How To - Fit a rear tubeless trials tyre
Спорт
Tyre changes can be done at the shop but you could save some money and do them from home with a couple of simple tools. Craig shows us how to change a rear tyre from his home with the basics!
Want to know how to maintain your trials bike but don't know how? Then comment below what "How To" video we should make next!
Website - bvm-moto.co.uk/
KZread Channel - kzread.info/dron/7Bn.html...
Facebook - / bvmmoto
Instagram - bvmmoto?hl=en
Twitter - bvm_trialsport?la...
Spotify - open.spotify.com/show/63k0Zfp...
Support us by wearing our gear! - bvm-moto.co.uk/index.php?rout...
Пікірлер: 42
Thank you for this video! I just replaced my front and rear tires on my montesa for the first time in my life. Subscribed. Thank you from Canada.
Also a video on setting the bike up for taller riders. Bar height and width. Etc.
Thank you for the video. If you don’t have a tire mousse I used a 16 inch tube and it helped a lot.
How about a video on adjusting the front fork clickers? Like how to make the forks softer using the clickers! 😁
Keep up the good work Craig
Thanks Craig, enjoying your vids.
Great video! Thank you!
Absolutely splendid
@bvm-moto
Жыл бұрын
Hope it helps
This will help out many 👏🏻👏🏻👏🏻people 💪
Great tutorial and helped me loads. 👍🏻 Please could we get a front tyre (tube) change tutorial? 👍🏻
Thanks Craig, I've changed loads of tubed tyres, but always thought there was more to changing tubeless ones . Looks like I need to buy a moose then I'll be well away. Thanks again & I'll look forward to seeing you up here in Jack Wood country next time around
@bvm-moto
4 жыл бұрын
Yeah it really isn't that hard a job as long as you have some of the correct tools! The moose makes it so quick and easy
Thumbs up Craig!
Great video. Love the GoPro mouth mount, hope it's not permanently fixed.
@bvm-moto
4 жыл бұрын
The camera prevents Craig from putting sweets in his mouth!
thanks
That’s great. But how do you change a broken valve? As in the threaded tube has cracked.
Hey great video, I followed step by step, only trouble is, the moose pops out in one place and so does the air. Any tips on that. Thanks
@bvm-moto
3 жыл бұрын
Try and put some pressure with your hand on the part of the moose that keeps popping out. You dont need to stick your fingers in there, just use the palm of your hand to keep the moose down in that spot
Mate l have returned for knowledge your website doesn't have the Buzetti 170mm set of three tyre levers for sale or if it does they are not showing up just thought I'd tell you 🍻🍻
@bvm-moto
4 жыл бұрын
They have run out of stock of that lever but tere are more available here bvm-moto.co.uk/index.php?route=product/search&search=tyre%20lever
I have returned with an honest question was the old tyre that bad you couldn't use it any longer. l ask because l now have my bike yet to ride it do they really lose so much grip it looked ok ?🤔
What size is the O-Ring Bead Seater ?
I am used to MTB tubeless rims and tyres. Do you not use any tubeless fluid?
@bvm-moto
Жыл бұрын
No, the tyres are much firmer so don't seem to seal properly when trying the fluid sealant. And the pressures are much lower in trials tyres.
What tire do you recommend Craig
@bvm-moto
3 жыл бұрын
Craig normally uses Michelin X-light but weill use Michelin X11 in the SSDT or IRC if its a extremely muddy trial
Hi I'm having an issue with trials tire going flat when riding a rocky terrain at low pressure. Reinflating helps. Any hacks for that beyong just carrying a pump around :)? Bead sealer perhaps?
@bvm-moto
Жыл бұрын
What tyre are you using and what PSI do you normally run?
@maxazarov9637
Жыл бұрын
@@bvm-moto It's Kenda 4.0-18, I usually run 6-7 psi when riding trails.
@bvm-moto
Жыл бұрын
@@maxazarov9637 We have never used that tyre so not 100% sure. It might have the same issue as the IRC where it burps air. Watch this video as it might help kzread.info/dash/bejne/l4Z3zLmQmabNd8o.html
how do you remove the valve?
@bvm-moto
4 жыл бұрын
You really need a specific valve core removal tool. they can get damaged very easily if your not careful.
Good idea to use soap when removing old tyre
What's the name of the puppy?
@bvm-moto
3 жыл бұрын
Poppy
What brand tire soap do you use?
@bvm-moto
9 ай бұрын
We like to use Putoline tyre soap as it seems to work best bvm-moto.co.uk/index.php?route=product/product&product_id=3358&search=tyre&page=2 But if you cant find this locally you can use household washing up liquid, just make sure it doesnt contain any salts that could corrode the rim!
Your website doesn't adjust for phones just saying.