Get 70% off at Huusk: huusk.club/Mattswork

@allaroundtheworld4474

Жыл бұрын

You are so creative, very beautiful masterpiece! I hope this video will have more viewers. So nice! I ordered a knife from your link too! Thanks.

@MattsWoodworks

Жыл бұрын

@@allaroundtheworld4474 awesome to hear! Thank you for the kind words 🤝🙌🏻

@gracewalker8035

Жыл бұрын

Amazing video content you have. This knife looks like it’s made of high quality blade. Interesting!

@g_albert

Жыл бұрын

Incredibly nice video to watch, such an informative one! I like the craftmanship on your woodworks. That knife on your ad, it’s uniquely beautiful too!

110% effort yields 1000% results.

@MattsWoodworks

Жыл бұрын

🤝

Im 84, so i doubt ill ever progress this far. But that was a great training video with an excellent presentation. Cam's right! You're great. Love this table

@1timken

4 ай бұрын

Never give up. I am 83 and just finished an epoxy river, board room table, 3-piece 26 ft. long. clear resin on pecan wood rimed with walnut with walnut legs. I can so can you my friend

This really helped me with understanding the polishing and finishing part for the wood and the epoxy I was having a hard time figuring that out

Great tutorial for someone preparing to do black

@MattsWoodworks

Жыл бұрын

Thanks Jeremy!

Happy People need to be sitting around this beauty at a bar. It's Art Up Close!!

This would look really good as the tabletop for a sideboard table.

@MattsWoodworks

Жыл бұрын

I kinda agree, thank you for the feedback!

Very very impressive with that black epoxy! Well done!

@MattsWoodworks

Жыл бұрын

Thank you, much appreciated Shannon!

Thats amazing. Love the glassy look on the black epoxy.

@MattsWoodworks

Жыл бұрын

Thanks!!

Hanging on a wall would be awesome. Having seen the video of the $65,000 table before this one I would hate to see that gloss black get scratched. It would look awesome hung vertically in a room with a high ceiling. I was typing this right after you asked for ideas and it looks like you had the same idea. I don’t know what you would have to do to mount it to a wall but it looks great just leaning against the wall. What a gorgeous piece! The black is stunning.😊

Great job polishing that epoxy

Well chosen satin finish, lovely finished piece!

@MattsWoodworks

Жыл бұрын

Thank you very much Scott

Thank you for making this video! It was very helpful, I’ve been looking for a tutorial on how to get high gloss on the resin but keep the wood satin. Looks great!

@MattsWoodworks

Жыл бұрын

My pleasure!

Great job. I did this on a small knife board I made and it was a pain but turned out cool.

@MattsWoodworks

Жыл бұрын

Definitely time consuming! Haha right on!

Excellent video and your car detailing experience shows.

Looks fantastic. Will look great whatever it ends up being. Wall art might be the best. Would be a beautiful table, but you know it’s going to get a scratch or two.

@MattsWoodworks

Жыл бұрын

Yea I agree, definitely will get scratched as a table, would love to see it hung on a wall!

I think it would look amazing as a 45 degree angle wall art piece

@MattsWoodworks

Жыл бұрын

Ooooo I kinda like that idea! 🤝

Great project Matt, especially like the tips on getting the resin to a high gloss. I think would make a stunning wall art piece

@MattsWoodworks

Жыл бұрын

Thank you David!

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@MattsWoodworks

Жыл бұрын

Thank you!

Stunning!

Awesome Table Brother!

@MattsWoodworks

Жыл бұрын

Thanks!

Thank you! Great work and awesome video explaining your process.

That is beautiful, I'm just about to sand-polish my first ever river table and this was a godsend! Would be a sick bartop

Beautiful work

Beautiful, great job.

@MattsWoodworks

Жыл бұрын

Thank you!

Thanks - I’ve been unhappy with the glassyness of resin over my entire project, so have been considering doing a oil/glassy type of thing for my project. Good to know that it works out well. As for your question, I personally would only hang it on the wall if you had made the black a bit more translucent and fix a light strip to the back. Now that would be a show piece

That’s a piece of art

Wow great work and thanks for this video great help and tips

I think it would be great as a high bar table with some stools and chunky wood legs and fixed to a wall with some floating shelf brackets

I have 2 Huusk knives and just gave my Grandson one last weekend. Quality.

Epic job once again

very nice, that took a lot of patience

Would make a dope ass back yard bar table

Stellar work!!!!

@MattsWoodworks

Жыл бұрын

Thanks!

Awesome piece. Just wondering why you didn't seal the wood with Rubio first and then buff out the epoxy? I would seem like that would have saved you the trouble of that painstaking tape up.

That would look awesome on the wall with my MCM furniture

@MattsWoodworks

Жыл бұрын

Sweet!

I’d love to see that as a table, perhaps in along entry hall.

THIS is how it is supposed to look!

@MattsWoodworks

Жыл бұрын

Thank you much Tyjerk!

BEAUTIFUL

That would look amazing as a horizontal wall piece on my lounge wall. 🇬🇧❤🇬🇧

It looks great! I'm thinking of doing a thinner version for wall art. That stuff's expensive, you can't do to many without selling some..:)

@MattsWoodworks

Жыл бұрын

Agree! Do it!

@whatsupwithsteve

Жыл бұрын

@@MattsWoodworks Ok I'll keep ya posted..:)

I like wood wall art , it’s a lot of what I do , nothing like this though , looks awesome 😎👍

@MattsWoodworks

Жыл бұрын

Rock on, thanks Tim! Ill check out yours!

Spectacular Matt! Forgive me if this is redundant, but do you think I could use my RO 150 for the buffing portion as opposed to buying the Dewalt DA buffer?

Matt I’ve always rated your polishing skills .you and positive couple are on different levels .im actually at a level now where i can get it bang on clear high gloss shine but it does make me laugh when I see people sand up to 320 and throw a load of osmo or odies oil over some pigmented epoxy and call it a day lol 😂and then sell it 😮 But yh man that was well clear perfect job dude .huge breakfast bar I would say would look cool on that piece

Beautiful

Hey, I love this as a table. I saw the listing on eBay ended with reserve not met, which is crazy to me since it’s awesome. My husband and I just moved to a new house and I know exactly where I’d put it! Is it listed for sale elsewhere?

Hey Matt, really awesome stuff and thanks for sharing with us. I have a question about your microfiber towels. Do you wash and reuse them or throw them away?

Great Work...Needs a much Larger Price tag!!!

@MattsWoodworks

Жыл бұрын

Unfortunately I’m new to eBay so it won’t let me list it for much. 🥴 thank you!

Do you happen to have a list of the products used in this video? Awesome work!!

Would look great over my couch or vertically on a different wall

@MattsWoodworks

Жыл бұрын

Right on!

Matt, just saw your channel and subscribed. Where did you get your metal/copper/pewter colored logos I saw on your cutting boards made? Thanks

Think best think would be a hihj top breakfast bar style table or kick ass waterfall both side coffee table.y opinion. Looks amazing though Sheen's banging!🏴󠁧󠁢󠁳󠁣󠁴󠁿👍 Wish could afford it or even the resin to make something like it.

@MattsWoodworks

Жыл бұрын

Thank you for your feedback!

If you sand to 5k grit, then use a 1500 cut polish, how doesn't that add more scratches being a more coarse grit? Also, I always thought the wool buffing pads were to remove any remaining polish?? Isn't the wool pad always the last step and the black, green, yellow come before it?

Epoxy is a constant state of "I made a huge mistake and should have known better",, I guess that's what experience is all about

@MattsWoodworks

Жыл бұрын

Totally, and trust me I definitely don’t want to use it in every project. I try to disperse my portfolio of work as best as I can :)

I like it a lot. If used as a coffee table the epoxy is bound to pick up scratches though the ceramic will help. How durable at avoiding scratches and how do you maintain once scratches start to appear?

@MattsWoodworks

Жыл бұрын

It would definitely get scratched as a coffee table, I was thinking behind a sofa for less use and wear and tear.

@frederickgilbert6914

Жыл бұрын

@@MattsWoodworks Super thankful for the reply. Thanks so much. Do you recommend a wipe on Poly as a better alternative? Made one river with Odie's and another with Rubio's + ceramic coat. iI careful no scratches on either but if not...then scratches...Is a wipe-on poly a "better" alternative? KZread "rabbit holes" are not consistent but your videos seem to be well informed so curious on your opinion on this. Thanks for any helpful comments. Thanks from Singapore

What's the negative of hardness from the Shore D being less? I've never used that device and wondering if I should start.

Great job man. Would be great to know where to get the equivalent to the 3M perfect it system in Canada, crazy costs to import it from the US

@MattsWoodworks

Жыл бұрын

Dang! Really? I’ll look into it!

Honestly I would have got that into multiple tables. Looks absolutely stunning though.

Do another panel and mount them both as front entrance doors, a left and a right opening pair.

Where do you get that durometer?

I have a question if you don’t mind . I sanded a resin table all the way to 5000, and buffed it with wool pads with meguinar 105 and mirror glaze 2 . It’s super shiny and beautiful but when the light hits the top there are minor scratches how can I fix it

@maykan438

6 ай бұрын

I’m trying to see if I can send a pic

That’s a bar top…👍🏻

I'm a year late but great video sir 👍

Cam from Blacktail sent me.

I can not seem to get a clear glass finish when using epoxy. I'm not sure what I'm doing wrong.

What release agent do you use please

Are you worried about warping? For it being a longer piece. Love it and I’m not talented enough to try this.

@MattsWoodworks

Жыл бұрын

I’m not, it should be just fine, took all the proper steps finishing out both sides etc

@sbpboyd

Жыл бұрын

I really want to work with Mappa Burl but it’s such a soft wood it would be an expensive mistake if I screwed it up. But I was told to go after pressure and learn from mistakes. Love your projects and love your attention to details. Black tail studios turned me on to your KZread channel. Keep up the amazing projects.

@MattsWoodworks

Жыл бұрын

@@sbpboyd thank you man! Yea it’s definitely soft, I think a good idea for this wood would be to to use a penetrating epoxy first to stabilize and harden it. It limits your stain color choice but if you’re using a clear or natural finish it will work great. I did it on a redwood table on my channel and it was hard as a rock!

Cut it in half for 2x coffee tables?

@MattsWoodworks

Жыл бұрын

Not a bad idea!

Table for suuuuure

I think this beautiful beautiful table would be wonderful as a kitchen bar oh how gorgeous it would be if you could have the bar stools the same the same color with the black resin oh my goodness that would that would really cost somebody's anyway that's

Either or. The wall art would do it way more justice and keep it from scratching.

@MattsWoodworks

Жыл бұрын

I agree, the gloss black will get hammered as a table for sure

@thebobloblawshow8832

Жыл бұрын

@@MattsWoodworks really is a stunning piece. I’m just getting into it as a hobby and wall art is a cool market for these beautiful creations. Cheers.

@MattsWoodworks

Жыл бұрын

@@thebobloblawshow8832 awesome! I wish you the best of luck, thank you again :)

Wow

Shoot! Thats the exact knife i gave the Grandson

Dude what’s up with your planer? Have you waxed the table?

@MattsWoodworks

Жыл бұрын

No kidding right, I did a few weeks ago even. It’s definitely due for some serious maintenance. I think that the rollers are super gunked up

@chazTRAINalb

Жыл бұрын

@@MattsWoodworks I was planning a bunch of pine a few years back and it was a disaster. A friend helping me worked in a big timber framing shop and said they coat everything with WD-40.. which actually worked lol. Not something I’d do with hardwoods for fine woodworking though 😬. Much respect 🫡

Black is the easiest to fill

Don't like blackforest ceramic?

@MattsWoodworks

Жыл бұрын

I have had good luck with it, I’m just out currently

table

whats the first red tool ?

@jdcuber90

Жыл бұрын

literally say in the video lol

@sekohero

Жыл бұрын

@@jdcuber90 my english not good i dont understand

@tjpeterson1464

Жыл бұрын

@@sekohero Its a Restorer tool

wax your planer bed itll make it feed a million times easier

@MattsWoodworks

Жыл бұрын

No kidding, definitely needs it

its a shame that, not only did you make a resin table, but you used opaque resin which hid the most interesting part of the wood

@scottmulholland1329

5 ай бұрын

Personally I think that contrast you speak of - with the opaque black resin and figured wood is the best part of this overall piece. It not only promotes the sense or idea of a “River” of epoxy but the black color makes the various vanilla to cinnamon hues in the wood ‘pop’ even more. I’ve done epoxy River tables that have very little pigment added making them virtually transparent. I’ve also made opaque “river tables” like the one in this video. Every single table one builds is a small step in the learning process to meet the number 1 goal- to thoroughly please the paying customer. This table taught Matt a number of steps and I personally love that he shared that with us. If you want to pay Matt $8000 to make a more transparent River Table I’m sure he’d have that and the video for you tout suite! Hahaha

Give me your location, it would look better in my house 😂😂😂😂😂😂😂❤❤❤❤❤❤

Hey Matt, do your due diligenece before offering to sponsor a product, it turns out that Huusk knives are a scam!! You better come out with another video warning your viewers of the scam unless you are part of it 😉

So he's, what roughly $1000 into this at the very least, so it's gonna cost someone bare minimum $1700?

It would look good as bar

@MattsWoodworks

Жыл бұрын

Totally could, bar top?