Thank the people who made the epoxy, but not those poor Home Depot associates that had to re-stock all that concrete? LOL

@BlacktailStudio

Жыл бұрын

I restocked it myself. I’m not a monster

@JohnWalker-zv9yg

Жыл бұрын

Qqazz

@cryptonauntv7047

Жыл бұрын

Oh u a beast. Sipping tequila and watching those muscles tweak😏🍎

@jdsguam

Жыл бұрын

@@BlacktailStudio Nicely Done.

@BubbleOnPlumb

Жыл бұрын

Well Home Depot did ultimately get a free shout out from this and as of my watching the video has 1.38 million views! Quickcrete and Home Depot might even owe Blacktail a little something for all this free advertising!

“If you are wondering how you rent a concrete sack, you buy it and then drive it back a few hours later” had me cracking up lol.

@BlacktailStudio

3 жыл бұрын

That’s the move!

@davidmanger5193

3 жыл бұрын

Yes, I was wondering what you say at the store: “I’m so sorry I bought these 25 sacks in error as a tube of Polyfilla is really all I needed.” 🤣

@xoxo2008oxox

3 жыл бұрын

"These didn't include the water to mix. I would like to return them!"

@tippyc2

3 жыл бұрын

@@davidmanger5193 Tell them you bought a yard of wet mix instead

@respectall4551

3 жыл бұрын

Imagine the table breaks and all the concrete sack opens up. Instead of renting them now you'll end up buying them all. 😄😄

Since you're making tables out of 'broken' wood, you should take the pieces and pour a different coloured epoxy on them to make a new table, a 'table table' if you will :D

@SpuddyLlama

2 жыл бұрын

Uhmmmm yes.... That'd be sick!

@hutgaming

2 жыл бұрын

And it's got a cool story behind it!

@xamper7543

2 жыл бұрын

Something like those Japanese ceramics with the cracks filled with gold would look awesome

@adamhelberg9228

2 жыл бұрын

Then break it again and repeat xD

@hierarchitexture3664

2 жыл бұрын

Came to the comments to say the same thing

Phil. I actually thought it would only break inside the resin. I thought that would be the weak point. This was a very cool, educational video and I'm happy that you got a lot of help and had fun making it. Thanks!

@glacialimpala

7 ай бұрын

Resin is a base for the new home furniture materials that fall in the super thin super tough category, for table tops, so it actually is more durable than almost anything else (with brittleness in mind it is probably tougher than quartz?). I did not know until I had to furnish my home with Kronospan, Arpa etc. New tech is 'electron beam cured' whatever that means.

Moral of the story: Never hang pointed logs above the furniture.

@BlacktailStudio

3 жыл бұрын

You’re the only one who got what I was saying

@RickieBeubie

3 жыл бұрын

thanks for the warning, i'm gonna take off the one hanging above my coffee table right now !

@adamosantonio1499

3 жыл бұрын

No, never thats for sure 😁

@brymac8904

3 жыл бұрын

@@RickieBeubie How dare you!!! I’ll never remove my suspended furniture testing logs. How else would I know my toddler that climes on it all the time is safe??? He bangs the top of his head and feels nothing but safe.

@brymac8904

3 жыл бұрын

@@BlacktailStudio how dare you assume that? Sometimes logs above tables help my now claiming toddler feel safe on such tables. Please don’t reach out to child protective services, they agree with me... very bad joke...

Phil, so I’m waiting to see part 2 when you glue the table back together .... and have it as a give away prize. :)

@BlacktailStudio

3 жыл бұрын

I should!

@davidcarlton3016

3 жыл бұрын

Great Idea! !

@mikesudd

3 жыл бұрын

I'm down with taking it and reporting back on how well it holds up!!! Edit: Phil - just in case I have a chance

@patricknoel3642

3 жыл бұрын

I would happily use and abuse it in my workshop and let you know how she holds up

@dartstar100

3 жыл бұрын

Don't glue it, make a river-river table. With black resin...

The clear epoxy on the live edge is another level!! Really shows off the natural beauty of the timber.

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzread.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

This is one of those things that I never thought I would have wanted to see, but now that I have, my life is near complete.

@BlacktailStudio

3 жыл бұрын

😂😂😂

double the weight for every 2 feet of fall for the first several feet. (600 pound log falls 2.5 feet = 1500 pounds or 1800 if 3 feet) Plus it is impacting in a small area so the net PSI would by hundreds of times higher.

@The_DC_Kid

2 жыл бұрын

Indubitably.

@Stan_in_Shelton_WA

2 жыл бұрын

This was totally a zero to 100 approach.

@paulshuttleworth6261

2 жыл бұрын

I don’t think his point was “can this take the weight” He knew it would break, but wanted to show that the weak bit isn’t the epoxy or the bond. No point faffing about dropping stuff on it to show it doesn’t break.

@The_DC_Kid

2 жыл бұрын

@@paulshuttleworth6261 I agree. The point of the experiment was to show the strength of the epoxy itself. It was something I was wondering about too.

@RLee-zs1ds

2 жыл бұрын

Also a 'shock load' will be at least 2.5 times the calculated static load per square inch.

Phil was definitely working it. And to be honest, I really liked the look of what you had as the underside of the table top. I know this was very roughly built, but I love the deep, large, multiple cavities with a clear that allows you to see the wood inside.

Phil, great video and I'm as surprised as anyone at just how strong that epoxy bond is. 2000 pounds without even bowing at all is pretty amazing. Thanks for sharing the video. Everyone likes to break stuff now and then.

Phil: (hovering over the table) Table: “C’Mon! I’m here! Kill me! Do it! Do it NOWWW!”

@BlacktailStudio

3 жыл бұрын

😂😂😂 that made me laugh pretty good

@NyanaCore

3 жыл бұрын

Get to the chopper!!!!

@UteTrac

3 жыл бұрын

It took me a sec to get what you are quoting, one of the best movies ever!!!! :)

@mpccenturion

3 жыл бұрын

Phil is theman! thank you!

@philipbaldock5773

2 жыл бұрын

Cheers lads means alot

Phil, Now put the three pieces back together with gold-colored epoxy, Kintsugi style :)

@leightonwestbury92

2 жыл бұрын

Or even gold meta flakes

Phil's the man! The 1st thing I noticed was that the table snapped along the grain of the wood. The epoxy itself was still adhering to the wood. Nice work! I really appreciate your effort to maintain a complete transparency. Good on you. Cheers from TO!

Thank you for this video. I have been trying to figure out a cutting jig for a complex shape and was worried if epoxy would hold up to the force of clamping it. Now that I see how strong this is, I don't have any doubts that it will be fine to clamp in the bandsaw.

For testing flex on epoxy you really need to test in warm weather, perhaps for an outside table after the slab has been in the sun all day. Resins are a lot less ridged when heated.

@missbeaussie

2 жыл бұрын

I agree with you about the flex but I feel like when you're adding a couple of thousand pounds of weight those sort of differences probably don't matter.

Phil, you should take the broken pieces of that table to make a slightly bigger table with black epoxy. It'd be a great story piece too. Love your videos btw.

@BlacktailStudio

3 жыл бұрын

For sure

This answers the question I was having at this very moment, is my epoxy “river” too wide to be strong enough to hold the slabs together. Thanks for doing the experiment!!

I found the same thing when I was making scarf joints for a sailboat mast. I did a strength test (which basically involved a sledge hammer) on a 12:1 scarf joint bonded with west systems and wood flour on a basic pine 2x6 and there was only about a square centimeter of exposed epoxy afterwards. All the rest of it was broken wood. Fun stuff.

Watching your videos has inspired me to attempt to build my first epoxy table. I love your videos. The detail you give in your videos, provides great instructions on how to minimize mistakes.

Phil, I thought the epoxy would break especially with the log sharpened to a point... but I am surprised the wood epoxy bond was so strong! Thanks for taking the time to show us how durable some epoxies are.

@raf8474

2 жыл бұрын

Should have started drops at a much lower weight. Of course it broke with that, it was overkill

Just recently found your channel and love the work you do. I'm not sure if this has already been brought up, but I would've liked to see an impact test that was in between static weight and a massive log hammer. Like maybe using a large sledge hammer to test the impact resistance and not just the static strength.

This was a really fun video! I know I'm late, but I'm "binge" watching some of your videos because they are very entertaining to me and I love to see the finished products. Thanks for all the time you spend creating this awesome content :D

I'm REALLY not surprised the "Log hammer" broke it, Phil. I AM quite surprised that the epoxy didn't shatter though. I've always thought of epoxy as primarily a glue for holding the loadbearing bit's together, rather than it being used as part of the structure. I assumed that without glass fibre, Kevlar or carbon fibre in the resin it would be brittle as glass This video's started me pondering about a couple of situations where having a STRUCTURAL, yet pourable material to fill a irregular voids could have certain benefits. Thanks for making this video. It was entertaining AND informative.

Phil. This guy is nowhere near my dad’s age but I like watching this dude in his work shop... Really good content and it’s relaxing. Use to watch my dad work on his projects, happy memories.

@BlacktailStudio

3 жыл бұрын

Much appreciated 😊

Phil. That was awesome! I work with stone and the adhesives we use reacts the same way. Your videos have been very informative. I do some hobby wood working and have wanted to try working with epoxy. Thanks!

Love your continuity... Love your narrations... Really worth seeing, listening... Stay Blessed... Became a worthy fan of yours, just after viewing 2-3 uploads... Felt your sincerity in the work

The last test also reminded me of your KZread content brethren over at 'How Ridiculous', dropping items off a 40m tower down in Australia to observe the destructive results. While I am not into woodworking, I find your builds to be a satisfying watch to relax the brain.

Rented 25 sacks of concrete... That was classic!

The bond between epoxy and a material can be stronger than the material itself.

@albert.

Жыл бұрын

Relashionship goals

Great video Phil! I never would have guessed it could hold that much weight. Thanks for sharing this

Phil, since you have spoken in several videos of sealing vs not sealing the edges that come into contact with the epoxy, it would be a great idea to strength test both ways.

Phil seems like he loves the This American Life shout-out like I do. First heard it on NPR channel surfing and was blown away to hear something that interesting among the music/ads

Phil.... Your reply to 'Troll of the Week' gave me a chuckle. What some persons fail to appreciate is that some people who are artists find particular delight in the natural characteristics of their chosen material. Their appreciation for their medium may be such that they choose to modify it only minimally and thus allow its own natural beauty to be highlighted. This appears to be the approach you take most of the time. Additionally, as you share your learning experiences, you frequently acknowledge limits with your current ability. That's an honest statement. It does not mean that you have no intention of branching out to other types of woodworking or carpentry. Or, whatever. However, the time at which you choose to do so is your choice alone. It does not mean that your efforts now or your skills are being wasted. A.person may say that this particular method of bonding wood with epoxy is 'overdone'. But thet may be a narrow view as there will never, ever be two finished pieces that are the same. Because the wood itself is never the same from peoject to project. Even when the species is the same between to identical plans this remains true. Each piece will have its own unique appeal 'to someone, somewhere' After all, why would there be so much interest in your efforts, your channel, and educatiion offers if the technique was 'overdone'? To illustrate. Many chefs or cooks have concluded after much training and experience that the best approach to achieve the best meal, is to start with the absolute best product You (not someone else) can afford. Then "don't mess with it" excessively. Let its own natural characteristics be elevated. This is actually difficult for some people to learn. They find it hard to know when to draw a line. Its possible this may indicate insecurity or inexperience on their own part. Who knows? So keep doing what you enjoy. And keep sharing because "there is more happiness in giving than receiving". Commenters, myself included, do not live with you. And cannot live for you. Words without positive intent can and should disappear like fog in the heat of the sun.

Phil, surprised how strong this was. Already subscribed, weeks ago; not a woodworker, love to see your creations; do enjoy your calm voice, relaxing.

@BlacktailStudio

Жыл бұрын

Thanks Hans!

Phil, I think this is a cool idea and just shows how strong the epoxy wood bond is. I think it would be cool to see more "torture tests" on some tables.

Phil: IMO, fill in the crack with a red tinted clear epoxy, adding ~ 8 inches to the width (with the pieces laid out as you showed it in the end of the video. It would look pretty cool as a table.

Phil, these videos are still great from over a year ago! I enjoy your channel very much.

Phil, that was an incredible test. Thanks for showing us.

Great testing process. All previous loads applied the load over 48” ie 1700 lbs over the table length making the load only about 50 lbs per square inch The pointed log was a massive striking the table with a static load of 840 lbs on 1 square inch. I am totally impresssd with the epoxy bond and strength Joe Peace Retired Test Engineer

It would have been cool to see more impact tests with light objects prior to the 800 lb oak log. Maybe start out with a bowling ball dropped from 10 feet and work your way up.

One of the best videos ever on youtube. Thank you so much for this fantastic video guys. I learned a lot. Appreciate that.

I've always wondered this about the epoxy tables...and thanks for doing this. Certainly should be a very helpful sales tool for you....

Phil: this was awesome! As a carpenter most of my life I really appreciate the quality of your work! I truly enjoy your videos and am thinking of trying a table for my home. Do you have a link for your table leg guy, he does some awesome work as well!!

Thank you for this video. I used to work for a countertop place and I learned that granite has to be evenly supported when installed and even in transport. So I wanted to know if epoxy tables are strong like plywood or strong like granite lol. Once upon a time I told a new guy at work that the granite splash will crack if you just look at it wrong, and we looked at a piece and it cracked just as i said that . it was sitting on a carpet covered rack made specifically made to transport granite. That was a bit off subject but w/e. its going to break, lol i knew it was going to break.

What a great example of why taking your time doing a great job of cleaning the edges of bark and deadwood in a slab prior to pouring is so very important to the overall strength of the table which is clearly demonstrated here how strong the bond is between the slab and the epoxy

I am a new subscriber and I have noticed in the few videos you post you talk a lot of course and I enjoy that, and meanwhile you drop a few tips from time to time. They all can be very useful to people that are interested. I suggest you make videos from time to time about tips and other about tutorials (I think you mentioned you did this one though like how to make leakless molds). And please carry on! Lot of love from Casablanca, Morocco 🇲🇦

Phil, that troll of the week is epic. Love your channel, and your honesty about products and the way you test them is refreshing. Especially on a platform where others will promote the first company that sponsors them.

Phil- I didn’t expect the epoxy to be that strong. How does it hold up to the elements like high heat and humidity? Another great video, thanks!

@aliensarefromspace

2 жыл бұрын

Different epoxies have different applications. Some are UV resistant; some are heat resistant or heat transfer optimized; some are extra strong or brittle. Different mixtures & additives can change the properties of epoxies :)

@The_DC_Kid

2 жыл бұрын

@@aliensarefromspace Geee, tanks, Perfesser Poxy. (Smart-ass space aliens with their giant heads think they're SOOO smart)

@marcoborrillo8097

2 жыл бұрын

great question, I was wondering if we could use one of these as the world's most beautiful patio table. Maybe something like a blue epoxy with swirls to look like water would make a very nice outdoor patio table.

This is a fantastic video. Something I can show to costumers in the future. Thank you for making it!

That was a great test, I’m impressed with it. I certainly would be ok with an epoxy table. Thank you.

“You should re-evaluate who’s coming to your parties” Nice

@BlacktailStudio

3 жыл бұрын

👊👊

I just went to goby walnut today and it was awesome I got a lot of little slabs

@BlacktailStudio

3 жыл бұрын

Oh awesome!

Phil!! :-) GREAT tests! I am looking forward into starting to build things incorporating epoxy.

Phil- amusing, but not what I want to see more of. I think you're a great craftsman and that's what I enjoy watching, how things come together. I also enjoy your sense of humor.

Phil. So, reading the other comments about reconstruction of the table with contrasting epoxy has me anxious to see see it done. I say go for it. That or more tribal arm bands, tough decision. 🤔

@BlacktailStudio

3 жыл бұрын

All in

Phil is a genius! I think I would like to see how "tough" an epoxy table is. How much wear and tear can it take? What if you had hit it in the middle with a 20 pound sledge hammer? Or dropped a cinder block on it from a second story window? Or taken a boiling pot of water and set it on it without a trivet? Or dropped it off the end of a truck onto some concrete steps or a curb? These are all more likely scenarios that could happen to the table than dropping an 850 pound oak log on it. Sounds like the basis for a sequel to me. :)

Phil....Great video with very interesting content. I am amazed at the strength of the glass!!!

❤️ Phil - I really liked the look of that table ( clear w/ the dark wood) before you broke it❣️

Phil - I'm a bit late to this, but if you still have the three pieces lying around in the shop, you gotta make a new table out of it. Would be even cooler if you could use a piece from the log that broke it too, but I'm 100% sure you won't have that lying around haha.

Phil: So sad to see that beautiful table broken, it would have looked better and had a longer life in my dining or living room. 🙃 Edit. Send the next table you want to test to “Demolition Ranch,” for them to test it against different caliber weapons. Might be a great video (advertising wise) as Matt has millions of subs and views for every video.

i found it fascinating that it wasn't even where the epoxy bonds with the wood that gave way first, it was purely the wood slabs that couldnt take it. i would've thought the bonds between the 2 materials would've given out first. you learn something new every day and it goes to show how strong that bond is.

That was crazy. I would never have believed this would hold up that well!

Phil, I am amazed that the epoxy didn’t break. Just goes to show that the tables you make are made with the best products.

I’ve been waiting for this!!!

@BlacktailStudio

3 жыл бұрын

How’d I do??

I especially enjoy adjusting the safety ski cap before release!

Incredible ! I had no idea epoxy to wood bond was that strong ! Thank u for the experiment!

Hi Phil, really like the results I see with using epoxy but it also bothers me to turn a nice piece of wood into compound material which at the end of life will be residual waste. How do you think about this?

Phil, love watching your work, but troll of the week is becoming my favourite part of the video

All my doubts about epoxy bonding with wood is now clear.... Thanks bro...

Shouting out from South Africa.. Phil, I love your video man very informative, this really reveals how ideal epoxy tables are.. keep up the great work!!!

This was really interesting. I often wonder about the performance and longevity of some of these new fangled techniques, compared to just plain old wood by itself which we know for sure can last a very long time. So this was cool. Also, I completely support your transition to 100% tribal arm band production 😂😂😂

Is super clear epoxy weather proof and how long does it last out doors! Your work is super inspiring and looks awesome to do

@antonhelsgaun

2 жыл бұрын

I love he hearted your comment without replying

Very cool. Thank you for sharing. Results were surprising.

Amazing! I want to put a water epoxy table in my RV. The dinette turns into a bed. Now I’m confident it will be strong enough!

Phil. My only thought is, you usually mill it back down to the wood surface. With that being said do you think that sheet of epoxy on either side would add more strength then your usual table. (Ik I'm about a year late haha love the videos though!)

@EasyPickens999

2 жыл бұрын

Exactly what I was thinking

@conradoformanes3115

2 жыл бұрын

I, too, was thinking the same thing. I think it would have failed much sooner with the cement bags if you had planed the surface back to the wood on both sides. the epoxy would have only been attached to the edges of the wood along with any anchor points that could have seeped into the wood but cant imagine going very deep into the wood. The wood would have failed from the stress load. In your test, the wood was completely encased in epoxy similar to rebar reinforced concrete. The epoxy in the "river" portion of the table is being reinforced by the epoxy all through out the table.

Phil, do you think the two previous tests could have also weakened the wood, even though the epoxy never really broke?

Love your videos very knowledgeable And very educating work you do is amazing

Phil. Hi just to you answered my question I've been wondering about for a few years now how strong is that bond from the live wood edge an epoxy 👍. I don't make any tables with epoxy and if I do it will most likely be for myself but now I know ! It was great you got support to carry out this experiment and gave some entertainment too. Great work 👍

Aw, I was hoping someone would have put together a look at the forces involved between the resting 2k lbs and the falling 840 lbs. Gonna have to pull out my high school physics notes...

Now I want to see you salvage this table. Put it back together. ;)

@BlacktailStudio

3 жыл бұрын

Oh ya!

had wondered about this..very informative indeed..thanx.

I have an old wearhouse cart that I'm wanting to do and this clear will be perfect that way I can still see all the wheals and other bracing on the bottom

Phil says, “now put those pieces back together with a signature deep black river.

@BlacktailStudio

3 жыл бұрын

Oh ya!

Well now you can re-epoxy it back to one piece if you wanted 😉

Interesting video.....I would like to see the same test done with both sides planed back to the wood. That will be a true test of the epoxy bond to the wood.

your effort you put in this video is inspiring

I was wondering about the strength and this video popped up!🤣 KZread knows me!

Start the next trend: epoxy table broken and epoxied back together 🤣

@BlacktailStudio

3 жыл бұрын

Right?

@gunna2cool

3 жыл бұрын

Had this same idea 🤣

@powdah12

3 жыл бұрын

Kintsugi ?? Use gold epoxy for the repair !

This was amazing really cool to watch keep up the good work 👍

Phil I was impressed with the strength of the epoxy

Phil, I already have audible. You should repair the table using a blood red filler for epoxy. Would look bad ass

If I were you, I’d keep the pieces and try to put them back together in a way that you can clearly see where it broke but you’ll have an intact tabletop again. Like with black epoxy or gold?

I love the idea of an apoxied apoxy table. Putting it back together with the gaps in a clear apoxy is somehow satisfying to me. Kinda like art within art. Cheers from Canader eh!

Beautiful idea and very instructive

Phil: I'm looking forward to the rude comment and your funny reply at the end. That's satisfying for me as well

@BlacktailStudio

3 жыл бұрын

😂😂

@markbrown6236

3 жыл бұрын

Would make a great table with a story behind it.

@gunna2cool

3 жыл бұрын

Aye, one of my favourite parts of the vids 😁

Phil. When you realise that the background at 7:56 is a giant log...haha...makes what they put on there look like a joke!

@BlacktailStudio

3 жыл бұрын

Right??

This answered so m my many questions. I’m impressed

Fun stuff. From an engineering perspective, there are definitely a few observations: 1) Not surprised that the impact load of the dropped log broke the table where the static loads did not 2) Sharpening the end of the log definitely made it more likely to break the table - a flat ended log may not have had the same result 3) "renting" concrete mix - hilarious!