HOW TO GLUE PULL A CAR DENT! | Full Tutorial On Hot Glue | PDR | GPR
Автокөліктер мен көлік құралдары
In this video I show You how to glue pull a vehicle dent.
Full in-depth instructions using the Keco 6C process to ensure the optimum performance in Hot Glue Pulling
The damage is on a brand new Mercedes A35 AMG and the dent is on the passenger door, I’d say a minor dent BUT very obvious and definitely not wanted on this beautiful vehicle.
Not wanting to have the damage repaired and painted our customer contacted us for a Paintless repair and if you watch the video you’ll see how it went!
The equipment I’m using is the Keco level 2E system and I’m using the finesse side of the system to carefully tweak the damage out.
Join this channel to get access to perks:
/ @dentremover01
-------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
⭐️
We are offering Glue pulling courses beginner and advanced. Please contact us through
www.dent-remover.co.uk
Do you want to try Glue pulling yourself?, Here's some affiliate links for tools on Amazon.
*Car Dent Glue Pull Repairing Tools. amzn.to/3ZoZUUP
*99% Isopropryl for removing the glue. amzn.to/3kvKAHb
*Circular inspection board for quality control. amzn.to/3Izzucg
*We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
www.blackplaguepdr.com/discou...
------ Chapters-----
00:00 intro
00:49 The damage explained
02:14 Keco 6C process
07:16 Starting the repair
11:46 Knocking down the highs
13:42 Dent analysis
14:08 Fix the crowns
19:10 How much this Repair COSTS ££
21:13 Using precision tabs
26:09 Wrapping the repair up
26:32 Look at the amazing results
27:12 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Keco tools used can be purchased from
kecotabs.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin
#DentRemoverBeverley #gpr #PaintlessDentRemoval #youtube #EastSide #pdr #kecouk #camauto #keco #ThoseDentGuys #automechanika #DentRepair #martinsadler #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent
Пікірлер: 94
You really excel on explaining PBR work I took some courses through Denttime San Diego, but I love the way you present everything and the pull tower you explain everything! Keep up the great work Dennis from Florida
Excellent vid and presentation. Quality PDR like this is an art form. A great skilled trade for young people to consider getting into, there will always be a need for this service, doesn't matter if cars are gas powered, electric, flying they will always get dents.
@kylemcweeny878
3 ай бұрын
I couldent agree more
Great Glue Pull Tutorial Martin! Very informative, well explained throughout and easy to follow instructions. Loving the multiple camera angles and attention to detail. Top work from a great Man
@dentremover01
Жыл бұрын
Thanks Tom I’m very happy you enjoyed it!! Il be watching your new glue repair video later today once back home. Hope your recovering well?
@dentremover01
Жыл бұрын
Thanks Tom I’m very happy you enjoyed it!! Il be watching your new glue repair video later today once back home. Hope your recovering well?
Excellent Repair Video, thanks for sharing your knowledge with the PDR world, much appreciated.
@dentremover01
Жыл бұрын
Thank you Victor for your kind comment
Great demo and tutorial! Thanks Martin!
A great in depth tutorial Martin and as always a flawless repair! 👍 I'm still saving up to buy some Keco gear, they have some great stuff! 🙏🙏🙏
@dentremover01
Жыл бұрын
Thanks Jake!! If you do a lot of glue pulling then it’s great having the latest equipment
Great video Martin!
Great job martin as always mate 👍
Perfect camera angle 😊😊
Great Job very knowledgeable. Thank you
@dentremover01
7 ай бұрын
You are welcome!🙏
Glassed it out!!!! Nice job as usual!
extremely professional
Awesome videos got my subscription
This fellow should be a narrator. Excellent explanations.
@dentremover01
Жыл бұрын
Thanks Mike, that comment gives me a lot of confidence because I feel I struggle with this bit! Thank you 🙌🏼
@Jotomoz
Жыл бұрын
@@dentremover01 thnx I got a car here with small bonnet dent and side door dent round type looking to do some dent pulling came across your videos
Great video Martin showing the benefits of the 6 C process. The price was a fair quote, imagine how much more Mercedes would of charged to fill and paint it?!
Awesome! Thanks so much for this!
@dentremover01
4 ай бұрын
Thanks for watching!
Maravilloso tutorial, gracias compañero. Una pregunta. Cuantos minutos sueles tardar para un golpe como este del vídeo? Gracias. Buen video👍👍
thank you for the bloody nice tutorial 👍
@dentremover01
7 ай бұрын
Thank you Sam ☺️
Fantastic videos, I've watched loaded of your videos now and it has inspired me to buy my own kit. Could I ask what glue you use please? Many thanks in advance👍
Top masterclass, Martin! 🔝👏👏
👍👍👍👍 ottimo lavoro.
Master at his trade!
Thanks for sharing Martin...P.s...I'm changing my cloths to green lol.
@dentremover01
Жыл бұрын
Hahaha they’re the best!
Anything specific to look for in a PDR school. Or things to watch out for..
Hey, great video! What is the avarage price for painting one part UK?
Good job.
@dentremover01
5 ай бұрын
Thank you! Cheers!
Привет Мартин! Хорошая работа и хороший обзор нового инструмента. Очень здорово, что ты показал технологию проведения работ от самого производителя инструмента, это даёт преимущество в понимании, что и когда делать. Снимай и выкладывай больше видео - это полезно и необходимо.
@dentremover01
Жыл бұрын
Thank you! I’m glad you enjoyed the video and yes this kit is 100% the ultimate glue kit and very easy to use when using the 6c process. I’m working on another video of my time in the USA at the Dent show. Hoping to have it live asap for you. Did the subtitles work ok on the video?
@dentremover01
Жыл бұрын
Спасибо! Я рад, что вам понравилось видео, и да, этот набор на 100% лучший набор для склеивания и очень прост в использовании при использовании процесса 6c. Я работаю над другим видео моего пребывания в США на шоу Dent. Надеюсь, что он будет жить как можно скорее для вас. Субтитры нормально работали на видео?
@LxGL82
Жыл бұрын
@@dentremover01 Да, субтитры отлично работают, всё очень хорошо понятно! ))
Hello, nice to meet you. I'm curious about one thing, where can I buy the glue you use?
Nicely edited and completely focused..😂
@dentremover01
Жыл бұрын
Not fiesta! Focused! Ha thanks Andrew!
Fascinating. How do you get the glue tab offf the panel?
@dentremover01
Жыл бұрын
Hi Clive, I explain the full procedure in the video. We use isopropyl to remove the glue !
Great job ! but quite expensive for a couple of hours work, im sure that kind of small repair would be that price seeing that you wouldnt need to blow in outer panels?
@dentremover01
24 күн бұрын
Yes exactly. It takes years of practice and a lot of investment in the tools to be able to carry out a repair like this. Your not paying for the 1hour that it took, your paying for the 20 years experience I regularly go to Bodyshops to magic dents out for them, while they are filling and repainting jobs I can fix within a few hours. They cost more because of the labour, parts, paint and business costs. It’s not fair to say (I know you didn’t btw) that the PDR person is too expensive because they are literally magic-ing the damage out and keeping your vehicle original I don’t think you can out a price on such a service Thank you for your good comment
How would you proceed with a similar dent but the paint has been chipped right in the middle?
Bonjour à quelle température régler vous votre pistolet à colle ?
A brand new car, in Black (the worst colour for an invisible repair) and there's no sign of the damage ever being there. Very impressive ! Very professional, latest tools, combined with your extremely skillful application makes this job perfect. Customer satisfaction is paramount and I'm sure they were happy. Even with my critical eyes...that's a damn good job. Was the total price inclusive of VAT ? AND....did you check the internal bonding between the brace and the door skin, or was this not required ? Well done.
@dentremover01
Жыл бұрын
Hi John thanks for your kind feedback 🙌🏼 The price with vat was mentioned when I estimated it and initially I didn’t check what the brace was like I only dropped a tool inside which was obstructed by the brace. The bonding was still intact once the repair was finished. I’m very happy you enjoyed the repair video Thanks Martin
@dentremover01
Жыл бұрын
Hi John thanks for your kind feedback 🙌🏼 The price with vat was mentioned when I estimated it and initially I didn’t check what the brace was like I only dropped a tool inside which was obstructed by the brace. The bonding was still intact once the repair was finished. I’m very happy you enjoyed the repair video Thanks Martin
Hi great video,have you being doing pdr long,did you train with keco
@dentremover01
Жыл бұрын
Thanks! I’ve being glue pulling and repairing dents since 2006, I self taught 🙌🏼
Brilliant work 👏🏾you used only cam auto glue?👍🏽
@dentremover01
4 ай бұрын
Thank you. Yes I think so if it was clear. The green stuff I use is brazillian ninja glue
Cool system Martin do you sell any of this stuff?
@dentremover01
Жыл бұрын
Hi Spencer. I can only direct you to the products.
I truly appreciate how precise and perfectionist you are approaching your each job, no matter how small or big they may be. I believe $350 would also be a fair price for a PDR work here in US as well! Thanks.👍🏻
@supercharged2414
Жыл бұрын
Totally agree. Maybe less in the US depending on source. I was guessing $250 which is still about $100 an hour. Plus traveling time. Body shop labor is only $45 an hour now which I think is pitiful. Then the shop owner gets half of that. PDR can be quite profitable if you are good and fast.
@sran9492
5 ай бұрын
This is unbeliavable in my country they would charge you 350$ for respraying the whole hood and two fenders/quater panels
@stephen1774
25 күн бұрын
In the USA ,the respray never matches exactly and goes on the carfax and drops the value of the vehicle, plus the bonds is bad.
Where did you get the foam with tabs on it? Is it a kit or just an accumulation you put together?
@dentremover01
4 ай бұрын
Yes that’s right. It’s part of a kit
Hi mate, where are you located? thanks
Excellent work Martin your standards are next level, but I also miss the old school videos of rolling out the cart from the little van on the streets Haha 🤣but that's just me 👍🦘🇬🇧
@dentremover01
Жыл бұрын
Hey Bill! I can certainly make more of those vids if you want!! I prefer to be indoors these days! I have a coffee machine and a kettle! Hope your well mate 🙌🏼
@billramsey800
Жыл бұрын
@@dentremover01I'm good thanks, stick to the workshop it's been well earned 😎
I’m confused, why is his temperature readings that low? 17 degrees Fahrenheit and heats it up to 50.
@dentremover01
8 ай бұрын
Sorry it’s degrees C
How can I reach out to you directly for some advice on a dent?
@dentremover01
Жыл бұрын
Hi Kevin. What’s up?
@kevinclynick9238
Жыл бұрын
@@dentremover01 could I sent you a pic of a dent for advice on how to tackle it?
Where CAN we get the 6c list
@dentremover01
7 ай бұрын
Keco uk website/6cprocess
What glue is it, silicone?
@dentremover01
11 ай бұрын
Hi Aaron. It’s hot melt glue like DIY glue
@fabemoleo7
11 ай бұрын
@@dentremover01 thank you, an excellent job you do
How can I get a Kiko system starter kit
@dentremover01
10 ай бұрын
Www.keco tabs.Co.uk
Pounds to $ that's 380 for a couple hours not bad at all!!
@dentremover01
23 күн бұрын
Thank you. Barely pass the bills that one alone
HELLO MARTIN, BEAUTY MATE AS ALWAYS! TO CUSTOMERS, MARTIN IS A MULTI DECADE TECH AND MAKES THIS LOOK EASY! Please understand that he is showing established PDR techs how to GPR properly. Here in The States I see, a couple of times a week now, where someone bought that $100-$150+ kit from Amazon or even the auto parts store now and try this instead of (before) calling a professional. It will cost more because we have to put it as close to the original damage as possible first,it most likely won’t have as good an outcome and then add the money wasted on the cheap made in China crap. So please avoid all this and go to a professional. Diminished value from a painted panel on a nice car is a scam here. ❤
@dentremover01
Жыл бұрын
Thank you Tommy! 🙌🏼 very kind of you to say and I’m just showing the world what we do 😊 your right about the DIY kits unless you have experience then please don’t try this unless your absolutely sure. It will be better allround to just call a professional and if your in Tampa 🇺🇸 then Call this Guy DingKing 👑 he’s an awesome guy! xx
👍👍👍👍👍
@dentremover01
6 күн бұрын
Thanks
Whose thats music playing?
@dentremover01
7 ай бұрын
Oh I don’t know!
@blakemccreery864
7 ай бұрын
@@dentremover01 well fyckin hell
How can I get your email .?
He says 50 degrees f but his video say celsius
@dentremover01
Ай бұрын
I shall check but I’m 99 % sure I didn’t Because we don’t use F in the uk