keep it up 😃

@plumberparts

9 жыл бұрын

Hi Scott, thanks for your comments mate. Pp!

Cheers for this! I'm about to start my plumbing course at college and this helps for a bit of knowledge before I go in!

@plumberparts

7 жыл бұрын

No worries mate! Sub here please>> kzread.info

Great vid, thanks. I need to remove and old cast iron bath, put a new subfloor in and turn the new bath around. Hopefully the waste pipe can be lengthened and angled ok. This vid will help.

very cool! helpful and entertaining.

You,my son...are a nutter! love it,great videos. Keep them coming. Cheers.

Subbed for the attitude

Amazing vid as ever . 😅

Great vid, very informative and in plan English. Thanks for the help ......

Great video thanks. Got to refit a bath next week so great to check out what is involved. Do you rate the Aqua Strap type seals that go under the tiles?

Very helpful, thank you.

this guy was very helpful thanks very much

i enjoy watching your videos, very informative and entertaining.. i like the knee pads as well.

I'll be putting this video to good use this afternoon with my bath

You make me laugh 😂 enjoy watching your videos 😍😂

Great and very informative

Excellent video, informative and enjoyable

@plumberparts

8 жыл бұрын

No worries and thanks!

Great helpful vids mate, Cheers

@plumberparts

9 жыл бұрын

Helm Hurst No worries!

Hi thanks for your great video. Could you please tell me what the correct hight adjustment for a bath should generally be? Thanks Chris

Hi mate. Thanks for the tips and tricks. Can you please advise on which rubber glue you use to seal the trap joints. Thanks

I have to say u done great job keep up the good work keep singing Hahaha

Hello mate your the best , I'm tailing and removing my old bathroom to new one , give me advice when I remove my old bath shill , I do the tailing and after to put my new bath or shill I do put the new bath and after the tailing thanks

Great how to, thanks 👍

Great video

Great vid! Any tips on securing the tub to a floor with UFH?

Thanks for sharing.

Your pretty strong, that’s very good for a plumber 👨‍🔧💪🏻☝🏼

Well done 👍

Nice one james, would you not recommend to cut your tap holes out before u do the final install to make it less awkward when drilling out the holes?

Haha nice video. Learnt something and made me laugh. thanks mate

@plumberparts

7 жыл бұрын

Thanks dude! Glad to help you out! SUBSCRIBE! ➡️👉 kzread.info 👈⬅️if you haven't already!

Hello pal, love your videos, In this video when you lowered a corner I wondered why you didn't alter the other corner insteaD

I'll be fitting a bath like this soon - thanks very much for posting such a useful vid. Hold tight and mind the wet poo roll.

Hi great videos is it the same way also for plumbing a cast iron bath

its a great job :) l work in this spiciality my question is: do you use the copper instead of plastic tubing and pax??

I love his singing. what a dude.

Cheers for the video. Very helpful. Did you screw down the wooden block into the floor, or just the leg into the block?

Thank you for your help this video was great. I did it myself and just watched your video while doing it.

Another quality video

@plumberparts

7 жыл бұрын

Cheers mate! Have a good one! SUBSCRIBE! ➡️👉 kzread.info if you haven't already!

Great video, singing is top notch as ever!

@plumberparts

10 жыл бұрын

Cheers!

Top vid pal, very informative. HOWEVER... I understand you perfectly, born and bred english from the north so english aint a prob YET why did i still find myself reading the grrr sub titles lol. thumbs up ;-)

Hi, Thanks for the vid, did you use the same glue to seal the plug hole as you did to glue the bath to the wall? If so what glue was it again? Is it okay to use on the threads of drainage pipes for extra seal? Thanks, Karl

FABsolutely LEGEND ...

Thanks for your tutorials, have been watching all your videos on plumbing tips, and it has given me the confidence to remove my sink and toilet. Embarking on the bath next.

brilliant :)

Hi is there a need of wood support or wood frame with this type of bath or are the clips sufficent enough to support the bath?

have you used any heat exchangers on a link up of a stove into an exsisting heating system if so what do you use ?

funny yet informative thanks

@plumberparts

8 жыл бұрын

+DarkArtsRecords1 Cheers dude! Sub here please>> kzread.info

Hi mate good clear fun video I put a new overflow /drain pipe in plus waste trap trap is ok but it's still leaking is it due to no sealant? We are looking into a new bathroom suite but in the mean time need that leak stopped on the plastic part the overflow pips attaches to there is a bigger lip on one end is that the end that faces upwards ? Any help is appreciated thanks

Hi bob here again have placed my bath pipes round the wall as per your vids neat job come to fitting new vanity unit in the guide leaflet it states if your fittings are like for like classed as none regulated no reg reguired as this is a p- shaped new bath taps now at the other end of bath as this is a new layout including the waist pipe would this alteration reguire approvel replacing your bath is not classed as a second bathroom is it ! any help please .

I get a lot of my diy tips from this guy and his really funny too

@plumberparts

7 жыл бұрын

Cheers mate! SUBSCRIBE! ➡️👉 kzread.info 👈⬅️ IF YOU HAVEN'T ALREADY! 😎

Great video as always PP, you became our first port of call during our whole bathroom revamp process. We have got the same gap between the end of the bath and the wall, like you have in this video - what shall we do with it? Cheers. Ruoxi

So after you've levelled the bath, you can then offer the panel up and find it doesn't fit. Alternatively you offer the panel up first and once you've got the correct height, then you can level the bath up. Saves a lot of messing about if you do it right from the start!

@doma5262

Жыл бұрын

Exactly 😅😅😅😂😂😂 or its custom panel time. Tbh tiled panels look decent

Great vid, well presented and made me chuckle too. Now I just have to fit the bath and keep the foul language down. Easier said than done.

Like the video. I notice you didn't do a wooden supporting frame for extra support. Is a wooden supporting frame over-engineering ?

lool the mj part cracked me up

A mahoooosive thumbs up for the lever valve with a nice long handle in those hard to reach and create any torque with finger areas! A small plastic handle valve and dare I saw it a flat head screw driver valve would be a nightmare in an emergency! Have you done a video before exclusively on installing a combination overflow and waste on a bath, I know it's kind of explained here but would love to see. Dedicated updated James version! Cheers, thumbs up

Hiya, we’re thinking of getting a vintage claw foot bath does the same apply

nice video - however how do you deal with walls which are not square? I am trying to fit a bath into a corner but it aint square. What do you recomend? Should I cut into the plaster?

Nice

What overflow do you use if the overflow hole is large (52mm) - same size as plug hole?

Hiya I want to put in a wet room however I have wooden joists and the shower waste pipe needs to go through the joist.can you drill nogging through a joist?

Hello. Liking your videos. Would like to ask an opinion if possible. Just about to fit my first pop up bath waste. It has some lovely thick rubber washers. Will these be enough for the plug side of the bath and just silicone under like you have in this video. Or is it best to silicone all parts. It looks like a good seal but don’t want any leaks. Any advice would be greatly appreciated 👍matt

could you do a video, how to install the waste on a free standing bath with a first floor install, newly qualified 6129. I am installing it at my own home not sure how to tackle the waste connection.

Cheers pal

Just wondering can you drill the tap holes before installing.Also what is the best size of hole saw to use. Thanks.

That bath usually has some plastic L brackets that screw round the wall..then the bath drops onto them...mind u there a pain...I often run a batten round the bath so it can't drop with weight of water...check out my bath install to see where them L brackets normal go, on a bath with wood...plus extra seal

Do you have any advice on securely connecting the trap to the waste underneath the bath - the plastic compression nut of the trap comes off the waste thread (also plastic) a bit too easily for my liking. Should I put some silicone on the thread of the bath waste before tightening the trap compression nut on ? cheers

Can i ask you why you didn`t baton the bath to the wall like you did in your other video of fitting a bath? Cheers

Hi what did you seal the plug and waste with? was it Silicon?

Great stuff mate, the only thing i would do differently would be getting the bath out the doors 😜

I have a large deep bath and I want to swap for a smaller one......How easy is it to do?

Is there any benefit in chasing into the wall before the install?

great videos have watched loads on here packed full of information, quick question what sealent are you using on the bath waste? does it matter what type?

@plumberparts

8 жыл бұрын

+TheDocksCreation I use either CT1 or standard silicone. PP!

Nice job matey my next stage in college now is actually installing the pipe work in for a bath have u done a vidoe on that yet ??

@plumberparts

9 жыл бұрын

ryan birmingham Hmmm not yet only the taps. I'll add it to the list!

Great thanks for the video excellent. I am tiling my bathroom floor, I wondered if its better to tile underneath the bath or is it not necessary? Thanks.

@paullancaster7066

3 жыл бұрын

There is no point it tiling under a bath IMO. Why do that??? :-)

How did you screw the feet in nearer to the back wall? I am about to put a bath in a 1690mm gap. I am using a 1700mm bath so I think chisel out a bit of plaster board. But once in place I can't see how I can get at the far feet

Awesome, mate! Informative and entertaining :) You've got to go to X factor! Because of the voice, obviously :)

@plumberparts

8 жыл бұрын

+mortishe Thanks dude!

Super

GREAT AND FUNNY YOUR A GOOD MAN

@plumberparts

8 жыл бұрын

CHEERS! PP!!!!

I have acquired two push-fit Flexi,s for connecting to the bath taps, they seem like good quality, But the two i am removing have the standard nut and olives one for the hot which is standard 22m copper, and the cold that has a 15mm to 22mm reducer on it , I look inside the Flexi, and there is only one sealing ring, they look all good but for some reason, being old school I have my doubts , can you possibly advise, me, Yes i do realize everyone is using Flexi, after all, they actually come connected on the monoblock basin tap,cheers anyway mate .

Hi what bathtub is that? Looks great nice and wide

Was looking for help with the taps, there's a white connection beneath mine that needs taking off and I have no idea how to do it

we have laid new floor boards so do we need our bath on wooden blocks?