This is awesome!! We're glad that you were able to get the job done with your Mach 1 Hot Tapping Machine!

@BidwellCanyonFarm

3 ай бұрын

Me too! Thanks for making a great product! It really is one of those tools that if you need it you NEED it!

Another tip. If you use both tephlon tape and pipe dope the tape goes on first then the pipe dope on top of the tape. This way the dope can do what its supposed to and fill any small voids. When you do it backwards the dope is only under the tape on one fitting and not filling voids on both, the tape is trying to do the job of the dope when you do it the way you did. 😁👍

@BidwellCanyonFarm

4 ай бұрын

Thanks for all the tips! Sounds like you have been plumbing for a while!

@BBQandStreetCars

4 ай бұрын

@@BidwellCanyonFarm not too long. Almost 17 yrs now. Loved the video, I'm definitely gonna keep watching

Depending on your situation, that tap could be priceless. Very unique and handy tool.

@BidwellCanyonFarm

9 ай бұрын

Thanks Rick, I can see it paying for itself in about 3 years, if I score some other hot tap jobs.

Hey Brian, nice work! I would say you are now in the rental business. I'm sure a few folks in Surprise Valley can use it.

@BidwellCanyonFarm

9 ай бұрын

Hi Ken! I would have to agree with you! Been thinking about that for awhile now. Seems like it could be a pretty good way to make some money back on all these spendy tools. Best!

good video!

@BidwellCanyonFarm

9 ай бұрын

Thanks partner!

Great tap. Even if you need it once its cheaper than paying me to do it.

@BidwellCanyonFarm

Ай бұрын

Thanks! It is a pretty special tool. When you need it, you need it bad!🤙

What about the metal shavings in the tap that can and probably get into the pipe? Ok, I see how it saved the shavings. Definitely a neat system and well thought through.

@BidwellCanyonFarm

9 ай бұрын

I think the leaky fitting (I kept complaining about) actually helps by allowing water pressure from the main line to keep shavings from entering the system.

@BBQandStreetCars

4 ай бұрын

Yes the shavings go into the pipe, there's no way around it when hot tapping

Which is the best bore on top are on the side

@BidwellCanyonFarm

2 ай бұрын

Hi Earl, I am not sure which is best. Typically, I see them on the top portion of the pipe but not right out of the top center. Slightly off center toward the direction of the water line which allows the water pipe a strain relief bend that helps with backfilling and gives a little pressure relief to the fittings. Hope this helps!

@earlmatthews1295

2 ай бұрын

Thanks so much for responding. So in your experience which one work best for you

@earlmatthews1295

2 ай бұрын

Cause mine is on top and i have ro used a water pump yo get water if not no water for me

@kvnmccallister1190

Ай бұрын

45° angle up is usually the best. top taps get hit while digging, but 45° still allows air that may be in the main to get out

A tip from a licensed plumber. Typically shark bite fittings are for temporary repair because it seals with a rubber oring and rubber will go bad and it will 100% leak one day and need to keep being repaired if you keep using shark bites. If you have the tool it's best to expand or crimp the fittings on, depending on what type of PEX pipe you're using. And those fittings are extremely less likely to ever leak if done correctly. But I doubt you have the tool that's why you're using shark bites. But IDK just a guess. Awesome video though. 👍

@BidwellCanyonFarm

4 ай бұрын

Sounds like I need to invest in more tools! Thanks for the comments!

@dwaynesykes694

6 сағат бұрын

Copper press fittings (e.g. Viega ProPress, MegaPress) also rely on o-rings. They've been used successfully in Europe since the 1970's.

Would you be interested in selling for a reasonable price?

@BidwellCanyonFarm

6 ай бұрын

What is a reasonable price?

Wow. For $2000 it should've came with the drill, battery and charger. Thats crazy this company is doing this to their consumers. SMH

@BidwellCanyonFarm

4 ай бұрын

Yeah, you would think they would hook it up for that price!

Poly way too hot

@BidwellCanyonFarm

7 ай бұрын

Yeah, i think i got her a lil hotsy-totsy. What do you look for when you heat your poly? Thanks!

@markgeater3036

7 ай бұрын

We use mostly copper here in northern Illinois,but occasionally when we use poly I just muscle it on with some lube

@BBQandStreetCars

4 ай бұрын

Yes some lube and some muscle works for me most of the time, but sometimes I gotta bust out the torch and warm up the pipe to make it barely soft enough to flex. If it's smoking you're using too much heat. It should only take about 10sec (give or take depending on the temperature outside) until it's soft enough to press on easily

dont try at home

@BidwellCanyonFarm

7 күн бұрын

Haha, yeah. It is a bit scary.