Thank you Chief! You have just improved my quality of life tremendously with something seemingly so simple. I have had a loose leaky faucet for a couple of years. My landlord didn’t want to send out a plumber for such a small job and I don’t blame him because I can’t imagine what it would cost just to put him in the driveway let alone fix something. I thought I would have to go under the sink and do something horribly technical to fix this problem and I have short arms. The handle was horribly loose and the only way to shut off the water was to pull it down and yank it hard to the right. It works beautifully now and I didn’t even need to purchase any parts. It’s a Christmas Miracle! Thank you!

Thank You Thank You Thank You!!!!! No nonsence video, showing absolutely clear suport on how to fix/retighten my old Moen single handle faucet, brilliant!!!!!

This was perfect, thank you! Once I found out that the standard size for the set screw is a 7/64 allen wrench, I had everything fixed in just a few minutes. Your video was super helpful.

@lisafeldman504

3 жыл бұрын

Thanks you! Getting the right allen wrench was the missing piece for me. So easy once I had the 7/64!

@appa609

2 жыл бұрын

of course... don't make it 1/8" or 3mm that'd be too easy...

I knew that I had to be missing something, as after tightening the Hex-key part it was still loose. Thanks, for sharing. All fixed up like new again!

Thank you, after seeing this I now know the problem might be the inside screw and not just the one holding the handle.

Thank you for saving me from having to call maintenance at 2 am.

Thank you! I just fixed my kitchen faucet after watching your video. I only had to tighten the outside bolt.

Thanks for the upload, had the handle tightened in a few minutes👍🏽

Thank you…….. for your kindness to share your knowledge and experience free with us you just saved me from buying 2 new faucets for 2 bathrooms 👍👍 your making a positive difference and helping many people around the world

THANK YOU!!! So happy I didn't pay my landlord $100 to come fix this. lol

Thanks Man.... Your the best.... Just rented a house and a lousy loose handle.... i thought is was bad.... now I can fix it.. Thanks.. Mike M

Thank you! This was nice & short & to the point! Had mine tightened in no time! I am grateful 💚

Thanks been watching other KZread sites this was spot on for me Showed me just what i needed & didn't take 12 minutes

thank you so much!!!!!!!!!!!! fixed my facet today in about 10 minutes. Much appreciated

Great musical score too!!!!

Brilliant! Nice and visual, very straightforward.

Thank you! Very informative!

Just worked the magic according to this video. Good as NEW !!!! Thank You

THANK YOU! Great straightforward video for an annoying problem.

Thank you so much. I was about to be in a bit of trouble this weekend as my apartments kitchen faucet is doing this rocking. I am scared to even wash my hands right now or my coffee cup. Going to go try this. Fingers crossed! Wow, it appears that plumbers cheat. It goes according to another forum directly to the boiler (radiator heat also). Thanks anyway. A relative used to be a plumber and the field has changed quite a bit - my how fields change.

Жыл бұрын

YES, YOU CAN.

@teresag2015

Жыл бұрын

@ I can't get either handle under the sink to budge. I suspected a plumbers lock but a forum said it goes to boiler in basement since its' radiator heat.

Жыл бұрын

Handle under the sink, Are you referring to the shutter valve? I pick up a clue from your writing. You said apartment. If true, you shouldn't be doing any unauthorized repairs. Plz consult with your landlord. If they refuse, pay a pro, keep a receipt and be refunded by your landlord.

Remember in USA when you put the plug back in the hot is on the left indicating which way to turn the handle for hot water.

This video was a great help. Thanks! Good music, too.

Thank you so much for making this video! 100% what I needed 👍🏼

Thank you!! God Bless

Thanks. Very straight forward.

THANK YOU!!

THANK YOU!

Thanks so much, you saved me calling someone in

Thank you for posting this! I have almost the exact same faucet, and the handle is loose. I tried tightening the screw and it was still loose, so I took that inner assembly out and noticed there is a plastic washer the screw goes through that was broken into two pieces. I tried putting a very thin plastic washer in between the two pieces, and reassembled, but it's still loose. Any ideas about whether or not putting the washer in a different place might help, or do I just need to get that part replaced?

4 жыл бұрын

You might consider replacing with the exact washer...if the problem persists then the hole is widened by the screw from 1000 of twists and turns...you can replace the whole assembly or keep on tightening it. Good luck and thank for watching...

@josephtarazi743

2 жыл бұрын

@ I put flat rubber washer and it works

You are the MAN, thank you so much! Exactly what I needed.

Thank you. This was extremely helpful

i will test this out

Great video, thank you very much! 👌

Thank you

I will need to try this. Do I need to turn the water off under the sink to do this?

4 жыл бұрын

Absolutely NOT.

Handy Video, Thanks a bunch!!!

My screw completely fell out and was lost. Do you know if I can buy a new screw and the tool to screw it in, or do I just need to buy the whole thing new?

4 жыл бұрын

U will get the exact screw at home depot , Lower etc... U need to know the name of the faucet. U can also buy an assortment of screws and look for the right one..NO, DON'T BUY ANOTHER FAUCET IF ALL U NEED IS THE SCREW. Also for tools, you will need a screw driver and the hex shown in the video- also at home depot...

Thank you I saw the other one now. Do you know the model no. and the screw in the middle I need to take out won't budge on mine and is starting to strip. Any ideas on how to unscrew it without stripping it?

3 жыл бұрын

The screw is stripping because the screw driver is either too big or too small. Moen. No model # needed. Go to home depot or Lowe's to buy MOEN repair kit. Take a picture of the faucet with you just in case someone there has to assist you.

3 жыл бұрын

Screw...may have corroded, add wd40 or similar and let it soak.

@bowerscott123

3 жыл бұрын

@ Thanks I will try penetrating oil when I get the o rings. I e mailed Moen and maybe they will send the o rings. Your video was very good. Many talk too much or don't get right to it. You do it right.

Thanks! Great video.

Nice!! Thank you! This will be helpful. Out of curiosity, what brand of water purifier do you have on your sink, and did it cost a lot? Thanks.

4 жыл бұрын

"Brita" can be found at WaltMart and home depot... Any other brand works as good as...

Knob not "nob"...lol!! Great help, thank you

3 жыл бұрын

Will correct...

Do I need to turn off the water for this job?

@joditripp7003

3 жыл бұрын

I saw the answer down below, thanks !

WHAT is this model? I have the same one but can't find the name. I need to fix more, leaking from the base......you did not go far enough and I can't take it apart from here

3 жыл бұрын

It is MOEN. Here a link where I did it all: kzread.info/dash/bejne/ipx1s8iYpq3LlbQ.html

😂😂😂😂why does it still looks loose

Ummmmmm. Metric or American allen wrench to take off faucet? Kind of helpful.

4 жыл бұрын

You know, the faucet is for american household use. The Allen wrench must be American...honestly I dont know. Go to home depot and buy a set...they all will be useful someday. Hope that helps...

@realcoolbreeze

4 жыл бұрын

Bric-á-Brac DIY REPAIR VIDEOS Yes. I went to Ace earlier and guessed/hoped American . Wife s cooking now so will find out tomorrow when I do the little job.

Mine came off lol I dread having maintenance in

3 жыл бұрын

Now you know how to tighten it

thank you very much