Can't believe I never tried this before, but some gentle heat on the old pressure ring and it will pull away from the plastic without leaving the old glue behind. GENTLE don't damage the plastic are anything else. I used my hot air rework station at 100 degree C.

Thanks! Helped me replace my Nexus2 job sensors in a half hour! Repair shop wanted a couple hundred and the part was $30 bucks.

Great tutorial man, very motivating with superb instructions. I just exchanged the jog wheel dials of my two CDJ 2000’s. Keep up the good work 😎

Thanks, really well presented video. Stretching out the three spring a tad also can improve the motion of the jogwheel and resolve issues with the pressure sensitivity as they compress over time. Can confirm the CDJ1000 is almost identical Wish I'd have watched this video before trying to figure out myself how the jogwheel worked to try and fix it.

@DJlegionuk

4 жыл бұрын

but it makes it feel a bit too springy when you press down if not carefull, I have done it a few times and when I dj on them later it's obvious and feel wrong.

Eating up your vid's. Excellent resource and nicely edited

@DJlegionuk

4 жыл бұрын

Thanks, I will keep making them when I have something different in for repair.

Just replaced mine with your help. Thanks!!

@rupeshmore1023

Жыл бұрын

where can i get this in india

Great job and thanks to share this repair cdj video with us !

Great video! I love fixing my CDJs - same 2000 NXS (1).

Thank you! I thought I was missing something when I got my new sensor strip and it didn't have the rubber bumpers on it. Its funny it didn't come with them already on it, but they its Pioneer! ;-)

@DJlegionuk

4 жыл бұрын

I do not want to look how much it would cost to replace them !

Great video I would love to see more of this content!

Wouldn't you always want to just replace the springs while you have the player opened up for this job? I am about to do one of my CDJ-2000Nexus players and I got the pressure ring and the springs ready to go. I appreciate this video!

Thank you so much!!!!

Grazie mille, ottimo tutorial!!!!

Great video! Do you have a video explaining how to repair the jog adjust on a CDJ or at least putting it back together properly if you take it apart?

Really nice and thank you

Excelente video ! gracias !

Hi, how are you? Thanks for the tutorial, it is very helpful. I have the same problem with a CDJ 850, today when using it I noticed the problem, it makes me weird because the sensor worked perfectly, it did not even give me any indication of failure, I read in a comment that the springs may have something to do with the failure? Thank you and you have a new subscriber, greetings from Mexico!

Great video. can you tell me where can i get the parts for Nexus 2? Thank you

Excellent

Hi When I switch to vinyl, it stops. I can still scratch, which is strange, I can still cue mark, but pressing play doesn't

could it reused that sensor strip after removal only asking as i need to swap one to another as my holder is damaged

I have the same issue on the Pioneer cdj 3000 the jog wheel is stiff on do you fix this issue it's still new

Hi, what is first signs that the pressure sensor is faulty? I have ddj-1000 and it seems like the pressure sensor is always activated. I wanted to replace it too but I dont know where to buy the sensor from

Thanks for the brilliant video. I wanted to change the metal top plate on my Pioneer DDJ-SZ it’s got a deep scratch on it. Everything is working fine. Would the best way to remove it is to use the heat from a hairdryer to soften the glue?

@DJlegionuk

3 жыл бұрын

I never tried so can't really offer advice

Hi! Thanks for the video, nice tutorial! I have a question, maybe you could help me. My cdjs2000nxs jog top is a little scratched, is it possible to change only the top (the silver top) or I have to change the whole jog? I found the code of the plate, should be DAH2907

@DJlegionuk

11 ай бұрын

HI, yes it's possible , but a bit of a pain to do. I replaced them on a XDJ-RX2 and you have to heat them up to loosen the glue and if it's the same they had a small access hole on the underside so you could push the plate up. Depending if the new part has the glue on the back you might need to order a new glue sheet as well.

Beleza! Essa peça (DSX 1078) da também para o CDJ 2000 (Não Nexus)?

Is possible change the jog xdj 1000 mk2 to a cdj 2000 nxs2?

hello, where can i buy the dsx1078? I'm having the exact same issue. Thank you so much for this video!!!

@DJlegionuk

4 жыл бұрын

what country ? in the uk buy from sbsav.co.uk/shop/

I know what you mean by the old sheet coming off easily on this one. Mine left all the glue behind. What a pain. It took me a good 30 min to scrape it all off. do you have any tricks for this?

@DJlegionuk

4 жыл бұрын

sorry, I normally use something to remove the glue and scrape it too. It was always very messy on the cdj 1000

Is this much different to a nexus 2 repair?

Hi, great video thank you. i have a different problem i wondered if you had come across. cdj2000 nexus, all seems fine but if you turn the jog wheel with any kind of speed the track then starts to go backwards! it works fine if you turn it backwards and slowly forwards is fine but put and speed on it and it gets confused. i have cleaned the little sensor and clear tracking wheel but still the same. Any help at all would be mighty appreciated. Thank you so much.

@DJlegionuk

2 жыл бұрын

sorry it's not a fault I have had. The wheel works as en quadrature encoder so it has a IR LED and IR sensor. as the light shines thorough that tiny disc with the very very smol lines it knows the direction and speed it's moving so if it moved backwards ok I am not sure why it does not move forwards

@mikerodbourne9459

2 жыл бұрын

@@DJlegionuk Hi, thank you so much for replying. no its very odd. i had a cdj2000 here as well so i thought id swap the sensor and the disk over to try it but it still does it. backwards fine. slowly forward fine, give it a spin and it goes stuttering backwards. no idea what to buy for this one 🙄 Appreciate your time replying though. thank you.

@DJlegionuk

2 жыл бұрын

@@mikerodbourne9459 start by swapping the top between two decks. Then I think the center display pcb does the encoding I am not sure so you could try swapping those too

@mikerodbourne9459

2 жыл бұрын

@@DJlegionuk well , gave it a go. and nope its not anything to do with that. most perplexed by it. the sensor on the cdj2000 has a slightly different part number to the nexus so maybe it is different and not backwards compatible. the nexus one works in the 2000 but maybe the 2000 sensor doesn't match the nexus! guess ill have to try and locate one to try. i dont suppose you sell spares lol.

@DJlegionuk

2 жыл бұрын

@@mikerodbourne9459 sorry I don't, you can buy pioneer parts from sbsav.co.uk

Great video! Do you think this would work with XDJ XZ?

@DJlegionuk

11 ай бұрын

HI, Yes I think so because that has the normal size platters. . Part number is DSX1078

Hello, I have the same problem, only that if I let the track start, in vinyl mode when I put a hand over the record the track stops, but it does not go back and forth the jog. Changing this piece back working ?

@billzremix

Жыл бұрын

did you figure this out ever? that's what mine is doing exactly

I'm having the same issue with my XDJ 700. Do they do replacement sensors for that model?

@DJlegionuk

2 жыл бұрын

HI, I am not sure how it works, I know it's a smaller platter and think it's different to the bigger ones.

did thhis to my xdj 100 mk2 and now it wont turn on :(

The same for a cdj850?

@DJlegionuk

Жыл бұрын

Yes it's basically the same for all cdj before the 3000. just check the correct part number first.

Da pra recuperar a antiga?

I try this but didnt work at all still have the problem any suggestions...

@DJlegionuk

4 жыл бұрын

trace the connections back, if replacing the pressure ring did not fix it then it will be a connection problem.

where can i order the pressure sensor from?

Is this Judge Jules with a wig on?