How To: Frigidaire/Electrolux Oven Safety Valve 3203459

Тәжірибелік нұсқаулар және стиль

How To Replace: Frigidaire/Electrolux Oven Safety Valve 3203459 www.appliancepartspros.com/fri...
Symptoms: failed; not letting the gas out.
Tools: 3/4" wrench, 9/16" wrench, flathead screwdriver, 3/8" nut driver, 1/4" nut driver.
This Frigidaire/Electrolux made Range Oven Safety Valve replaces the following older part numbers on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, Sears, and Kenmore Ranges: 300, 3131449, 316066400, 3201101, 5303131449, 774T117P10.
Buy the new Range Oven Safety Valve 3203459 here: www.appliancepartspros.com/fri...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

Пікірлер: 43

  • @amyhazelvang7198
    @amyhazelvang71986 жыл бұрын

    Could we use any kind of gas approved thread tape? Of it has to be a paste, due to the heat it may get while using the oven

  • @danwebster7120
    @danwebster71205 жыл бұрын

    One thing you failed to mention is: the new part is not adjusted for Nat or propane gas. A good tip is: sit the 2 parts side by side and make sure the orifice on the new part is at the same height as the old part. -PawPaw (retired appliance parts sales)

  • @appliancepartspros

    @appliancepartspros

    5 жыл бұрын

    Thanks for that tip!

  • @danwebster7120

    @danwebster7120

    5 жыл бұрын

    @@appliancepartspros Anytime Roman

  • @kameron118

    @kameron118

    3 жыл бұрын

    Is that the only orfice in the oven for the burner and broiler? For this stove model?

  • @creekbottomtradingco.4556

    @creekbottomtradingco.4556

    Жыл бұрын

    Just replaced a dual out out safety valve now one side flame is insanely high and full of carbon. Any chance you could tell me how to adjust the orifice?

  • @Cassandra112

    @Cassandra112

    Жыл бұрын

    yeah. just had to replace the safety valve on mine. "for LP gas installation, the hood should be screwed down against the hood pin. For natural gas installation, the hood should be backed off two or three turns from the hood pin." is the instructions. the hood in question is the orifice/nozzle. 1/2" wrench. hand tight.

  • @DVFMovieProductionsHippos
    @DVFMovieProductionsHippos6 жыл бұрын

    Thanks for the video, now I know how to install our new safety valve once it comes in.

  • @appliancepartspros

    @appliancepartspros

    6 жыл бұрын

    Glad the video could help you out with your repair! If you need more help once the part arrives, feel free to call us or chat us. We offer free technical advice.

  • @kameron118
    @kameron1183 жыл бұрын

    Is that the only orfice in the oven for the burner and broiler? For this stove model? I’m converting from NG to propane. I already changed the stovetop but I haven’t found any orfices inside oven.

  • @chuckhaller1519
    @chuckhaller15192 жыл бұрын

    Whats happened to good old American pride. My grandmas stove still worked after 30 years. Now a 700.00 stove quits twice in 5 years.

  • @javierespana2807
    @javierespana28073 жыл бұрын

    What symptoms do you encounter to determine there is a problem with the valve?

  • @joerussell7856
    @joerussell78563 жыл бұрын

    The safety valve I need to replace is a Y-30128-35 for a frigidair but it is on average 50 dollars more expensive than the GE Y-30128-77 which seems to look exactly the same (except for a small mounting bracket) and has all the exact same Voltage, Amps, PSI, etc. Can I just use the cheaper one? Thank you in advance!

  • @dyardsale5475
    @dyardsale54755 ай бұрын

    great video and footage

  • @appliancepartspros

    @appliancepartspros

    5 ай бұрын

    Thank you. If there is anything we can help you with in the future please let us know.

  • @amyhazelvang7198
    @amyhazelvang71986 жыл бұрын

    You forgot to seal the gas valve

  • @tiffanybaum6147
    @tiffanybaum61476 жыл бұрын

    Does the larger end also connect to the igniter?

  • @appliancepartspros

    @appliancepartspros

    6 жыл бұрын

    I'm sorry, I don't understand your question. The larger end of what?

  • @tiffanybaum6147

    @tiffanybaum6147

    6 жыл бұрын

    AppliancePartsPros the wire with the larger metal connecter that goes to the right side of the safety valve, does that wire also connect to the igniter.

  • @appliancepartspros

    @appliancepartspros

    6 жыл бұрын

    Oh, I see. Yes, it does. We have a video for the oven igniter where you can see this better here kzread.info/dash/bejne/q3Z8lM2ceZjUeNI.html

  • @larrylopez9614
    @larrylopez96144 жыл бұрын

    I had both boiler and bake not work on my Frigidaire stove at the same time. Does it have something to do with the control panel or this safety gas valve?

  • @Lando1020

    @Lando1020

    4 жыл бұрын

    Possibly the "ignitor" as it signals to valve when to open and allow gas in. There are a couple ways to test ignitor. Do a quick search and you'll find em :)

  • @ImTheeBatman

    @ImTheeBatman

    3 жыл бұрын

    @@Lando1020 would they igniter still heat up if the safety is broken

  • @Lando1020

    @Lando1020

    3 жыл бұрын

    @@ImTheeBatman it's possible. There are different ways the safety valve can fail. For example the safety valve on my stove needed to be replaced because it was not shutting off completely. It had no issue turning on the stove, oven or broiler. It just wouldnt close all the way when everything was off. I had to manually open/close valve at shutoff valve by wall. Safety valve replaced and issue was resolved.

  • @ImTheeBatman

    @ImTheeBatman

    3 жыл бұрын

    @@Lando1020 Ok thanks I think the safety valve is the next part I have to try. I've replaced the igniter and temperature sensor and nothing. But my igniter still won't heat up.

  • @jgeorge659

    @jgeorge659

    3 жыл бұрын

    @@ImTheeBatman I’m having this same exact problem. New thermostat and igniter but the igniter still does nothing. Did you resolve your issue? If so, what was the problem?

  • @stevenmcclain6336
    @stevenmcclain63365 жыл бұрын

    Any way to "repair" this type of safety valve vs replacing it. I removed the valve then tapped all around it in an attempt to un-stick it. Then put it back in. Nothing. Then, without putting the bracket back on, tapped it while energized. Nothing. Any tricks besides replacing it?

  • @danwebster7120

    @danwebster7120

    5 жыл бұрын

    this is non-repairable however if you do have continuity it may be your ignitor is weak or if water got into the valve its a dead duck.

  • @ladonnad.steele2470

    @ladonnad.steele2470

    3 жыл бұрын

    Hard hits ruin them

  • @lswong2009
    @lswong20093 жыл бұрын

    My Frigidaire oven is not lighting up. I thought it is igniter is going bad, but after replacing the igniter and it is still same, not lighting up. No gas coming out either. Anyone knows what happened? Thanks 🙏

  • @slipperyslope5364

    @slipperyslope5364

    Жыл бұрын

    check by your regulator at the back of stove there maybe a little flip switch which turns off the gas to the oven. If your oven don't have one you need to check the safety valve

  • @user-qp1st7rh3l
    @user-qp1st7rh3l10 ай бұрын

    You don't have to put no sealer on the gas tube to the safety valve ?

  • @appliancepartspros

    @appliancepartspros

    10 ай бұрын

    What is your model number?

  • @user-qp1st7rh3l

    @user-qp1st7rh3l

    10 ай бұрын

    @@appliancepartspros FGF319KSA

  • @user-qp1st7rh3l

    @user-qp1st7rh3l

    10 ай бұрын

    The video you showed didn't show you putting no sealer on the gas tube to the safety valve , just being safe

  • @appliancepartspros

    @appliancepartspros

    10 ай бұрын

    It doesn't appear that it is required to use sealer for this part.

  • @chuckhaller1519
    @chuckhaller15192 жыл бұрын

    The only place fridgidair is any count is in a recycling yard.

  • @chuckhaller1519
    @chuckhaller15192 жыл бұрын

    I won't ever buy a fridgidair nothing.ever again. Had a new refrigerator, it broke down with in two years. Ordered part installed it 3 years later broke again. Same thing . New dish washer broke in 4 years , bought a GE. And a new stove 5 years ago. And it broke in 3 years. Replace ignitor. And now tonight ignitor and safety valve. Broke. Now place to get parts on thanks giveing and can't cook turkey with 7 guests coming over. Fridgidair sucks. I wouldn't ever buy any thing fridgidair ever. Again. They will break or quit within first 3 years

  • @CRAPO2011

    @CRAPO2011

    2 жыл бұрын

    Did you get your frigidaire going again?

Келесі