How to fix the CDJ 2000 Wait E-8709 Error Tutorial
Tutorial on fixing the E-8709 / Wait Error on a CDJ 2000 by reflowing the BGA of the two chips on the main assembly using just a heatgun and a screw driver.
I fully covered how to dissemble the cdj, the reason for the error, the reflow process and re-assembly of the unit.
You could also use this tutorial on how to replace the main assembly board. Pioneer Part: DWG1660
Post in the comments if you have questions and I'll do my best to respond.
This should apply to the full line of CDJ standalone products:
Pioneer CDJ 850
Pioneer CDJ 900
Pioneer CDJ 2000
Pioneer CDJ 2000 Nexus
Пікірлер: 152
Holy moly. This video is 8 years old. In my life I fixed absolutely nothing so far when it came to electronics. I followed the steps to fix my player and can hardly believe it worked this perfectly. Thank you so much James. Fantastic work.
@jameswross2003
Ай бұрын
Glad it worked!!
@djjonjat
13 күн бұрын
im about to try
I Just did fix one of mine that presented this problem. Did It with a hairdryer!!! 3 rounds of 15s on Max heat. I isolated the rest of the board cutting a square hole with the Chips size on a piece of paperboard. Job done! Amazing tip! Thank You so much for the vídeo mate! Helping half of the world with this! Amazing how these Pioneer CDJs are a piece of crap inside...
Thanks! 2024 still saving cdj’s!! Saved my set!
@jameswross2003
2 ай бұрын
Score!
So glad I came across this video, bought a heat gun for £15 and it worked like a charm no issues what so ever! Can’t thank you enough pal!
James, thank you so very, very much! Had this error on both of my CDJ 2000s, took them apart following your video and fixed them with a hairdryer. Absolutely stoked!
This is a life saver video...! Worked for me 1st time with a hairdryer, 3 lots of 7 seconds at 2cm distance from chips. Thank You James. New mother boards are 405 euros and waiting time right now is 17 weeks, as there is a huge shortage of parts and micro chips due to Covid
Today out of nowhere, i got the e8709 error. I exactly followed the steps. It worked for me :) Thanks for the video.
THANK YOU SO MUCH! I'd lost all hope that my deck would ever work again and then stumbled across this video. Got it working on the 1st try and the deck is as good as new. You're a legend James, many thanks!
@jameswross2003
4 жыл бұрын
Glad it worked!
@vitonicolosi4578
2 жыл бұрын
Io ho lo stesso problema con i cdj850 e-8709
Ok this is insane. Just did this to my CDJ and it completely got it working again!!! Thank you James, this tutorial is an absolute life saver.
Thanks so much for posting this video. I was desperate and this got my cdj running perfectly!
Just want to say thank you! Mine just showed the wait error and booted, didn’t showed the error in red. Just tried exactly what you did but with a hair dryer and is working perfectly!! Thank you a lot!
@jameswross2003
3 жыл бұрын
Glad it worked!
yep it work for me too... i went and bought a heat gun (Bauer) that had 3 settings and a dial from 1-10 so i used it on high and the number 2 for a few seconds each time as instructed and IT WORKED LIKE CHARM ...ON THE FIRST TRY!! James i cannot thank you enough for the extremely detailed video and saving us time and money! you are the goat!
@jameswross2003
9 ай бұрын
Glad I could help!
Fixed my CDJ-2000nexus like a dream! Just 3 zaps of 7 seconds each with the heatgun on the first chip and the TI chip. Thanks!
@Dreamer2go
2 жыл бұрын
Hey Afix, 2 years later, does your CDJ still work?
@AfikCohen
2 жыл бұрын
@@Dreamer2go Yep! I sold it a year ago and it was still working great
@juandavi94
Жыл бұрын
What was the temperature?
IT WORKED!!! Easy job with a hairdryer - thank you so much!!!
You saved my old CDJ 2000 first version :) Thanks so much for your valuable tips!
Thank you! You saved both my cdj's!
just want to say i did this and it works like a charm thank you !!!!
Great tutorial! Helped me fix the exact error and refit a broken cable.
YOU ABSOLUTE LEGEND TAKE MY LIKE AND MY LOVE! This is the only YT tech tutorial I have ever followed that has been successful for me. Thank you!!!!!!!!!!!!!!!!!
You made my day better. Thank you very much now it's working perfectly!
hi, thanks for the video. I tried it and it seems to have woked so far. cheers from Ireland
@jameswross2003
7 жыл бұрын
Glad to hear it dude!
I did it with a hair dryer and that works to. Thanks from France dude !!! You save my CDJ, me and my wallet 👍
@imsid89
Жыл бұрын
Hi. How long do you heat that with hair dryer?
WORKED
@Dreamer2go
2 жыл бұрын
Hey FX, 1 year later, does your CDJ still work?
@Adriano.uzumaki
2 жыл бұрын
hello friend is it still working after so long?
@imsid89
Жыл бұрын
Hi how long you heat it with hair dryer?
Hi, I just want to thank you again , it's a second pioneer I'm fixing because of this video , subscribed on your channel
First try fixed, thx 😍 all credits to you
Great man! Problem solved!! Thank you so much.
Thanks a lot! This worked perfectly. You saved me a lot of money. Much respect.
Works like magic. Cheers from France ;)
@jameswross2003
7 жыл бұрын
Awesome! Glad to hear it.
Thanks a lot! It worked for me, and it works as brand new!! 🎉
your a god among us mear mortals thank you so much this acually fixed my issue. and it was definitely a temperature thing as a i rented my cdjs out in an outdoor summer event and they were scolding hot to the touch worked fine all night till they cooled down and broke next day..
Bro thank you so much it worked perfectly. Real public service THANK YOU
Első kísérlet után sikerült! Nagyon korrekt videó, ahogy te is! Köszönet érte a világ másik feléről!
It worked! Amazing! Thank you so much!
You sir are the greatest! Thank you so much!! 🙏🏽❤️
Great job James
Amazing this worked for me as well. Thank you!!!!
Defo the man of the year 🙏😎
I followed the procedure and at first it worked but when I off and on it, it went back to the WAIT then I did it again and it worked. Something weird also happened, the Cdj always work perfect before I close the back tray but as soon as I close the tray and put the bolt, it will stop working and go back to the wait error. I did that like 4 times before I decided not to put all the bolts on the back tray so I only used 3 of the bolts instead of the 5 and it working perfect ever since. I still don't know why that happened till now. thanks, God bless you.
This worked for meeeeeeeee! Thank you James
@Adriano.uzumaki
2 жыл бұрын
hello friend is it still working after so long?
Done this today and yes it works ❤
Thanks for video. It's working.
@jameswross2003
7 жыл бұрын
Denis Kukovic great!
Thank you James !
Thanks From India it works.
Unbelievable......its works....thanks
Life saver. My CDJ2000 was displaying the 'wait' thing, and then i got black screen/restart. After the heating it works perfectly.
thank u , so much man!!!!! u saved me 400 bucks!
@jameswross2003
7 жыл бұрын
Drumtech Awesome. Glad it worked out!
@Drumtech08
7 жыл бұрын
It worked for a while, then stopped working. retried process, now screen goes on and off and grainy pixels appear. any idea what the issue could be? is replacing the MAIN ASSY, the solution to all of this?
Good work, nice fix 😎✌🏼️
Thanks for the info. Got mine working again although I used a soldering iron at 400 degrees C, put a piece of foil on top off the chips to heat it up and boooom! it works again!
Good one thanks a lot it works !!!
Thanks a lot.. it’s really working🙏🏽
@jameswross2003
26 күн бұрын
Great to hear!!
Hi. Thanks for the video. I have the same e-8709 on XDJ-R1. Will this way of fixing work with it?
i am having the same problem on my cdj 350. it shows e 8709. will this work in my case, too? really dont wanna go for pcb replacement
You are doing great, you hit the head👌👌👌👌👌👍👍👍👍👍👍
please i want a video to Disassemble PIONEER CARROZZERIA FH-P66MD how to connect and reconnect flat cable connections in this device
I have the CDJ 1000 and the same mistake E- 8709 will be that I can do the same process ??
I want to know if this works for other pioneers equipments like the DJM2000 With Init errors 0004 ..??
question: does this also works with the cdj 800 mk2? my set has also a E-8709 error, and when he gets that error the cdj reboots himself, do you know how to fix that?
thanks man! works on CDJ2000 NEXUS
@jameswross2003
7 жыл бұрын
Great to hear!
Awesome dude thank you.
How long is the recommended heating time? I recall you said 30s in the video, but your intervals are like 10s - 7s - 6s where the - is about 6s of cooling. Please reply soon! trying this in the next 12 hours
Helpful thanks,does anybody knows how to fix repair or replace the track searchlight?the one on the search knob,Thanks.,
Hi mate. Last night i got this E-8709 error msg on my 1000mk3 will it be the same process to fix? My problem is that the circuit boards are different to urs
Could this fix a 'Main CPU Error' on a CDJ900 Nexus?
it can also resolve the e-7022 panel cpu error?
do anyone know if this also will works with the cdj 800 mk2? my cdj 800 mk2 got the same error and the screen is flashing on and off and he try to reboot and try to read the cd but then the screen goes off and on. Thanks at first :)
Sangat bagus saya terbantu tototial ini
It works!!!
Gracias me sirvió de mucho
Thanks man! it´s working!!!!
@Adriano.uzumaki
2 жыл бұрын
pablo hello friend is it still working after so long?
@pablodomingueznunez6267
2 жыл бұрын
@@Adriano.uzumaki only for few months, later appear again
@Adriano.uzumaki
2 жыл бұрын
@@pablodomingueznunez6267 ok pablo thanks a lot, i'll try to do it tomorrow and try to sell it fast, did you try to do it again?
Hey James Ross, really appreciated your video. As I manage to repaired 1 of my Cdj 2000, but I have a question. The other Cdj shows a waiting loop and automatically restart. Not sure if you've a solution, but would appreciate your comment.
@Thijzekneiz
Жыл бұрын
@@DawummbatZXT for me the same fix worked out :)
Hi! nice video! Please could you be so gentle to explain to me how is possible a thing like that? And how did you discover this? How is the reason cause the heating fix the error? And why the chip change the behavior of the cdj like that? What happened to the chip and what do the hot air to the chip? Is incredible. Coul be the humidity? Or the vibrations? Is something connected to the hits when you move the cdj from the case to the consolle? I'm curious! thanks a lot!
Hello Man i got a Problem with my cdj2000nexus Player he shows me the E 8302 Error could you tell me how i can Fix the Error? Many thanks by the Way for your Instructions !
On 850 the part you heated here is a bit different, it's without cable sockets. Is it gonna work this way? Update: tried 3 times, not working with 850
If like xbox this fix is probably temporary. People “reflowing” it with hairdryers, a hairdryer is never gonna get hot enough to melt solder otherwise it would be too dangerous to put near your head😂 Headgun would def get hot enough but personally i would recommend if you are reflowing bgas that you run some liquid flux under them first as it will help the solder flow better. Also would recommend a temperature probe to check what temp the board is getting and maybe some foil and capstan tape to protect the other components. That aside thanks for the info on the problematic board. Good job
Great video man! I have the same problem on CDJ-350. Who I fix that?
Will it also work with CDJ 1000mk2s
My CDJ 2000 display fully not working! if i shack that jockey,that jockey's display goes black & hangs! i opened that jockey and cleared the ribbons 1 side! then pioneer dj appears then boot again what should i do? change the ribbon or something else!
nice job man tnx i just change before few days on mine cdj 200 encoders on jogs ... and serviice try to get from me about 200 euros for 15 mins of job
It fucking worked, first try. Let’s gooooooo
Same Problem CDJ-350 Error E-8097 plz help me
спасибо,помогло👍🏻
I've just had this problem happen to me, I had it fully unplugged for 3 odd hours like someone prior mentioned. I then put the latest firmware onto my usb and went to update bit still had the e8709 message appear. I think turned it off and did a factory reset ( usb stop & disc eject buttons theb power on) on the unit and by miracle perhaps it came right. Don't know if this will help anyone but my 2000 is working again!
Can it work on CDJ-Mk800?
Great... Sir I am from India and my pioneer CDJ 850K is showing an error E6002.. I will be very grateful if you could please tell me the reason behind this error and the solution. Thank you
I did it this and it worked, but later some month it happened again, pls lasting solution pl
Hey man, I gave it a go not sure if I went to hot or something, but now it powers up but only the track search buttons light up and the CD light at the bottom. Any ideas? And would it be possible to just buy a new one of those mother boards or whatever it is haha.
@marceloferreira3491
4 ай бұрын
Onde se consegue a placa?
Bom dia ! Fiz no meu ontem esse procedimento muito obrigado deu serto show
JAMES ROSS AKA... LEGEND!!
hi,Excuse me, I used the hot air gun to solve the problem of the cdj2000 E-8709 according to your method, but using the hot air gun to solve the E-8079 problem, another problem is E-7001, how can I solve this E-7001 problem. @James Ross
@ravist8243
4 жыл бұрын
I just use a hot air gun to solve the E-8079 fault, and another fault E7001 will appear. How can I solve it? Can you help me teach me?
This just happened to me in the morning today. May i ask WHY does this happen???
that sound of of tasters on cdjs and turn of on botun will never change ti 😂🤣
Do you know the “E-7022 panel cpu error ” What should i do ?
@mkfn8
4 жыл бұрын
for me too... did you find solution?
Hi, maybe u can help me, i have a problem with my cdj 2000 non nexus(2010) the sound comes out a little low, i tried to change the RCA module(JACB assy part number:dwa2988) and also ribbon cable(13P FFC part number:DDD1484) but the sound stills coming out at low volume, any ideas? Thank you, keep making videos!!! Matias
@jameswross2003
6 жыл бұрын
What are you hooking the RCA's in to? I would try to use the digital out and see if you still have issues (you can use a regular RCA cable for that too) and just plugin to the mixers digital input. Keep in mind the CDJ's output is going to be at LINE levels so if you are hooking in to something that's non-amplified it will sound quiet.
@matiman23
6 жыл бұрын
So, i use my cdj's with a normal mixer, i have 4 cdj's 2000 and the others cdj's works perfectly, i buyed the last cdj with that problem(due to a drink incident inside in a club over the cdj) so it's not a problem between the cables or mixer...im trying to fix but there's no error on display, everything is working apart from the low signal
good job! worked for me... but how do you explain that?
@jameswross2003
7 жыл бұрын
ball grid array that secures the chip to the PCB has heat stress cracks in it. using a heatgun reflows it.
Cómo se llama esa tarjeta por favor
Hi, any help with E-7001DISC DRIVE ERROR? thanks
@dmbpromovents034
5 жыл бұрын
Softmal Music i have this problem e-7001 Disc drive error!!! how do I resolve this error? Please help!!!!!!!
@Dreamer2go
2 жыл бұрын
@@dmbpromovents034 I am guessing the ribbon cable is damaged. When I assembled mine, I did a rough job, and totally saw one of the ribbon cables damaged. Must be that
do you know the wattage of the heat gun? I don't want to get one to powerful and fry mine.
@jameswross2003
7 жыл бұрын
Ste Mc D 1500w
@bgstemcd
7 жыл бұрын
James Ross ah that was quick..thanks very much. fingers crossed I don't f#$k it up
So how hot the heat gun need to heat up and how long
@Dreamer2go
2 жыл бұрын
@James Ross, I would like to know this information too. Debating if I should just use hair dryer instead of going out and buy a heat gun
Ok so I discovered this error at about 9pm on a Friday night. I unplugged the power cable along with all rca and link cable, left the house for about 3-4 before i returned to give it another shot. Plugged everything in and for some miraculous reason it works. I have no idea what the hell is going on, and highly doubt what I did had any influence, but it just started working again...
@brycenie3335
7 жыл бұрын
Left the powder cord in the night, and it's not working again...
They really should incorporate a fan inside device