How To Improve Blower GPU?
In this video I show how you can improve the Blower graphics card for your pc on the example of a video card from nvidia GTX 1080. Dell gpu blower
#diy #gold #pc #bild #howto #gpu # Blower
In this video I show how you can improve the Blower graphics card for your pc on the example of a video card from nvidia GTX 1080. Dell gpu blower
#diy #gold #pc #bild #howto #gpu # Blower
Пікірлер: 43
What is blud doing 💀💀💀
On eBay you’re held accountable. Don’t want neutral or negative feedback for seller. That’s a death sentence!
I bought a 1080 Ti blower card and replaced the fan with a Raijintek Morpheus II cooler solution. Works great and keeps the card very cool - probably 20C cooler than the single fan.
good video, but your explanation of the undervolting was pretty lacking
That part where you noticed the thermal pads and the screams of rage....I laughed so hard. Thanks for the excellent vid
Man, I can’t tell you how much I hate it when I’m working on something, and I have everything I need to take it apart and 1 singular screw strips causing me to have to fight it till it comes out. What I use to get stripped screws out is either the next size higher, a triangle bit or flat head, torx screw bits may also work for getting stripped screws out also if you don’t want to saw it out. Good video :)
If it's satire, you got me pretty good lol. If not, please stop spreading misinformation
Dell gets them from MSI for their XPS and Alienware computers. The Alienware ones have a backplate while the XPS ones do not. As far as I can tell it doesn't really matter much.
omg. that was not smoothe. "mirror finish" but its' just a series of visible scratches and you can't see anything on the surface. yikes
Great video
The comedy value of this video is as golden as that shroud.
7:00
I used to design sticker for blower gpu shroud, i think its looks cool
Can you do the MSI RX Vega 56 Air Boost 8Gb OC card?
....Just brilliant ! 10/10
The number of tiny, time-wasting F-ups I've made fiddling with GPUs is staggering; I felt your pain
Such a good video
Surprisingly high quality video for a channel with so less subscribers.
Next time you paint a GPU shroud, put it in the over for 30 mins, @60c. This will cure the paint to the touch. In a few days, it will be set.
You could just put there Arctic Accelero Extreme :D Just arrived some used 2080 Ti to me and guy sent me that Arctic cooler too. But after undervolting and some playing in Afterburner the temps are max 85 on hotspot with blower, so no use for Acellero yet.