How to fix bad Euro-style hinges [video 410]
Тәжірибелік нұсқаулар және стиль
In this shorter video video I show how to #repair concealed (#euro-style) #hinges for DIY cabinet and wardrobe doors. Enjoy!
+++++++
My ‘social’ links in one place - bit.ly/10minute-links
Support me directly - bit.ly/donate_to_10minuteworkshop
Join my Patreon for additional, exclusive content- / 10minuteworkshop
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - amzn.to/2ePP4mz
Amazon US - amzn.to/2f03KD7
++++++++
Used/featured in this video:-
Dowel jig - amzn.to/3j0bD7V (US: similar - amzn.to/308RTpR)
8mm Dowels - amzn.to/2MHbxkk (US: amzn.to/2xlbJ31)
Hinge repair plate (NB cheaper elsewhere) - amzn.to/32fK9Fp (US nope, sorry)
Plastic packers - amzn.to/2vCDN27 (US:amzn.to/2vHk4fZ)
Maxitek Storm D4 adhesive - bit.ly/StormD4PVA
Flush cut saw - amzn.to/3j3RBcr (US: similar - amzn.to/2CBXNYM)
Pull saw - amzn.to/2Op1ljv (US: similar - amzn.to/3fnTT45)
Xacto knife set - amzn.to/2Kbt9oC (US (similar) amzn.to/2RWqEJs)
Xacto-fit saw blades - amzn.to/2WhRvo4 (US: amzn.to/3frcV9G)
Bradawl - amzn.to/2qWTbln (US: amzn.to/2pZqVRm)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Festool CXS - amzn.to/2syMO8Z (US: amzn.to/2r0TZ7U)
Other handy stuff:-
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Kreg hinge jig - amzn.to/2zyqQr7 (US: amzn.to/2L6dvgl)
Festool MFT SP fixed clamps - amzn.to/2yAKHqi (US: amzn.to/2gQ2Neg)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Moldex 6810 in-ear defenders - amzn.to/2sTwQJE (US:amzn.to/2sThGo1)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Mirok square - etsy.me/2MC0RTZ
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Trend Air Stealth Facemask - amzn.to/2zah0P6
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Plastic packers - amzn.to/2vCDN27 (US:amzn.to/2vHk4fZ)
Braided hose sleeve - amzn.to/2puFkWd (US:amzn.to/2oqbQsi)
Polyvine PolyTen PVA - amzn.to/2HBxK66 (US: amzn.to/2rmHYL3)
+++++++++
Пікірлер: 462
Props for the “oops” shot of you blowing out the far side. That was just outstanding!
@10MinuteWorkshop
4 жыл бұрын
Haha, thanks! 👍
@katabrontes
4 жыл бұрын
Peter Millard Hi Peter, Better to use the depth stop when you drill out the dowel as well? Mike
Had a corner cabinet door in my kitchen fall off last week. Ordered the hinge plates, which arrived on Friday, and installed today. Feels even stronger than when it was screwed directly into the wood. Thanks for the instructional video sir!!!
I actually think the quick dirty way is a lot more durable. I would prefer to this method for home fix. Nice video, and thank you for sharing.
What a wonderfully well explained video. Simple and to the point. Thank you. I'll get onto that job I've been avoiding now. Think I'm going to be lazy & go for the second method.
exactly what happened to my old cabinet vanity door, in bath, circa 1975. I'll use the dowel method. THANKS, PERFECT!
You are a wealth of information Peter and a likeable chap. Thank you for all your input over the years👍🏻
@10MinuteWorkshop
4 жыл бұрын
Thanks Wayne! 👍
Great video as usual, Been using them metal plates for ages but think I’ll step it up with dowels, loved the out takes
This has helped me loads as this happened to me this morning whilst making my morning brew, this will be my project for today thank you 😊
I've just repaired 2 wardrobe hinges - checked out your video as I was thinking of using dowels but then I read Jason B's post below (3rd method). I remembered I have a box of different sized threaded insert nuts (cheap on Amazon). It was so easy and clean - just a slight drill out of the hole, fit the insert nut and tighten with an allen key and then screw the hinge into it. No cutting or gluing - it took longer to get the tools from the garage than to do the job, brilliant!
Peter my darling you are the best!!! You saved my day , love you my DIY man 🤗
Thank you so much for this video! I was about to go and buy new wall cabinets for my council place. This is a much cheaper fix!
Fantastic Peter. Door dropped off yesterday. Used the first method, had all the right tools etc and done in about 4 minutes. I subscribed. Thanks
Hi Peter. As an avid follower of your channel I remember seeing this video some time ago and so when it came to having to repair some kitchen cupboards I followed your instructions and the repair on both cupboards was a breeze! I used the dowels to repair the hinges. It’s simple and perfect. Thank you so much. What a great tip! K
@10MinuteWorkshop
2 жыл бұрын
Thanks Kevin! 👍
Hi Peter, just wanted to thank you. I watched this at the time, but didn't need it. Now I need it, I watched it again - perfect solution!
@10MinuteWorkshop
Ай бұрын
Glad it helped! 👍
I watched this, brilliant, I knew the kitchen cupboard door needed attention, ordered some dowels from your below list and one of those flat saws. Went down to see how bad the damage was and the bloody door came off in my hands. Quick fix, used some masking tape on the drill to note the depth and also used a couple of rawl plugs as a temporary measure, solid as a rock now, will use your method in the New Year. Thankyou for putting this video up, really helped me, would probably be getting an ear-full from the wife if I had not watched this and been able to immediately fix. Have a good Christmas.
As someone who almost doesn't know the handle from the bangy bit of a hammer, I'm really impressed with this video. I saw a plate advertised on Twitter, but needed more detailed instructions. Thank you so much. I can feel a visit to a hardware store coming on in the near future.
@10MinuteWorkshop
2 жыл бұрын
Thank you! Oh, and the bangy bit of a hammer is usually at the heaviest end. 👍👍😂
Now that is a very useful video. Perfect for my old kitchen units that I’m going to upgrade, repair and repurpose for the workshop! Thanks Peter.
@10MinuteWorkshop
4 жыл бұрын
Cheers Martin! 👍👍
Quite simple and it worked wonderfully. Made the wife happy
Thanks so much, I'm feeling a lot more confident for this exact upcoming job.
Thanks for that Peter never even heard of the repair plates so that’s a bonus and something ‘learned today’ off my daily task.👍 I have used dowels before but have also had success using two part epoxy putty which goes off in less time than glue takes to dry.😀 The bloopers bear witness ( in small part) to the time taken in putting these videos together.
@10MinuteWorkshop
4 жыл бұрын
Haha, thanks Norman! I’ve had 2-pack resin repair pull right out of older cabinets so I generally prefer dowels, but whatever works! 👍👍
@boldford
3 жыл бұрын
@@10MinuteWorkshop The snag with a conventional dowel is you are drilling and screwing into end-grain. It's far better to use a proper wooden plug.
Another 2 things I’ve learnt and damned usefull as I’m currently rehanging kitchen doors that have been abused by tenants, thanks
Quick n dirty method (Hafele hinge repair - screw fix) worked a treat for my larger cupboard door. Thank you for your professional demonstration.
@10MinuteWorkshop
3 жыл бұрын
Good to know, and appreciate the feedback, thanks! 👍
7:44 Subtle. Very subtle. This is why I enjoy your channel so much!
@10MinuteWorkshop
4 жыл бұрын
😆👍👍
Thank you for this clear and instructive lesson.
option 1 it is. a great vid and well delivered, thanks Peter
Amazing video, professionally explained, keep up the good work, many thanks
Ten out of ten as usual. Never seen those repair plates before, but they look pretty good. They might keep my old kitchen units going until I get around to replacing them.👍
@10MinuteWorkshop
4 жыл бұрын
Thanks 👍
You made by day Peter - didnt knew it could be so easy to fix... thanks for the video
Thank you so much! I'm from Italy and tried to repair my wardrobe following Italian tutorials, but nothing worked. Very very helpful ❤
You have explained this very well. Thank you very much.
Clear and concise, very helpful, many thanks.
Just what I needed, and well explained, thank you
I was aware of the fixing plates but the elegant repair is genius. Great video, thanks.
@10MinuteWorkshop
4 жыл бұрын
Thanks! 👍👍
Used the dowel method to repair two soft closing hinges and all went beautifully. My sincere gratitude!
@10MinuteWorkshop
Жыл бұрын
Glad it helped, and thanks for letting me know! 🙌👍
Just in time as I was struggling with a refurb for an Ikea cupboard at the weekend. Thanks. it works!!
@10MinuteWorkshop
4 жыл бұрын
Good to hear it! 👍👍
Was stuck in b&q deciding what to get, went with the hinge repair plate as I wasn’t too bothered ! Thanks !
Very informative, thanks Peter! Loving the outtakes.
@10MinuteWorkshop
4 жыл бұрын
Thanks Sammy! 👍👍
Great video, great delivery, really useful thanks.
Lifesaver! Thank you. Excellent video.
Perfection as always PM - loving the out takes 🤣
@10MinuteWorkshop
4 жыл бұрын
Thanks Gary! 👍👍
Great video as always! It was chock full of great information and tips, but short and to the point.
@10MinuteWorkshop
4 жыл бұрын
Thank you! Sometimes I just want to get right into it, 10-minutes be damned, lol! 😂😂👍👍
This is exactly what I needed. Thank you sir.
Thank you for this clear and perfectly explained procedure!
@10MinuteWorkshop
3 жыл бұрын
Thanks! 👍
Many thanks, I've just done the ' dirty ' repair, very simple and fast to do. I got mine from Toolstation this morning but surprised the back plate isn't flat?!still done the job ok. Great video and thanks for the tips 👍 ( love the ending if your video 😂 )
Thank you for sharing your great ideas
A really handy video for future use. Thanks. Love your videos by the way.
@10MinuteWorkshop
4 жыл бұрын
Thank you! 👍
What an interesting and informative video. I had never heard of hinge repair plates. I can now fix some of my wonky cabinet doors.
@10MinuteWorkshop
4 жыл бұрын
Thanks! 👍👍
@christengemeentemiddenlimburg
4 жыл бұрын
Never heard of these repair plates as well. Thanks for the video Peter!
@gervanderkamp1156
4 жыл бұрын
Oops, wrong account, but many thanks Peter!
Great video, straight to the point.
I actually have one I need to fix on our kitchen sink unit. Used to have a bin in the back of the door so took extra load... Probably going to replace the existing one with a blum and use the dowel version! Thanks Peter
Great video, thanks for this content 👍🏻
Thank you for these 2 options!
I find the the near F-bomb blooper hilarious well crafted video
this is just what i need. awesome video
Thanks for the video, was thinking dowels alright for a repair job on a large cabinet but thanks for tips on things I would have missed
Thanks very much for the very well explained video
Thank you. My cabinet door is now fixed after a long time. I used the quick and dirty repair.
This is so helpful. Thank you!
Brilliant! So helpful for a lady living alone
This will come in handy one day! Thanks!
@10MinuteWorkshop
4 жыл бұрын
👍👍
I have this very problem in my french cottage so next time im visiting i will be trying the dowel method. Many thanks for the tip. Regards Col.
@10MinuteWorkshop
4 жыл бұрын
Thanks Col! 👍
Great tutorial !
Great tips, and I love a good outtake!
@10MinuteWorkshop
4 жыл бұрын
Thanks! 👍
Excellent video, I never thought I'd be able to fix my cabinets, kitchen cabinet under sink has same problem. Thanks
Great video Peter, I used to do a lot of these repairs for stores , the depth stop on the drill is really important I’ve unfortunately made that mistake more than once and caused myself a lot of extra work usually when I was in a hurry , keeps life interesting , Have a great weekend.
@10MinuteWorkshop
4 жыл бұрын
Thanks! Yeah, makes for a long old day doesn't it? 😂👍
Thanks for the video. Incredibly helpful content.
@10MinuteWorkshop
3 жыл бұрын
Thank you! 🙌
Love the bloopers.. great informative video..
Excellent video . Thanks from canada.
Great job peter you never stop learning in woodwork 👍
@10MinuteWorkshop
4 жыл бұрын
Thanks! 👍👍
Jobs a gooden cheers Pete. 5 minute fix well happy
Very helpful. Thanks mate.
Thanks. Repaired a cabinet door in our kitchenette at work. Used the plate method on Home Depot cheapy cupboards. Was easy peasy with my little cordless drill. Definitely toss original screws and use supplied screws though. Tried with original ones and that caused some confusion then I watched again and you clearly say use supplied screws 😁 Got plates off Amazon.ca 6 plates and screws for about $20.
Great video. Very useful
I keep a few varied diameters and lengths of vinyl and rubber hose in my tool box for emergencies , I've used them at times as drill stops. Cut the hose long so that one end rests against the chuck face while the drill bit end is cut for your desired depth.
@10MinuteWorkshop
4 жыл бұрын
Always a good trick! 👍👍
Thanks really useful, simple and easy fix ,just done my kitchen cupboard
Great video as always! That clip of you drilling all the way through really tickled me 🤣🤣
@10MinuteWorkshop
4 жыл бұрын
😆 Thanks! 👍
This is amazing, now I can easily fix my kitchen cabinet.
@10MinuteWorkshop
4 жыл бұрын
Glad I could help! 👍
Thank you for this video. I am about to go with Option 1
Absolutely brilliant tips. Thank you.
@10MinuteWorkshop
4 жыл бұрын
Thanks! 👍
Excellent explanation.
Great info! Thank you.
Love the bloopers reel 👍
Very useful, many thanks 👍
Really well presented video buddy... Very easy to follow and watch! 👌🏻👍🏻👍🏻
@10MinuteWorkshop
2 жыл бұрын
Thank you! I enjoyed your old movies too! 👍😂
Repair plate . Very helpful , Thank-you
Nice tip, many thanks!
This is gold thank you!
You’re a legend mate
Great tip's Peter Thank You and Stay Safe !!!.
@10MinuteWorkshop
4 жыл бұрын
Thanks Brian! 👍👍
Thank you... great video. Followed you instructions and the results were perfect. Saved myself a few dollars IF I could even get someone to come and fix it.
@10MinuteWorkshop
3 жыл бұрын
Thanks! Glad it helped! 👍👍
very helpful video thanks
Great informative video thanks 👍
A big thanks for sharing from Virginny!!!!!! You Da Man!!!
Great video man.. honestly great content and info and that oooops shot had me 😅😅😅
The plates work well. Thank You.
Very Helpful. Thanks.
Amazing help thanks.
This video should be issued as part of the welcome pack for all new build houses such a smart idea using dowels 🙌
@10MinuteWorkshop
3 жыл бұрын
Thanks! 👍👍
Followed your instructions almost to the letter and surprised myself that it actually worked and I was able to re-fit the hinges and re-hang the door (vertical cupboard door.) I am not in anyway an expert at DIY so thanks for the tips. Now I have an almost full bottle of wood glue left that will probably go off now it has been exposed to air and a bag of 8mm dowels that I have no further use for. Oh well.
Very useful video. Now I know exactly what to do.
Thanks for the tips. I'm actually going to use this next week on a repair. ... I burst out laughing at the outakes! Thanks for the giggle!
@10MinuteWorkshop
4 жыл бұрын
Thanks Gary! Glad you enjoyed it! 😂👍