How to Enable AHCI Mode Without Reinstalling Windows, INACCESSABLE_BOOT_DEVICE Error 💻🛠️🤔
Ғылым және технология
👍 Watch how to enable AHCI mode for a computer where an operating system has already been installed.
How to Enable AHCI Mode for SATA in BIOS without Reinstalling Windows: hetmanrecovery.com/recovery_n...
Content:
0:00 - What are IDE and AHCI?
0:52 - How to check if AHCI mode is activated
2:32 - Activating AHCI Mode
4:46 - What to do if errors occur when starting Windows with AHC mode?
The SATA interface can operate in two modes, IDE and AHCI:
• IDE - a compatibility mode for older equipment and software. In fact, in this mode SATA capacity is no different from its predecessor, ATA (or PATA) interface;
• AHCI - a new mode for memory devices, where a computer can use all SATA advantages, primarily higher speed of data exchange with SSD and HDD as well as hot swapping of hard disks. When you activate AHCI mode, it increases the speed of access to files in memory devices and improves overall performance of your computer.
Watch another video on our channel to see how to enter BIOS or UEFI in your PC or laptop - • Как войти в BIOS или U... .
Watch one of the videos in our channel to learn how to update BIOS - • Как обновить BIOS ASUS... .
All methods to boot Windows in safe mode are described in detail in this video by our channel - • Как загрузить Windows ... .
If you liked this video, click the Like button below and subscribe to our channel to see more. We’ll be glad to answer any questions in comments. Thank you for watching and good luck!
Пікірлер: 179
Second method worked for me. Thank you so much. Much easier than editing registry values.
Method 2 worked like a charm and was dead simple. I did take care to clone my OS to another drive just in case, and did a test run WITH the clone. But it all worked out. Did it with my original drive/install, and all is well! Thank you SO much!!
Is there any difference in performance if AHCI is enabled before installing windows or if AHCI is enabled after installing windows (and applying the fix) ? Is there any other reason for recommending to install windows after enabling AHCI, beside the Blue Screen if otherwise ?
【need some help】I have a old Compaq C707TU laptop(updated BIOS) running Windows 7 Enterprise. There's no AHCI option in the BIOS. There's only one option similar to this i.e. "Enable/Disable SATA integration". It is currently Disabled. And this method is not working. Although my HDD is SATA1 type. PLEASE HELP ME HOW TO ENABLE SATA INTEGRATION OR GET THE AHCI OPTION.
I had AHCI enabled before I installed Win 10 but my SSD still runs with AHCI deactivated acc. Samsung magician. Any idea why and what to do?
hi so I just installed my ssd..and follow ur second step.. in order for my laptop to use the ssd as main boot performance instead of ssd. do I just need to change RAID on to ACHI? or is there something else to do to use my ssd as OS?
in my pc, in device manager - IDE ATA/ATAPI Controller, i dont have driver called AHCI, but it have "Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0", is this also means AHCI mode is enabled?? in bios, there is sata operation and i set it to enhanced, instead of compatible and disabled. no AHCI text anywhere in bios to tell me if AHCI is enabled or not.
Hi, I have a really old pc, with legacy bios I used your instructions and worked like a charm. At first after I restarted my pc it would not boot, since I'm on windows 10 it went into repair mode and after that I could log into windows. As mentioned I changed IDE to AHCI, I looked in device management and there AHCI was enabled. I have an ssd and finally I can feel the speed. Thank you so much.
@galeanoj2005
3 жыл бұрын
I have not AHCI option too, then I could do it ? I am running Windows 10 in a SSD without AHCI I believe I am going to see the configuration of win 10 in my PC..I am in Win 7 now.. Uhmmm interesting.....
@prashantyadav4973
2 жыл бұрын
@@galeanoj2005 I also don't have option of AHCI what can i do
May i ask if its just normal to have windows get blue screen after enabling ahci? Then after i restarted twice it started repairs then i was able to boot to safe mode. After that i restarted it to normal and ahci is enabled.
Followed Method 2 and it worked nicely. A big time saver. Thanks a ton!
Worked magically for me, I tried to install dual-boot systems Ubuntu and win10 on my dell latitude 5510, switched to AHCI mode to install Ubuntu, and later fixed the windows boot issue following this tutorial. Thx so much!
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
where do I find the SATA settings to select the mode for memory devices? I feel like I'm missing something important here. After the part of closing the regedit, you said to restart. I restarted it and then you said to go to UEFI or BIOS, do I do it, with safe mode or the normal way? I don't know where to find the SATA setting to select the mode for memory devices. I'm sorry ☹️☹️☹️
Thanx man. It worked for me. I didn't have no idea how to activate ACHI in my PC until now.
The last method was very easy. Thanks!
Send method not working did in safe mode command bcdedit The set command specified is not valid ? Please advice
thankyou.. i'm working on a clients OLD laptop.. swapped in a SSD drive, system was on ATA. did your 2nd method, upon first boot after inserting BCD command, it blue screened n auto restarted n then went into safe mode all on its own n installed the SATA AHCI driver.. then I did the BCD 2nd input and restarted, started normally into windows 10 n AHCI.. perfect.. I've got this page BookMarked for sure now.. 👍😉
Hetman Recovery, Your help is very much appreciated. Worked like a charm and was easy to perform thanks to your clear description.
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
In registry folder iaStorAV I got nothing no parameters or startoverride any advice please
Also, does this methods work on HP xw8400 workstation?
I want to.enter in bois setup but it not entering setup and gibe same error AHcl not installed
hey can anybody help me... this video is based on ide to ahci, and i have ahci and rst with optane, at present i am running windows 10 with rst with optane and now i want to switch it to ahci, So do i need to follow this same steps described in video?? and what if something bad happened, i mean how to recover old windows if something screwed
hi, i have a problem, i have asus prime b365m-k motherboard with 9400k processor without integrated video card, with asus gt 710 video card! in the bios of my asus prime b365m-k motherboard i don't have the ide or ata selection, i only have ahci or intel raid! when i try to start an old windows xp or w7 operating system of my old pc that has another motherboard i get the blue screen with error 0x0000007b! I wanted to know to solve the problem and start the system of the old pc without making a new installation do I have to change the motherboard that has a sata configuarazione with ide selection? or the problem would be the processor without integrated video card that gives me the blue screen when loading w7 of the old pc or new installation of an old operating system such as windows xp? can you help me solve the problem and recommend a motherboard that has the sata configuration ide? thanks
Can AHCI be enabled during a win install, or just before?
Worked great thanks, appreciated
I couldn't find the AHCI option in the BIOS of my 10 year old HP Pavillion DC5800. Anyone know where that option is? I've just bought a new SSD and it is sitting unused inside my PC . How do you do you install AHCI in to a PC? This is where a PC can be annoying. An SSD is just another storage disk which my PC should recognise without making me have to work. Any tips anyone?
Second method worked like a charm. Thanks!
@HetmanRecovery
Жыл бұрын
We're glad we could help you )
Sir, i there's no menu to change ACHI on my laptop BIOS, could you please help me. Thanks
Thank you very much. The second option worked. Didn't realize why my computer wouldn't start after hours and a few more gray hairs from windows update. Thank you windows for reminding me why i switched to Linux!
Thank you sir! you helped me about this because my windows 10 is randomly freezes. after enable ahci in my legion y520 its working like charm. no more freezes happen. thank u again! appreciated!
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Method #2 worked brilliantly! Thank you!
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
The second way works for me. Thanks my dude!
The Second method worked for me thank you !
Valeu! Estava sofrendo aqui com este problema... Ajudou imensamente! Obrigado!!!
The work of an expert 😉 In the bios of my PC (Dell vostro a860) I can't find any section Where I can change from IDE to AHCI, all I can find in the bios are informations and settings about vidéo, battery, performance... Ect Probably my PC doesn't Support the AHCI mode! What do you think ? Thanks
Method 2 was a winner. Thank you.
@HetmanRecovery
Жыл бұрын
We're glad we could help you )
Since I'm using a newer Win version, went for METHOD 2 and it worked like a charm. Thanks !
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Thanks a lot. It worked for me. Came back to show my gratitude.
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Can the second method be used if my sata controller is set to RST instead of IDE? I have a Lenovo 256 SSD, the BIOS Sata controller setting is set to RST. When I tried to switch to AHCI, it said that doing so will erase all current data. Is there a way to change to AHCI and keep all my current data?
@HetmanRecovery
4 жыл бұрын
It's working and don't touch
will this work for UEFI?
2nd method worked for me, thank a lot.
Thank you. Using CMD worked very well for me.👍✔
Second option worked like a charm,thanks a million 👊😎
@HetmanRecovery
3 жыл бұрын
Glad it helped
Method 2 worked pretty well thanks
Thx a lot: it work like a charm ! (method 1) FINALLY i got AHCI enabled without BSOD ! Great job: keep up the good work !
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Thank you very much ! Finally it worked for me :)
@HetmanRecovery
Жыл бұрын
Glad our video was useful to you)
Hi there. I am using Intel core 2 duo processor which is 64 bit and supports ahci with sata 2 connection. What I have noticed is in regedit setting instead of iAstoreav for my pc it is showing as "iastoreavc" is displayed but content 0 is available. What can I do here? What is the major deference? Also when I opened 0 it mentioned the same value as yours "3"which you asked to change to 0.
@HetmanRecovery
3 жыл бұрын
I have never encountered this before ...
@roninr8199
3 жыл бұрын
@@HetmanRecovery for some reason I couldn't do partion in disk management so did a fresh install.
As in the comments. I went straight for method 2. And omg. Not only it does work. It became much faster. Never tried ahci in my life that's why. Only for the ssd I bought yesterday i knew i should change it. Great video. Thanks
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
THANKS DUDE Workwell and nice
@HetmanRecovery
Жыл бұрын
Always glad to help)
1:58 ..well ..I changed it and got bsod...can I somehow reanimate my system? Any links/advice? Please =)
@HetmanRecovery
4 жыл бұрын
Discard changes, or go to Windows recovery mode
2nd method worked for me! Thx a mil!!!!
@HetmanRecovery
Жыл бұрын
We're glad we could help you )
I read your article and can not comment ....I have an old machine with mother Gigabyte M68MT-S2P Nividia GForce 7025 Rev A3 nForce 630a Rev A2. The Bios do not have option for AHCI, (Award Software International Inc F1 12/24/2010) in Windows 7 all is ATA there is not AHCI. I have too a SSD disk and there I installed Windows 10 without any problem, How do yo say that we can not to install a SO in a SSD without AHCI ? I could. and Windows 10 is running ok--..My Bios do not have any more updates....finished in 2010...Perhaps I will search If I can change the Bios chip?? My mother say Bual Bios 3TB+ Hybrid EFI Technology, but the Award do not show nothing....Thanks
I cant start my windows bro,when i start screen this "reboot and select proper boot device or insert boot media in selected boot device and press a key"... My bios is default and default set ahci...
@HetmanRecovery
8 ай бұрын
The error message you're encountering, "reboot and select proper boot device or insert boot media in selected boot device and press a key," typically indicates that your computer is having trouble locating a bootable device. This could be due to various reasons, such as a disconnected or faulty hard drive, incorrect boot order settings, or a corrupt operating system. Here are some steps you can take to troubleshoot and potentially resolve the issue: Check Boot Order: Access your computer's BIOS/UEFI settings. You can usually do this by pressing a specific key during the initial boot process, such as Esc, Del, F2, or F10. The key to access the BIOS/UEFI varies depending on your computer's manufacturer. Once in the BIOS/UEFI, navigate to the "Boot" or "Boot Order" section. Ensure that your hard drive (where your operating system is installed) is set as the first boot device. Check Hard Drive Connections: Open your computer case (if it's a desktop) or check the bottom/side panels (if it's a laptop) to ensure that the hard drive cables are properly connected. If you have a laptop, you may want to contact the manufacturer for assistance, especially if it's still under warranty. Test the Hard Drive: If possible, connect the hard drive to another computer to check if it's recognized. You can also use diagnostic tools, such as the manufacturer's disk diagnostic utility or third-party tools, to test the health of the hard drive. Check for External Media: Ensure there are no external devices (USB drives, DVDs, etc.) connected to your computer. Sometimes, the system might be trying to boot from an external source. Windows Repair/Recovery: If you have a Windows installation or recovery disk, you can use it to access repair options. Boot from the installation or recovery disk and select repair options like "Startup Repair" or "System Restore." Reinstall or Repair Windows: If all else fails, you may need to consider reinstalling or repairing your Windows operating system. This process will vary depending on your version of Windows. Seek Professional Help: If you are not comfortable performing these tasks or if the issue persists, it may be best to seek help from a professional technician or your computer's manufacturer. Remember to back up important data before attempting any major changes to your system. If the issue persists or if you are unsure about any of the steps, it's advisable to consult with a professional technician for assistance.
Thanks, this worked perfectly .
@HetmanRecovery
5 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
I know its a 6year old video, but damn I didnt know this was the only thing bottle necking my pc after hardware upgrades I was stuck on IDE. Kudos!
@HetmanRecovery
5 ай бұрын
We are glad that you were able to solve the problem)
Nice still worked with my windows 10. Used method 2 straight forward. Thanks 👍 Lifesaver
@HetmanRecovery
2 жыл бұрын
Always glad to help )
@prashantyadav4973
2 жыл бұрын
@@HetmanRecovery I don't have the option of AHCI. I only have IDE Help me
Tried this in Safe Mode & it did the trick, Cheers!
Method ll worked like a charm. Thanks.
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Method 1 worked for me. Went from "RST with Optane" to "AHCI". So I could clone my Hard drive to a M.2 SSD and not have the computer think it was a caching drive. However found one of the elements under iastoreavc. Thanks for the video.
@HetmanRecovery
Жыл бұрын
Glad you found it helpful. Thank you for the detailed information.
First metod worked, thanks.
@HetmanRecovery
5 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
some site has suggested that ahci causes acpi error during install, i would like to know your opinion, thanks in advance
@HetmanRecovery
4 жыл бұрын
I didn't encounter errors due to AHCI
Literally the only method (2) on the entire internet that worked!
@HetmanRecovery
Жыл бұрын
Glad our video helped you )
I'm from Madagascar and I'm not computer literate! but your video is very clear
@HetmanRecovery
Жыл бұрын
We are glad you found our video useful. If you have any questions, we are happy to answer them.
Do you have a write-up describing what you did in this video? It was very informative, but it would be easier to follow the instructions if they were written in a document to follow step by step with all the possible variants. Anyway, thank you.
@shamsta21
5 жыл бұрын
This is from a website
@shamsta21
5 жыл бұрын
Go on it
Thank you so much 🥰
Method #2, Thank you!!
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
What is the setups for windows 7 ? I am using it for 3 years and not interrested in reinstalling . please .
@sirajmal
5 жыл бұрын
Put some hot water in side pc its ok
at 5:12 i have " Access is denied " the boot configuration data store could not be opened !!!? what to do?
@HetmanRecovery
4 жыл бұрын
Administrator rights
Thanks it Works 💞💞💞
You are simply awesome
@HetmanRecovery
4 ай бұрын
Thank you, we are glad that our video was useful to you)
Pls somebody help me, i can't get into my bios, when i restart my pc and press DEL button , it blink my bios and back to the "GTX NVIDIA 1050 etc" < before the windows logo/loading shows up
@HetmanRecovery
2 жыл бұрын
Good afternoon, have you solved your problem?
@Marushi0
2 жыл бұрын
@@HetmanRecovery Yes sir, Already solved it, unplugin the SATA cable from my HDD :D, btw thankss for the video, it worked!
I have separate settings in my Asus Rampage III Extreme BIOS for SATA 3G and SATA 6G ports. Both have AHCI and IDE options. My OS is installed on a SSD connected to a SATA 6G port and I have other HDDs connected to the SATA 3G ports. I used the "change registry" option and then went to BIOS and changed both SATA 3G and SATA 6G to AHCI. When I reboot, I get the inaccessible boot device BSOD because if I don't restart in safe mode as you well advise, only the SATA 2G will be changed to AHCI. So I rebooted in safe mode and all worked but... I went back to Regedit and noticed that iaStorAV\StartOverride\0 is set back to "3"... But the iaStorV\Start is still "0", while the storahci\StartOverride folder is now gone and replaced by storahci\Enum. Is this normal? May this be related to my SATA 6G having a Marvell driver? I also noticed that I now have two MArvell drivers installed: 91.xx and 92.xx... Is this also normal?
@htl1408
Жыл бұрын
Did you ever have your issue figured out? I ran into the same problem.
I used method #2 as i thought it's the Microsoft official way :D . Thanks bro it works perfectly
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
After enabling ahci my primary ssd disappeared from BIOS
Hello, thanks for the video I did the 2nd method, and everything was ok, but after 2nd reboot it says that my windows is not activated and I need to activate it (Windows 10 pro, it was activated before, but I don't have serial key now). Is there any solution to that problem?
@HetmanRecovery
3 жыл бұрын
Activate your Windows :)
@vhoa1000
3 жыл бұрын
@@HetmanRecovery ahaha the problem is that it's giving error, and I can't activate it, I tried everything, but nothing works
Method 2 works on me, easy and quick. Thanks.
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
So does our pc get formatted or something after this & do we have reinstall windows after changing bios and also does it solve my slow ssd problem. Please help me anyone
@weebbanana7895
3 жыл бұрын
No it does not need formatting. Your ssd might need replacement if it's underperforming, check its health if its low then you need to replace it.
I have crucial BX500 240gb tried everything but speed is bottleneck to 285 mbps only. Can anyone help me out why I am not getting 550mbps which is ssd capacity.
@HetmanRecovery
2 жыл бұрын
Hi, did you find out what the problem is?
Thanks, it work for me with cmd😊
@HetmanRecovery
5 ай бұрын
We are always happy to help)
hello thankyou , windows xp ?
Thankyou sooooo much❤
Thank you!
@HetmanRecovery
5 ай бұрын
We are glad that you found our video useful.
i have no iaStorAV folder.
Does it solve the issue to recognize Samsung SSD in magician? Does anyone confirm that please?
@HetmanRecovery
4 жыл бұрын
I can't guarantee anything to You
thx so much!
cmd says "the element data type specified is not recognized, or does not sapply to the specified entry"
@HetmanRecovery
4 жыл бұрын
Run cmd as administrator
worked, thanks
Great video, thanks for help
@DarkArrowRL3
5 жыл бұрын
Did you do it ? Was it safe ? Thank you
@romanwolf4180
5 жыл бұрын
@@DarkArrowRL3 Yes, I did exactly what he shows and says (important info in 3:47 ). Works without any problems and errors
thank You thank You thank You :))))) method nr 2 worked...
Thankyou soo sooo much ❤️❤️❤️
@HetmanRecovery
2 жыл бұрын
Always glad to help )
Thank you very much brother it worked and i feel difference in gaming performance❤❤❤❤thanks God😊
@HetmanRecovery
8 ай бұрын
Glad our video was useful to you)
Method 2: work for me , in win7 Thanx man.
@HetmanRecovery
4 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
Worked thanks
@HetmanRecovery
2 жыл бұрын
We are glad we were able to help you )
u saved me ^^ thx
@HetmanRecovery
Жыл бұрын
Мы рады, что смогли помочь вам )
Thanks a lot
Is AHCI compatible with a HDD?
@code8486
5 жыл бұрын
yes, it is.
THANK YOU SO MUCH, ITS WORKED ON LENOVO LEGION Y520
@HetmanRecovery
5 жыл бұрын
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
@fahdiaf
3 жыл бұрын
which method did you use, the regedit or the cmd enable safe boot one?
Open: msconfig/boot/safe mode minimal/apply then restarts. 5:00 After you are done with changes, open again msconfig, and put all as normal: msconfig/boot/uncheck safe mode minimal/apply then restart your pc..! Easiest way to do this..!!!
Thanks Bro
Omg thanks alot it works for me
@HetmanRecovery
4 жыл бұрын
We are glad that our article was helpful for you. If you have any questions, we will gladly answer them. kzread.info/dron/u-D9QnPsAPn7AtxL4HXLUg.html
This video works to change the sata configuration, thanks. But this doesn't seem to fix the hard drive not detected Issue...
@HetmanRecovery
5 ай бұрын
Is it possible your disc is corrupted?