A quick video showing the basics of installing a backrack on a truck. This particular truck is a 2009 GMC Sierra 3500.
Жүктеу.....
Пікірлер: 36
@tripnfallshow4 ай бұрын
Great video. Straight to the point. No 20 minutes of filler talk.
@davidecampanello62278 жыл бұрын
Thanks for the video. Putting one on my F-250 Super Duty tomorrow. Your video was helpful.
@MassHardscaper
8 жыл бұрын
+Davide Campanello Glad I could help. Hope it goes well and thanks for watching!
@znovosad5557 жыл бұрын
Just installed one on my f150. Little Bit different stake post brackets but just as easy to install!
@nickjohnson97045 жыл бұрын
I bought a Back-Rack, took it apart, sandbalsted it, painted it a pretty metallic blue, and went to install it.... it's for a smaller sized truck >_ It still sort of fits, but the holes don't line up, so I'm going to make my own holes or just weld it... but then I'd have to fix the paint job again... Grumble!
@MFSINPSA4 жыл бұрын
Genius. I have to do this Immediately
@invisiblerevolution2 жыл бұрын
My SILLY ASS.... thought I'd have to drill holes in my truck bed. LoL
@markdolan72987 жыл бұрын
How did you mount the whelen mini light bar onto the backrack??
@SickBlu955 жыл бұрын
What brand of strobe light do you have in this video?
@michaelalluzio36934 жыл бұрын
What is the piece you used to put in the stake pockets?
@Mr.Beastforpresident5 жыл бұрын
Hello, I just need the installation kit. Do you have part#?
@manuelfernandez9322 Жыл бұрын
where did you buy those bolts? or what do you call them?
@rosaberg39639 жыл бұрын
How did you mount the light bar to the back rack? I have the same bar and just bought the back rack and have been thinking of how to install.
@MassHardscaper
9 жыл бұрын
Rosa Nettles We cut a piece of thin steel and attached the light bar to that. Then we drilled 2 holes thru the "bracket" we made and the back rack. Hope that helps!
@markgloverville
6 жыл бұрын
Backrack also makes brackets for mounting light bars and beacons. It’s cheaper to do it yourself though it may void the warranty if you drill holes (not sure).
@dcboy1129 жыл бұрын
I have the same lightbar for my plow truck it's the best ever
@MassHardscaper
9 жыл бұрын
nick zutantas It is a great lightbar for the price! We have one on our 1 ton dump truck that we use for plowing as well.
@rccrazy30
9 жыл бұрын
MassHardscaper44 same bar i put on my back rack. it was a pain to mount though i ended up having to cut the tabs off and drilled new holes but it worked out well. only part that sucks is i dont fit in the car wash anymore...by about 1/4 in check out my plowing videos
@znovosad555
9 жыл бұрын
Whelen century?
@MassHardscaper
9 жыл бұрын
rccrazy30 Guess you'll have to wash it yourself now haha and you've got some good videos! Keep em up!
@MassHardscaper
9 жыл бұрын
znovosad555 Yep thats exactly what it is.
@dcboy1129 жыл бұрын
What kind of wire do you use and we're can I buy it also what kind of switch do you use
@MassHardscaper
9 жыл бұрын
nick zutantas This truck actually has a light switch from the factory which is mounted near the dome lights in the cab. Because of this it had wire already in the roof so I did not have to buy any extra wire for this but automotive wire which you can buy at almost any automotive store. I would suggest getting multiple strand wire so your not running multiple single strands.
@barfpuker27324 ай бұрын
Anyone know where I can get those L bolts for my ford f250?
@LOBUNCHO3 жыл бұрын
Is there a way to prevent being stoled?
@Whatnow123
3 жыл бұрын
Weld the bolts maybe? You’d have to put some effort in to steal one of these
@BikeMoto1238 жыл бұрын
that light is that
@MassHardscaper
8 жыл бұрын
+BikeMoto123 It's a Whelen Century Mini.
@BikeMoto123
8 жыл бұрын
+MassHardscaper thanks do they sell one with out magnets
@MassHardscaper
8 жыл бұрын
+BikeMoto123 Yep. You can buy it either way. We don't use magnets on any of ours.
@TWDxKILL3R7 жыл бұрын
You can't put a toolbox on top of it..... the brackets look backwards...
@MassHardscaper
7 жыл бұрын
These aren't the toolbox brackets. They make longer square tube brackets for mounting tool boxes.
Пікірлер: 36
Great video. Straight to the point. No 20 minutes of filler talk.
Thanks for the video. Putting one on my F-250 Super Duty tomorrow. Your video was helpful.
@MassHardscaper
8 жыл бұрын
+Davide Campanello Glad I could help. Hope it goes well and thanks for watching!
Just installed one on my f150. Little Bit different stake post brackets but just as easy to install!
I bought a Back-Rack, took it apart, sandbalsted it, painted it a pretty metallic blue, and went to install it.... it's for a smaller sized truck >_ It still sort of fits, but the holes don't line up, so I'm going to make my own holes or just weld it... but then I'd have to fix the paint job again... Grumble!
Genius. I have to do this Immediately
My SILLY ASS.... thought I'd have to drill holes in my truck bed. LoL
How did you mount the whelen mini light bar onto the backrack??
What brand of strobe light do you have in this video?
What is the piece you used to put in the stake pockets?
Hello, I just need the installation kit. Do you have part#?
where did you buy those bolts? or what do you call them?
How did you mount the light bar to the back rack? I have the same bar and just bought the back rack and have been thinking of how to install.
@MassHardscaper
9 жыл бұрын
Rosa Nettles We cut a piece of thin steel and attached the light bar to that. Then we drilled 2 holes thru the "bracket" we made and the back rack. Hope that helps!
@markgloverville
6 жыл бұрын
Backrack also makes brackets for mounting light bars and beacons. It’s cheaper to do it yourself though it may void the warranty if you drill holes (not sure).
I have the same lightbar for my plow truck it's the best ever
@MassHardscaper
9 жыл бұрын
nick zutantas It is a great lightbar for the price! We have one on our 1 ton dump truck that we use for plowing as well.
@rccrazy30
9 жыл бұрын
MassHardscaper44 same bar i put on my back rack. it was a pain to mount though i ended up having to cut the tabs off and drilled new holes but it worked out well. only part that sucks is i dont fit in the car wash anymore...by about 1/4 in check out my plowing videos
@znovosad555
9 жыл бұрын
Whelen century?
@MassHardscaper
9 жыл бұрын
rccrazy30 Guess you'll have to wash it yourself now haha and you've got some good videos! Keep em up!
@MassHardscaper
9 жыл бұрын
znovosad555 Yep thats exactly what it is.
What kind of wire do you use and we're can I buy it also what kind of switch do you use
@MassHardscaper
9 жыл бұрын
nick zutantas This truck actually has a light switch from the factory which is mounted near the dome lights in the cab. Because of this it had wire already in the roof so I did not have to buy any extra wire for this but automotive wire which you can buy at almost any automotive store. I would suggest getting multiple strand wire so your not running multiple single strands.
Anyone know where I can get those L bolts for my ford f250?
Is there a way to prevent being stoled?
@Whatnow123
3 жыл бұрын
Weld the bolts maybe? You’d have to put some effort in to steal one of these
that light is that
@MassHardscaper
8 жыл бұрын
+BikeMoto123 It's a Whelen Century Mini.
@BikeMoto123
8 жыл бұрын
+MassHardscaper thanks do they sell one with out magnets
@MassHardscaper
8 жыл бұрын
+BikeMoto123 Yep. You can buy it either way. We don't use magnets on any of ours.
You can't put a toolbox on top of it..... the brackets look backwards...
@MassHardscaper
7 жыл бұрын
These aren't the toolbox brackets. They make longer square tube brackets for mounting tool boxes.
@TWDxKILL3R
7 жыл бұрын
MassHardscaper gotcha
Slower on the camera please. Vertigo plus!