HOPE YOU ENJOY THE AD AND SONG😂 Get 20% OFF + Free international shipping @manscaped with code *_PLUMBER_* at www.Manscaped.com! 🍺 *JOIN THE* *LIVESTREAM EVERY* THURSDAY! kzread.infojoin 🛠AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberparts

@rosewest5168

3 жыл бұрын

Hiya I was wondering do you have a video showing how to plumb in a tumble dryer please? Mines arrived today and its a heat pump with a water drawer but it has come with a drainage pipe ...I have an extra pipe under the sink which I think its supposed to go on ....the washing machine drainage is on one and there's a spare...I'm hoping for the tumble. Thank you!

@ashvanbro9329

3 жыл бұрын

Hi James I watched all these videos and there amazing mate 🙏

Thanks for the dust tip!!!

Of all the channels I follow, this one is actually very useful for us every day guys looking after property. It furthers our skills and knowledge, thus helping obviate the need to become a victim of the dreaded couldn't care less, in a mad rush, self taught plumber who is teaching himself on your job. As someone who can spot a tosser a mile away, I reckon you know your stuff. Thank you, please keep the videos coming.

@plumberparts

3 жыл бұрын

I am actually a tosser...

That was the very best advert I’ve ever seen on KZread ! 😂👌🏼 awesome work James !

@plumberparts

3 жыл бұрын

Ha! Cheers man. Go and check out the making of on @timeswithjames

@Cablesmith

3 жыл бұрын

@@plumberparts already on to it boss ! I watch your flying videos all the time 👌🏼

@plumberparts

3 жыл бұрын

@@Cablesmith ahhhh top lad!

Just finished installing my bathroom few weeks ago, and your other vids came in handy with that. Just need to tile the 2 walls and it will be finished. Then on to splitting the wet room down stairs into two rooms one a D/s WC and utility. Love that advert James!! Had me in stitches. Keep up the great work. Looking forward to next video.

Just remember to make sure your water is turned off. Son-in-law wanted to remove an isolated pipe in his flat which didn't seem to go anywhere. Pipe cutter in hand and ready to go, I asked if he was absolutely sure the pipe wasn't "live" and I just grabbed a spanner to check by loosening the connection. You guessed it, Whoosh.... so glad it was just loosened and not cut!!!

How satisfying was it those tiles coming off like that!!

🤣 that advert was mega.. now an even bigger Star Wars fan thanks to you James 🤦‍♂️

Great vid as always James. Loved the ad too.

Always an investigation dismantling other's work, great talk through! Writing this after doing a stealthy system drain & radiator removal (Saturday pre-8am), refilled & back on before she's out of bed...

Loving the fan from your #1 fan! Seriously, what a great idea. You always learn something from this channel 👏🏻. Great work, James. Looking forward to seeing the end result. Have a good weekend matey.

You were incredibly lucky with how easy that tile and lath demo was

James thanks for that Fan tip I have just chased all my rooms ready for my electrician dust everywhere 🤦🤦just 2 weeks to late 🤣🤣 love the channel fella...

@plumberparts

3 жыл бұрын

Ah gutted mate! Next time round eh!?

Another great project unfolding, I always work as clean as possible. A clean and tidy working environment calms my OCD. I look forward to the next episode in this series. Regards, Chris.

Love the song James. You have a nice musical voice. I am always amazed at how you can write a song for any job you do.

the my wife has been waiting for this day forever this is a marriage saving endeavor was amazing. clearly you would like to be a performer in an alternate universe, and i sincerely wish it for you. in this universe i love, and am grateful for, your plumbing genius. thank you.

Love all your videos. Your humour, singing hahaha. Brilliant!

Propper Job Jimmy! In the words of Orange Juice (80's band for all the younglings) "Rip it up and start again" Love the fan trick, defo gonna give that a go to keep the dust down and I know I keep banging on about it on the live stream, which is fooking amazing by the way but you need to ditch the Hardi Backer as it's heavy, brittle and a bugger to cut and swap for the Jaco Board, it's like Garlic bread, I've tasted it, it's the future!

Great video 👍

Production quality of your videos are insane. The songs, the craic, everything, I still don't know why you don't have millions of subs tbh, I'm about to rip an old house apart, but I watch these for the entertainment value XD

Just started my bathroom today, so very well timed tutorials 👍. Altho i broke the old hot gate valve in the closed position, extra job sunday 😒

LOVE the fan tip James - why have I never thought of that?! Maybe ‘cos I’m a joiner and not a plumber......🤦‍♂️!

What better way to demo a bath then jammin' to slayer, those air drums were on point 🤣

looking forward to see the end product James top work

Love the tip useing the fan to help with the dust. Think I will start doing that myself

Manacaped are everywhere! 😂

This is really useful to watch. Much better to take everything out, than faff around doing one thing at a time. A blank slate. Looking forward to seeing part 2 on Thursday with the #alearmy

Great video mate as always. Feel sorry for chewbacca though, that lady was obviously a furist

Thanks, mate! You are a good guy.

James, why don't you use tile backing board, its revalationary mate, about 4 million times easier to install than hardybacker. Listen to Roger Bisby...😬

another great video

The most entertaining advert I've ever seen on youtube ...lol

Doing exactly the same job these days. Looking forward for tips and ideas.

14:42 had me in absolute stiches! quality vid James, looking forward to the rest of the series! thanks for the excellent content

@plumberparts

3 жыл бұрын

Near death experience!

@AcheForWake

3 жыл бұрын

lol shocking how “easy” it was for the large part to come loose and drop

@Dhinsa90

3 жыл бұрын

@@plumberparts I liked it for that alone! 🤣🤣🤣

Perfect timing! I need someone to show me how to get the bath taps off.

Works better than expected

Them Tiles looked like they dropped on your foot lol. Grate vid mate and look forward Thursday Ale Army

@plumberparts

3 жыл бұрын

Yes mate! Didn't see you on the live last week mate. Hope all is well!

@gmeadowcroft84

3 жыл бұрын

Tough times mate, have to pick up every scrap of work i can at the moment. Need to think of my options. Maybe being forced to go self employed. I’m not sure yet

@chrisgunn121

3 жыл бұрын

@@gmeadowcroft84 Hope you're well dude, we all missed your presence at the Take the leap of faith and be your own Boss, make sure you have a solid reputation and build upon that, "your only as good as your last job" Work and build from personal recommendations and you'll never look back. Keep fighting the good fight

@gmeadowcroft84

3 жыл бұрын

@@chrisgunn121 thanks for the advice, it’s not necessarily as simple as that but really appreciate the advice. I did one of the quick spark courses and gained all my qualifications that way. I’m just very worried as I only have 12 months of experience. I’m just doing simple stuff at the moment but I’m looking at getting registered with competent body. Just not sure I should go out on my own yet as I know what people will say

That Wall Of render Sir rendered itself almost on top of the copper pipes! Hold Tight ;)

Great video. Nice treat at the end to hear some slayer. Bathroom wrecking music.

@plumberparts

3 жыл бұрын

Dittohead next week....

@miscman10000

3 жыл бұрын

@@plumberparts ha ha oh my word you'd have the room done in 5 mins listening that track! Love your vids so helpful.

7:48 "little bit of water never hurt anyone" Gizmo from the gremlins ......👁👄👁

Depend on the type of bath. If it has a lip you have to demo the tiles. Sometimes you can just lower the feet and pop it down and out.

great video james but i dont use hardibacker any more elements board is great to use and half the time to fit

@stephenporter5796

3 жыл бұрын

That's exactly what I was wondering.

Hi James great video, where your window ledge is my basin is just below that but when I went to change the basin I took it off the pedestal and there was just a massive gap behind the basin so basically the basin is resting on the pedestal and screwed into the tiles only how do I so this big gap out as I want to put a smaller basin and if I do there will be a gap around it. What I see is the outer bricks through the gap where as your wall is all bricked up under your window ledge

Using star wars trade marks in an ad hope Disney doesn’t see it. Was funny, but better have your lawyer on speed dial.

@plumberparts

3 жыл бұрын

I'd like to think they have bigger fish to fry!

I bet Emily rejoiced when the bathroom finally came up on the agenda after years. 😂 See you lads and lasses next week at the

@plumberparts

3 жыл бұрын

YEAH BOI! Glad to know you're enjoying the Ale Army bruv!

I'm curious as to why you're planning to insulate an internal wall? Just for noise?

That shower screen was sealed on the inside! Did it leak?

When one job turns into a thousand! I know, I’m on job 84. 😂😂😂

Listening to Slayer makes it much more fun 😃

@plumberparts

3 жыл бұрын

TOO RIGHT! Bathrooms! The meaning of pain! The way that I WANT YOU TO DIE!!!!

Great video, i am currently taking out my bathroom also and bought new bath taps however they have a 22mm shaft with 15mm male end. Issue i have is that my bath pipes are 22mm with isolator on end (also male end). I am struggling to find the link between the 2. Can anyone help please? Thanks

Would have loved to try the fan out of the window tip but my upvc window is jammed.

Lovely

Hi, working on my first bathroom. Doing some exploratory works on my bath it appears there are no shut off valves to the hot/cold feed to the bath and to the bar mixer. Is it a case of turning off the mains water supply from to stop cock and/or turning off the hot water feed using the gate valve from the unvented cylinder feed in the airing cupboard? Any help appreciated. Love the fan idea out the window!

You should make more adverts 😂😂😂😂

I thought the taps were a reindeer antlers design from the thumbnail 🤦🏻‍♂️

Unrelated question mate and no worries if you’re too busy to reply. Watched your wet room set up video the other day and still can’t figure out what u do to make water flow into the drain. Did the tiler make the tiles slope down into the drain?

@Nickbaldeagle02

3 жыл бұрын

Yes.

@plumberparts is it better to tile before or after fitting the bath as i have seen/read conflicting info

@Nickbaldeagle02

3 жыл бұрын

After.

Alright mate any tips on stopping water hammer? When my toilet stops filling I get a massive bang in the pipes. I have drained the water out the pipes but did nothing. Put a water arrestor to the fill valve, still the same, changed the fill valve, same bang, before I rip up the floor boards do you have any suggestions please?

I'm in the throws of taking on the bathroom/toilet - it's the only toilet in the house. I'm trying to do all I can before I take out bath and separate shower etc. I've taken of the tiles where I can and doing that has ruined the plasterboard and on one of the rendered walls the render has come adrift from the wall - so that will need to come down. Luckily I got an SDS drill for this job. I've been looking at these boards, I noticed you said you'll use 'Hardibacker' - what are your thoughts on the lighter weight boards like the Wedi type ones - much lighter and easier to cut than the cement boards. I was thinking of replacing plasterboard with these and possibly fix to the masonry wall as well. Loved the vid, keep 'em coming. Oh year, it's a real pain trying to get shot of old plasterboard in our area.

@Nickbaldeagle02

3 жыл бұрын

Wedi boards will do the job, Hardiebacker are the best. It's like the difference between a mini and a Rolls Royce. They both carry people. They both do the same thing.

Do you have a link for your watch strap please?

Can I ask why Hardibacker over some of the sexy panels, like abacus elements insulated waterproof tile boards? Cost, hype?

@Nickbaldeagle02

3 жыл бұрын

Hardiebacker are an established brand well known in the trade.

Those pipe slices seem to take a long time to cut through the pipe, does it take longer with those than the traditional rothenberger pipe slices?

@plumberparts

3 жыл бұрын

Got the rothy's too. Regardless of slice you'll always need to change the blades in the end.

You make much better content than the BBC, that's for sure

@plumberparts

3 жыл бұрын

Haha!

Can you please put up an affiliate link to your everyday medication supplier please? Will this work on my exes beard too? 😂

@plumberparts

3 жыл бұрын

Ha!

@Fran-fv6pf

3 жыл бұрын

@@plumberparts you do make me chuckle.. A lot 👍

@plumberparts

3 жыл бұрын

@@Fran-fv6pf That's probably all we've got left now!

“Stalin was still around then” 😂

When's the next video for the bathroom upgrade?

Good morning

@plumberparts

3 жыл бұрын

Morning!

All demo work should be done listening to Slayer.

@plumberparts

3 жыл бұрын

Yes mate!

Love Star Wars 😂🇦🇺

Ur not a bad singer mate

You’ve got the key you’ve got the secret.

@chrisgunn121

3 жыл бұрын

You're showing your age now David! Top Tune! Have you got any Disco Biscuits?????

@davezeraschi7936

3 жыл бұрын

@@chrisgunn121 no I’ve dropped them all 🤣 I’m coming up!

@chrisgunn121

3 жыл бұрын

@@davezeraschi7936 Hope you’ve not damaged them David 🧐 nothing worse than broken biscuits 😬🤬😁😂

Those isolation valves are a pain in the arse, they are either stuck and won’t turn or they turn and leak when you turn them off. 👎

What the heck are all those electrics above the toilet?

@plumberparts

3 жыл бұрын

Infrared toilet flush jobbies.

@robthomas7232

3 жыл бұрын

Good stuff as I have been putting off doing my bathroom for ages. Would be interested in your thoughts and water regs on fitting a bum gun style "bidet" hose/shower thingy. Asking for a friend ;-)

@Sarah-Collen

3 жыл бұрын

@@robthomas7232 @plumberparts James has a video out on bidets and theres more to come, check it out on youtube here. James am I right or is this a different bidet to the ones you are filming?

@robthomas7232

3 жыл бұрын

@@Sarah-Collen Thanks Sarah, I've checked out his Vitra video and although it looks an interesting design, its not really practical given the large hidden floating frame which would cover my bathroom window. Also I've never really been a fan of floating toilets as they just worry me. The ones I'm talking about are basically a simple shower style attachment and people fit them with one way valves but these still don't meet WRAS approval as they can still lead to back flow.

@Sarah-Collen

3 жыл бұрын

@@robthomas7232 Ah, I think I know the ones you are talking about. If James doesn’t reply I’ll ask him in the #Alearmy live on Thursday. Maybe he can do one as a comparison to the framed ones. @plumberparts

Slayer?

Angel of death!!!

Fu@#k the video advertising was best!

Surprise Surprise adverts,🙄🙄

@plumberparts

3 жыл бұрын

Scroll on mate! 😂

@jimmcgahon6961

3 жыл бұрын

I will😘

Slayer?