Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
Unlock the solution to a snow filled headache with this easy fix for a Powersmart Snowblower that won't start.
Say goodbye to frustration as we guide you step-by-step through the process of replacing the carburetor, leaving you with a perfectly functioning snow blower ready for winter. Don't let the snow win this season, watch now!
If the carburetor isn't too bad see our guide on how to clean and rebuild the carburetor on a similar LCT engine at • Husqvarna ST 230P Snow...
Make sure to pay attention to the intake gaskets and plastic insulator because of they are not fully sealed the snow blower will not run right because of this air leak
We go through the full repair process and show each step to ensure you can get your snowblower back running again.
Normal symptoms of this problem are unit won't start, snowblower won't stay running, starts but dies when you take it off choke, leaks gas, or one that surges or dies when put under a load.
They all come back to the same issue and repair process!
Always check the oil level before starting. Sometimes fuel can be mixed into the crankcase which will cause major issues if started like this.
You carburetor part number is LCT 03121 on this LCT PW2HK10650178EABGOQUVE1M Engine
This carburetor can be purchased at amzn.to/47LNTxm
If you replace the carburetor, be sure to check and clean the new carburetor because the quality control is not good. This does not matter if you are using OEM or aftermarket replacement. They should both be checked before installing. See our video on this also!
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#powersmart #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.