How to fit a tail tidy to Husqvarna 701. KTM 690 tail tidy install. GasGas sm700 tail tidy fit.

Автокөліктер мен көлік құралдары

In this video I show you step by step how to fit the husqvarna licence plate holder (tail tidy) to a husqvarna 701sm however the installation is exactly the same for a KTM SMCR 690 or the GASGAS sm700.
For the tools and products used in the video click here:
¼ torque wrench (5-25Nm) - amzn.to/3ZvJZUs
Hex bit socket set (metric) - amzn.to/3Kewgg1
Socket set (metric) - amzn.to/42KuWZM
7 piece ratchet spanner set - amzn.to/3nJYeHU
Makita Impact Driver, Drill plus batteries - amzn.to/2txC1Rn
Makita LXT angle grinder - amzn.to/3ntp5EH
Metal cutting disk - amzn.to/3LqcDkG
Side cutters - amzn.to/3nk2fDa
ZIP ties - amzn.to/44dnVBs
Tail tidy - Part number 27008915044
SUBSCRIBE HERE:
/ @pouseouttathehouse
For my other channel click here - / pousearoundthehouse
The Amazon links above are affiliate links. As an Amazon associate I earn from qualifying purchases.
Don't forget to LIKE, SUBSCRIBE and click the bell symbol for regular POUSE outta the HOUSE notifications!!
#husqvarna701 #tailtidy #licenceplateholder #husky701 #ktmsmcr690 #gasgassm700

Пікірлер: 27

  • @POUSEouttatheHOUSE
    @POUSEouttatheHOUSE11 ай бұрын

    If you watched and enjoyed this video, and haven't done so already it would really help me out if you LIKE the video and SUBSCRIBE to my channel. Thanks for watching 👍

  • @Robbiemoto

    @Robbiemoto

    10 ай бұрын

    You have another sub 👍🏻

  • @mikef3300
    @mikef3300 Жыл бұрын

    You guys across the pond have so many cool parts available for the 690-701 platforms but I definitely don’t envy the huge license plates you have to run on your bikes.

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    The plate I've ordered isn't too bad but as standard the are pretty big! Thanks for watching 👍

  • @kennerfx
    @kennerfx6 ай бұрын

    Helped me alot with my '23 Husqvarna 701 Supermoto! Can't get better than this. Thanks!

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    6 ай бұрын

    Glad it helped, happy riding 👍

  • @digger8180
    @digger8180 Жыл бұрын

    Good post, thanks👍

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    Glad you liked it 👍

  • @MV-vv7sg
    @MV-vv7sg Жыл бұрын

    Brilliant Video as always. Thanks. Think I’m going to try the DIY Tail Tidy using half the ‘mud guard’ plate holder. Will see what the law says but may end up getting one of these myself.

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    The only downside of using the half mudguard option from what I can see is you have no separate plate light, the angle of plate may not be compliant with various country's laws (Not sure?), and it's maybe not as strong. I'd put a blob of sealant in the hole in that grommet also to prevent water getting into the electrics. Other than that, give it a go and let me know how you get on with it. Thanks for watching 👍

  • @MV-vv7sg

    @MV-vv7sg

    Жыл бұрын

    @@POUSEouttatheHOUSE Yea you speak exactly of the small things I’ve considered, good pointed about the grommet / hole for the plate light cable.. In the UK as well, so hoping that it being around 30 degrees isn’t too much of an issue with the boys in blue. Know a 701 Enduro rider who’s had it like that for 2 years with no issues. Definitely not going to its MOT like that though! Interestingly it was the Salesman at the KTM Centre / Husky1903 that brought it to my attention! Will let you know how it goes and if I end up getting a tail tidy. Many thanks again, really enjoying the professionalism and entertainment of your vids.

  • @RichardKronawetter-yk1qz
    @RichardKronawetter-yk1qzАй бұрын

    Can't see where you made that big a difference. It kinda looks like the stock one

  • @Robbiemoto
    @Robbiemoto11 ай бұрын

    I found removing the fuel cap helps with taking that rear panel off.

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    10 ай бұрын

    Thanks for the feedback Robbie . Some great videos on your channel. I see you sold your Husky. I've bought a Wings exhaust, DNA stage 2 filter and my plan is to fit soon and get the bike mapped. How did you get on with your wings set up? Thank for watching 👍

  • @Robbiemoto

    @Robbiemoto

    10 ай бұрын

    @@POUSEouttatheHOUSE Thanks. I appreciate that. I did sell the husky with some regret lol but I went and got a 23 690 smc r a couple of months back and I’ve done the same mod. Wings exhaust and CRT fuel optimiser. It’s made a huge difference to the 690 as standard it was really lean low down. On the Husky I didn’t really ride it that much before I did the mods to it so couldn’t really compare but as that was a 21 Euro 5 model like the 690 I’d say it probably ran the same.

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    10 ай бұрын

    @Robbiemoto I noticed you'd bought a 690. Fancied a change of colour? 🤣 I saw one like yours on the road for the first time the other day, nice colours 👍 Thanks for the info on the husky. Mine definitely runs lean at times. I'm hoping a remap will sort it out. Just need to find time to get it all done now!

  • @Robbiemoto

    @Robbiemoto

    10 ай бұрын

    @@POUSEouttatheHOUSE I sold the husky purely being offered good money for it. After seeing strapped to a trailer and going down the road I thought bollocks I shouldn’t have done that lol. I got the 690 by chance. Speaking to the dealer I got my 1290 SDR from and they were selling their demo bike a couple grand less than brand new price and it only had 175 miles on it. So bosh I had it lol. I will eventually get it remapped but for now and the cost of it the fuel optimiser does the job very well.

  • @flash573
    @flash573 Жыл бұрын

    What dimensions is your new number plate?

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    5x7 inches. Are you a police officer? 🤣

  • @flash573

    @flash573

    Жыл бұрын

    @@POUSEouttatheHOUSE😂 no no quite the opposite

  • @allanrobinson621
    @allanrobinson621 Жыл бұрын

    Ive just fitted a 7x5 plate. Lets see what South Yorkshire police think of it!😂😂😂

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    I'm sure you'll be fine, let me know! Thanks for watching 👍

  • @ianjames3078
    @ianjames3078 Жыл бұрын

    Your number plate hasn’t got any numbers or letters on it, is that legal? Your paving joints need a bit of work, the moss will take over if you don’t keep on top of it. No thanks needed 👍

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    It was cheaper to purchase without the numbers and letters. As for the driveway, just doing my bit for the wildlife!

  • @carlbrutananadilewski8395
    @carlbrutananadilewski8395 Жыл бұрын

    Finding the part is the hardest...part.

  • @POUSEouttatheHOUSE

    @POUSEouttatheHOUSE

    Жыл бұрын

    In the UK I got mine from Fowlers in Bristol. They order from husqvarna. They had no issue. Maybe try Husqvarna direct as it's on their website under the technical accessories list. Hope that helps. Thanks for watching 👍

Келесі