Bro that’s a lotta work. Thank you for the time you took to make it 🤝🏽

Great video! Thanks for taking the time to do it. It saved me time and almost certainly damage to my vehicle if I had had to experiment with disassembly when installing switches and routing wiring harnesses for after market lights....

@NitroZ18Fishing

Жыл бұрын

Thanks man!...glad it was helpful, I appreciate the support!

Thanks this helped

Reminds me of when I rewired my 33' SeaRay dash panel. Swore I would never do it again but with your video I may just do it again if need be on my 2022 TRD Sport. Good job Brother!!

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate it!!...lemme know if I can help with anything!

Thanks for putting in the work for us! Had to take apart a lot of the dash to mount my switch controller and this could’ve saved me so much time lol

@NitroZ18Fishing

Жыл бұрын

No prob, happy to help!…thanks for watching!

Thank you so much for producing this video. You saved me from breaking a ton of clips!

@NitroZ18Fishing

3 ай бұрын

No prob, happy to help!…thanks for watching!

Good stuff. Will help with my audio upgrades.

hell yeah! Thank you! planning to add aftermarket wiring/lights on my base tundra. I'm always scared of breaking the plastic tabs. Good reference

@NitroZ18Fishing

Жыл бұрын

No prob, thanks for watching!…it’s honestly super easy to do this whole process, much less intimidating than it looks!…lol

I learned so much from the video. Thanks!

@NitroZ18Fishing

Жыл бұрын

That's awesome, thanks for the feedback!… Appreciate all the support!

Thank you for making this video.

@NitroZ18Fishing

Жыл бұрын

No prob, thanks for watching!

Amazing video, thank you !! 😁👍

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate that!!

I wouldn't attempt to do this, but kudos to you for helping others.

@NitroZ18Fishing

Жыл бұрын

Happy to help!…it’s honestly not as bad as it looks, thanks for watching!

Do you know if you are able to replace the top part of the dash above the speedometer/center touch screen? I would like the leather one like in the platinum/capstone vs the plastic one on the TRD Pro. If you can or have, a video on that removal would be awesome! Thank you!

This is amazing. Is that possible to do a quick video show how to take out/slide off the rear mirror cover, i try to install a mirror tap for the radar detector on the tundra trd pro 2023. Thank you

Grat video I was really hoping that I would get to see access to those speakers there in the dash but I guess I'll have to fumble around with that myself.

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate it!… do you mean the speakers up on top of the dash by the windshield?… If so, they’re super easy to access… Take a plastic pry tool and pop the cover off, and they are right there, hope that helps!

Thanks for detailed instructions. ca you do the video fuse panels under the hood? i like to see the fuse and relay locations. thanks

Great video. I was wondering when you were going to rip your new dash apart

@NitroZ18Fishing

Жыл бұрын

Thanks man!… Yeah, didn't take me long to start tearing things apart on the new truck 🤣

Crazy amount of work! Smart though I don't know any one out there that has a video on this. You will be monetizing this video for years to come. Great way to pay for that pro!

@NitroZ18Fishing

Жыл бұрын

I love doin this stuff! 🤣…it’s honestly not bad at all, if I wasn’t makin a video I can tear this whole thing apart and put it back together in a half hour, maybe less….looks way worse than it is, thanks for watching!

@shortythefrenchie

Жыл бұрын

@@NitroZ18Fishing you are one of a kind bro!

Great video! If Taco Tunes ever comes out with their JBL upgrade system I might need some of this info.

@NitroZ18Fishing

Жыл бұрын

Thanks Paul, I appreciate it!!

Interesting… I was always wondering if it was possible to replace the 8 in screen with the 14 in screen in my SR5, and seeing how these are mounted that might actually be possible. Thanks for putting in the massive effort for this video!

@NitroZ18Fishing

Жыл бұрын

No prob, thanks for watching!!…let me know if ya ever try to make the swap!…wiring may be different, but I’m honestly not sure….would be a heck of an upgrade!!

@newtonfb

Жыл бұрын

It does look possible, just a matter of the connectors. Would love to find out

@koberoy5947

Жыл бұрын

Have you tried yet? I managed to get a 14” screen and everything is a direct fit. The vents can fit inside the vent Frame on the 14” screen but it’s not a perfect fit. But the 14” screen functions perfect just like the 8” screen. The only problem is I could not adjust the volume. Not even with the steering wheel buttons. You need the climate control panel and the wiring harness that plugs from the back of the volume knob to where ever it plugs in at.

Very cool! Thank you for this. I’ve taken apart some of these parts on the drivers side unsuccessfully tracking down a nasty rattle. Can the top of the dash (leather on my 22 platinum) be removed?

@NitroZ18Fishing

Жыл бұрын

Thank you, I appreciate it!…the top of the dash can definitely be removed, it’s just some extra steps…I’ve actually never removed that part before but I’ve seen it done…just a little more involved, thanks for watching!

Is the clear glass for the digital dash removable as well?

Will you do a video taking out the map light/sunglass holder and also accessing the back window? I believe my rattle up front is the wire that is there for the dash cam and I think have another wire rattling inside the back window.

@NitroZ18Fishing

Жыл бұрын

Yea absolutely, I'm going to be taking that off anyway to see about swapping the led chips in there, I'll definitely make a video on the map light area!...and I'll add the rear window to my list as well, can't make any promises that I'll get to that one really soon, I have a ton of videos lined up, but I'll get it done for ya!

Hey there, I'm trying to find how hard it is to replace the center console storage box, do you have that breakdown? I was broken into last weekend, and they crowbar'd and split my console trying to get into my safe. I'm looking to replace the broken parts, but don't know how to get down to that level yet. Your stuff is good for taking the stick shift area apart, but do you have one of taking one of the box out? The box that the safe is sitting in. They broke/split the side of that on the passenger seat side.

I am trying to install a Course Motorsport phone mount and I can’t figure out how to install. Any suggestions, will it work with a 2023 Sequoia

Any chance you are going to have that STL available, not so much for the holder but the replacement piece itself? @7:07

I wonder if the piece at 11:35 could be interchangeable with the "pocket dash" found on the lower trims. That empty area drives me nuts in my Limited and would much rather have extra functionality. Thanks for a great video!

@NitroZ18Fishing

Жыл бұрын

I don’t see why it can’t to be honest!…I think all the trim levels go together the same way in that area, let me know if ya pull the trigger on it!

Good work!! Maybe next time you will taking the engine apart

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate it!…not sure about the engine, but stay tuned for the intakes and charge pipes, we’ll be changing those out in the very near future!…charge pipes are already here, waiting on the intakes to get delivered!

Can u do a video on a pillar removal

@NitroZ18Fishing

29 күн бұрын

Yea absolutely! I’ll add it to my upcoming videos, happy to help!

After all this, am I able to lift the dash up? I need to replace the passenger side dash airbag

Sir,,Can i have the part # for the ac vent connected to the screen please,,tq

Is it possible to change the interior of the Tundra 2018 to 2023 I have a Tundra and I want to change its interior

Great video what a puzzle! Can I request you do the door panels next? I have a rattle Id like to track down

@NitroZ18Fishing

Жыл бұрын

Yea absolutely!…I’ll get that done asap, they’re pretty straight forward as well, thanks for watching!

@scodyt3996

Жыл бұрын

kzread.info/dash/bejne/lJ-qy6afg8zFj5c.html

What an amazing video! Thanks for detailed instructions. I’m about to install a Carlinkit box and want to put the device in the glovebox while running the USB-A wire to where you detached the dash at 11:37. What panels and pieces would you recommend on taking out to minimize the tear down?

@NitroZ18Fishing

Жыл бұрын

Thank you, I appreciate that!!

@NitroZ18Fishing

Жыл бұрын

And I have actually relocated mine to the glove box as well, I'm going to make a video showing exactly what I did, it's completely hidden!

@maithaihoa

Жыл бұрын

@@NitroZ18Fishing I have my box coming tomorrow along with an angled USB-A to USB-C. Planning on fishing it through the little opening right below the bottom right corner of the screen, we’ll see how it goes.

Where can I get the trd pro foot step protector?

@NitroZ18Fishing

Жыл бұрын

That's from Tufskinz, use code Nitro10 to save a few!

It's like a giant Lego set everything just snaps together. Now if you can come up with a way to make that 14" screen fit into my 2020 Tundra Trd Pro.

@NitroZ18Fishing

Жыл бұрын

Hahaha…that would be sweet!…and that’s basically what it is, all the panels just snap together with a couple bolts mixed in…thanks for watching Joe!

Where did you get the black overlay for your steering wheel logo?

@NitroZ18Fishing

Жыл бұрын

Got it off Etsy but unfortunately the company I got mine doesn’t make them anymore

@nitroz18 fishing where do you get a black center emblem overlay ?

@NitroZ18Fishing

Жыл бұрын

I got mine off Etsy but unfortunately the company doesn't make them anymore...I believe they have them on eBay!

Thank you for making this very informative video! Not sure if it's been mentioned yet, but Crutchfield has an open request for disassembly videos like this, not sure if they pay for content but with your step-by-step video, you definitely should. -- I'd like to relocate the front USB under the 14 in. monitor (the piece at the 25:26 mark), is it absolutely necessary to disassemble both driver's and passenger's sections or can I work up from the center console? Thank you again!

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate that!!...I'll have to look into that, I've never heard of Crutchfield but I'll look em up, thank you!...and yea you don't have to do the whole dash for that USB, I actually have a video coming out showing how to do exactly that!....I moved/hid my Binize box cause my OCD couldn't handle it 🤣

@BLASTech

Жыл бұрын

Oh, and I can relate to the OCD thing, my wife says that what I have is called "anal-retentiveness" and relocating the USB is a must because I can't come to terms with using that front port.

@NitroZ18Fishing

Жыл бұрын

@@BLASTech they just dont understand our struggles! 😂

I just did this a couple weeks ago. The vents will cut the crap out of you, be careful.

Where did you get the overlay for the steering wheel?

@NitroZ18Fishing

Жыл бұрын

Got that off Etsy, but the company I got it from doesn’t make them anymore…not sure what happened

Looks like there are 11 ports. Were all the ports occupied by a connector? The 8in model has 10 ports, all the same but missing one.

@NitroZ18Fishing

Жыл бұрын

All the ports except one had a connector…I’m gonna make a short video showing the back of the unit up close, there’s been a few questions on possibly switching 8” screen to the 14” and what connections are different…thanks for watching!

Not sure I'll ever have to take this apart, but this is a great video to show just how to do it! Side note .. do you have the .stl file available anywhere for the phone mount? I'd love to print that for my truck!

@NitroZ18Fishing

Жыл бұрын

Thanks man, I appreciate it!!...I'm gonna tweak the stl a little more, a couple things I don't quite like about it just yet...as soon as I get it perfect I'll let ya know...haven't decided if I'm gonna sell them or not, I've put a ton of time into that darn thing, my OCD won't let up! 🤣

@BrianHall21

Жыл бұрын

@@NitroZ18Fishing Agreed! After going through many iterations on the TRD Off Road grill camera bracket that my buddy and I designed, we even altered it after printing and using on my grill swap. It's a never ending cycle!

@NitroZ18Fishing

Жыл бұрын

I'm glad someone understands! 🤣...my OCD is gonna be the death of me!...lol

@jessebillingslea8297

Жыл бұрын

​@NitroZ18 Fishing That was a great video. Do you have any suggestions on running wire from USB to glove box. I have a 23 Capstone with a Binize Box that I want to put in glovebox

@NitroZ18Fishing

Жыл бұрын

Thanks Jesse!...stay tuned, I've had several ask about how I hid the Binize, I'll be posting a video showing exactly what I did!

😮😳😳🤯🤯crazy

@NitroZ18Fishing

Жыл бұрын

Way easier than it looks!

I get to do the evaporator, you only did the fun part 😢

The easy with which you just pull panels off 😂😂😂. It would take me 7 hours to do that, I’d be worrying about braking things

@NitroZ18Fishing

Жыл бұрын

Hahaha!…I’ve been told I’m a little crazy for years, but this isn’t bad at all!…looks way worse than it is, thanks for watching!

Why??

@NitroZ18Fishing

Жыл бұрын

Why not??…did this on my 2020 Platinum and it’s one of my most popular videos…shows people how to disassemble if you need to run wiring or what to customize…it’s easy

@NitroZ18Fishing

Жыл бұрын

*want to customize

WHAT THE HELL FOR??????

@NitroZ18Fishing

Жыл бұрын

Hahaha...for the channel, and cause I honestly love doing this stuff...I did this same thing on my 2020 Platinum and couldn't tell ya how many people found it helpful...it's one of my most popular videos...if someone wanted to customize panels, run wiring, or any other type of install where they would have to remove panels, they found it extremely helpful...thanks for watching!

Great video thanks for taking the time to make this! I haven't see anyone talk about adding the SR5 storage box over the passenger side glove box to the TRD Pro or other trims that do not offer it. Looks like a great place to store things for a passenger.. From this parts image it would be 55041B (and a few other parts) images.simplepart.com/images/parts/toyotaOEM/fullsize/a1_555165C.jpg. Any reason this wouldn't fit on a non SR5?

@NitroZ18Fishing

Жыл бұрын

Thanks Joe!…it’s funny you mention that, I’m considering swapping that piece out myself…I can’t confirm for 100% certainty that it fits, but I can’t imagine why it wouldn’t….the way all these pieces snap in, I would think they’re completely interchangeable…I’ll keep the channel posted if I swap out any of those pieces, I’m thinking about either adding that little “tray” area, or swapping my dash out to the red pieces…I’m not a fan of red seats which is why I went with the black interior, but I do like the red dash accents!