Thoroughly enjoying your DRZ DIY videos. Thanks!

@WESTOZEXPLORING

4 жыл бұрын

Thanks Alex, glad you enjoyed them! Is there anything else in particular you would like to see?

Whilst I wish so so much it was clearer which T peice hose was being rerouted earlier, this video was really handy for doing this mod. Cheers!

Good stuff , I woke up thinking about which hoses were the ones to reroute and first video I see is yours. Thank you . Subscribed

@WESTOZEXPLORING

3 жыл бұрын

Thanks Baz66, hopefully it helps when your doing the job and your ripping up the trails soon! Hope you enjoy the other riding and tech vids on the channel 🙂

Hey Buddy, great job well done. Near the end of the Video Your friend was talking about the bigger 15T front sprocket - couldn't fit it because of clearance issues with the case guard. I have done this successfully using an OEM 15T sprocket and the case/chain guard from the SM model. Works perfectly!

@WESTOZEXPLORING

4 жыл бұрын

Interesting! Will pass it on, I am not sure as I run 14/48 gearing with a B&B case saver and that all works nicely

Thanks Jase - nice work, good instructions.. Now done on mine. No excuses next water crossing - or at least different excuses!

@WESTOZEXPLORING

3 жыл бұрын

Thanks mate, next hardest thing will be finding a creek with enough water! Bring on the rains!

Awesome video mate - have an 07 wr250 and has been stalling out always doing crossings this is def the problem going to re route the breathers today 🤘🏼

@WESTOZEXPLORING

2 жыл бұрын

Nice one Mitch, I actually haven’t had this fixed confirmed on other models so I’m really interested to see how you go with the WRF! Please let us know 🙂👍

Aaaannnd.....my problem is solved. Thanks mate, I stalled it going through 18" of water today.

@WESTOZEXPLORING

3 жыл бұрын

Csedan510 great news, let us know how you go after the modification!

Nice vid. I've found with the water crossings that you can go deep but not for long without stalling. A friend of mine said with the FCR carby, run 1/2 the hoses up & leave 1!2 down.

@WESTOZEXPLORING

4 жыл бұрын

Your friend is spot on. didn't explain properly but need to keep half down for drainage when the Carby floods. Are you going to do the Modification to your DRZ?

@25wasthespeedlimit40

4 жыл бұрын

@@WESTOZEXPLORING I probably should. I've also had the same problem with the KLX after spending a couple minutes trying to get through a flooded area.

Great stuff..! Thanks for the helpful and informative video. 😉👍

So @ 2:45 , there are two hoses that are running down the left hand side of the carb from the factory. The goal is to re-route BOTH of those hoses correct? Right side one is pulled back through to the right side and routed upward, and left side one is routed up the left side. Leaving both Tee fittings as they are, did I get that correct? Seems like the left hand one (with tee under the TPS sensor wire) might have to make a 180deg U bend? Is pinching an issue here? might be good to warn/describe?

Hi mate just watching yr video and can you clarify whick side of the T piece are to hoses that need to be rerouted Is it the top or bottom of the T on bothe sides of bike ?? Thanks kn advance rick

@WESTOZEXPLORING

Жыл бұрын

Top on both sides sorry Rick, apologise if not clear in the video!

Good stuff guys. Can you tell me the name of the small petrol filter and where did he get it? And I noticed the short clutch/brake levers, do you have the name and where to buy, also if you fitted them yourself was it an easy task?

@WESTOZEXPLORING

4 жыл бұрын

Sure thing, I'll ask and come back to you. The levers are pretty good looking that's for sure

@gregmiller2178

4 жыл бұрын

www.ebay.com.au/itm/Pivot-Brake-Clutch-Lever-For-SUZUKI-DRZ400-E-S-SM-DRZ400SM-DRZ400S-2000-2020-19/173824036636?hash=item2878b84f1c:m:maZWVtzbWobbV1r5212beWQ&frcectupt=true

@EdVenture547

4 жыл бұрын

There is another way of doing this, you can add a tee piece into the existing fuel line and run another tube from the tee into the air filter. The advantage of this is that u can leave existing lines and when fuel overflows it will still drain as usual...

@WESTOZEXPLORING

4 жыл бұрын

DRZ DAYZ confirmed with the above link, also the fuel filter is from eBay. All self installed!

What was the reason for going from the swm500 to the drz I’m trying to decide on either a swm500 or drz400e cheers

@WESTOZEXPLORING

3 жыл бұрын

Hi Truth Saw, for attilio it came down to quality and reliability in which the SWM was lacking. If you look at an earlier video on the channel I had a test ride and walk around. For reliability and quality can't go past the DRZ. The SWM is good bang for buck but may not be the best long term purchase

Can I please clarify, is there 2 t pieces one each side of carby? And do you re route both tubes on the t piece (mine has two tubes coming out of left t piece) is there two tubes coming out of the right side t piece.

@WESTOZEXPLORING

3 жыл бұрын

Hi Bundella1, yes if you have the E model with Keihin FCR39 Carby will be two t pieces on each side of the carby. Directly opposite each other.

@bundella1

3 жыл бұрын

WESTOZ EXPLORING thank you I have found the right side which is harder to access, so I’m gathering there’s 4 tubes to re route as each side has two tubes running form the t pieces, but that’s at odds with the video 🤔

@WESTOZEXPLORING

3 жыл бұрын

@@bundella1 leave 1 tube each side running down, don't reroute. The top tube each side left and right run those ones upwards. Still want two of the tubes running down to drain excess fuel if you drop and flood the carby

@bundella1

3 жыл бұрын

WESTOZ EXPLORING ok thanks 👍 cheers....

@bundella1

3 жыл бұрын

Thanks for that clarification, was a bit confused when I found 4 tubes instead of 2🤔 however now have two lower ones going down as original and upper ones rerouted into the air box, 👍

Wat ones do you mean the ones on the t piece or the ones beside the t piece

@WESTOZEXPLORING

2 жыл бұрын

On the T piece Trin C, should be two hoses either side. Run the top hoses up

what brand is those foot pegs, btw is that race tech springs ?

@WESTOZEXPLORING

3 жыл бұрын

Hi sdq sdq, apparently eBay special "Chinese Aluminium". And springs are aftermarket, pretty sure racetech. Bike set up by a local suspension shop :- Endurowetech. Perth Western Australia.

@allaussietraveller9879

2 жыл бұрын

@@WESTOZEXPLORING hey mate, would you recommend Endurowe? I'm looking to get my drz revalved and lowered.

@WESTOZEXPLORING

2 жыл бұрын

@@allaussietraveller9879 yes definitely recommend, Perth based small business, Will take the time to go through your riding style and set up to match everything to you . Happy with my results!

@allaussietraveller9879

2 жыл бұрын

@@WESTOZEXPLORING cheers mate, sounds good 👍🏼

Hey Westoz, What type of seat is on thar DRZ?

@WESTOZEXPLORING

4 жыл бұрын

Hi Craig, Its a seat concepts seat, looks like original profile. I have always had the stock seat, will have to have a ride on this one and see the difference and compare!

@craigfism

4 жыл бұрын

@@WESTOZEXPLORING how much did you pay for the seat concepts seat and which model is it the wide one or the narrow one the low one or the commuter one

@WESTOZEXPLORING

4 жыл бұрын

@@craigfism Not too sure as it is on my mate Attillios bike. Apparently is the same as the stock shape. Is definitely not the wide one. Ill do some research and have a test ride of it one day and do a video review.

So this just helps with big water crossing

@WESTOZEXPLORING

2 жыл бұрын

Sure does, on anything higher than the bottom suspension linkage

Can you just lift all the hoses up and put under the seat????

@WESTOZEXPLORING

3 жыл бұрын

No you definitely want the overflow drains running down, if your carby float gets stuck open, want the fuel to run to ground through the hose and not over the bike. Just the hoses identified Will fo the trick 👍

@craigcloss8168

3 жыл бұрын

@@WESTOZEXPLORING i Is there some where that I can look to identify the hoses, or from what section on the carby are they?? I carnt find much

@WESTOZEXPLORING

3 жыл бұрын

Hi Craig, confirming you have an E model not an S or SM model?

@craigcloss8168

3 жыл бұрын

@@WESTOZEXPLORING e mod 2020

@WESTOZEXPLORING

3 жыл бұрын

@@craigcloss8168 at 2.47 I have the screw driver right in under the throttle position sensor. You should be able to find the t-piece that goes into the carb and is the same on the other side