Training starts @ 13:05

@larryzeke6767

2 жыл бұрын

i know it's quite off topic but does anyone know of a good site to watch new tv shows online?

@musaenoch2277

2 жыл бұрын

@Larry Zeke Flixportal :D

@larryzeke6767

2 жыл бұрын

@Musa Enoch Thanks, I signed up and it seems like a nice service :) I appreciate it !

@musaenoch2277

2 жыл бұрын

@Larry Zeke no problem xD

@rodger6940

Жыл бұрын

Please help me with my 07 caliber. I have a code for the p0116 and p0335 crankshaft sensor; the problem is that the car has a long crank on a cold day so this is what I have to do to get it running pretty much all day First start it with long crank in a cold day(60'f or under), let it start and idle for 5 minutes at least If is really cold from (1 to 20'f) maybe 10 minutes so next cycle the key on pressing and releasing rapidly the accelerator key off , starts right up normal everytime for a whole day But the weird thing is that when it is like 80 or 85,90'f outside really hot day, the car will start right up no long crank at all please help

Quick pre'fuel injection story. Back in the early 80's I was making a delivery to the D/FW airport and driving a 1972 Datsun w/over 300,000 miles on it; original engine and had never been opened up befire. Our trucks always had oil changes every 3500 miles so they lasted forever. Anyway, Im on one of the side roads at the airport and the engine dies. I crank it over and it sounds like it wants to run but doesnt. I pop the hood, open the air filter housing, crank it over and the engine runs. I think great, put the air filter housing on, as soon as I clamp the air filter housing on, the engine dies. We tow it back to the shop. Take the cam cover off and the camshaft was snapped in half. I was impressed w/that little Datsun. When the air filter housing was off the 2 cylinders attached to the oil pump and timing chain drive were still firing. Put another cam in it and the truck never skipped a beat; ran till we sold it years later. Engines are always fun. Throw in fuel injection and an ECM and the fun just never stops. Really enjoy your vids. You and a few others are great teachers ;)

@GoTechTraining

4 жыл бұрын

Hey Kevin, awesome story! Wonder why it snapped in the first place...i guess at that kind of mileage something was bound to happen. Thanks for watching! Mike Becker, Senior Technical Instructor

@kevinshasteen5682

4 жыл бұрын

@@GoTechTraining The 1972 Datsun was suppose to be our light duty delivery truck for small packages but we regulary used it for 1000 lbs loads and on occasion oil well rig blocks @ 3100lbs; going to/from the heat treatment facilities. We bought it new in 1972 had overload springs in the rear and 8 ply tires on all 4 corners. The little truck def paid for itself multiple times over.

I'm not a mechanic so I don't know why I watched this from start to finish, I guess I'm just curious what makes things tick. What amazes me is the wealth of knowledge you have for a comparatively young age. Seems like it would take an entire lifetime to learn such complicated systems. You're a great teacher

@GoTechTraining

3 жыл бұрын

Hey Thom, it must have been my warm personality ;) haha! Thanks for watching and for the amazing compliment. I really appreciate it :) Mike Becker, Senior Instructor

Another great presentation!! Lots of people in the industry forget their humble beginnings and perhaps that's why they are annoyed by your method in this video. However the majority of viewers are thankful that you took the time to educate us from the ground up! Continue making tutorial videos for the general public, those "experts" really shouldn't be here since they know so much

@GoTechTraining

5 жыл бұрын

Hey, thanks man! Appreciate it! This video had a little bit of everything. Stuff for beginners and stuff for seasoned diagnosticians. I prefer my videos contain a little bit of everything for everyone :) Mike Becker, Senior Technical Instructor

I don't even know what to say other than "brilliant". Extremely educational.

@GoTechTraining

2 жыл бұрын

Thanks a ton Lyndlle! Mike Becker, Senior Instructor

Some of the best teaching video's on Automobiles around. Fantastic Job Mike and Crew.

@GoTechTraining

5 жыл бұрын

Thanks, RJ_Make! Appreciate it! Mike Becker, Senior Technical Instructor

Great class Mike! That diagnosis was done in a few seconds of cranking and only equipment needed was my ears :D Now to find the cause would take a little longer but I wouldn't even charge a diagnostic fee unless they wanted me to find the root cause. Nice diag...Jumped time, bent valves, spit rockers and your right customer's repair choice .

@GoTechTraining

5 жыл бұрын

Hey Bob, thanks! Yep, that's what experience will do for you! I was under 30 min on initial diag to confirm my suspicion of mechanical failure. Odd cranking cadence led me to a relative compression test, funky relative compression results led me directly in-cylinder. The right equipment here saved a lot of potential teardown to confirm. Mike Becker, Senior Technical Instructor

Wonderful training! Walking through your crank/no-start step-by-step thought and diagnosis process was really helpful. You are an excellent teacher. Looking forward to more of your instruction. Glad you're back.

@GoTechTraining

5 жыл бұрын

Thank you very much! Glad you enjoyed this class :) Mike Becker, Senior Technical Instructor

Your going to make life a whole lot easier for a whole lot of people who struggle with this sort of thing. Keep up the good work !!!!

@GoTechTraining

5 жыл бұрын

Hey Robert, that's the goal! Thanks for watching! Mike Becker, Senior Technical Instructor

Pretty intense presentation with all avenues covered. Can be used as a reference video for any tech that has come to a cul de sac in his or her diagnosis, The range of tools used are awesome and every tech is covered from the novice up to the professional. Videos are too long when there is no content. This video screams content and is a credit to Mike and his team. Well done and looking forward to more exciting car problems.

@GoTechTraining

5 жыл бұрын

Hey Tom, thanks for watching! I hope it is a reference to everyone who's diagnosing this issue! Glad you enjoyed the class :) Mike Becker, Senior Technical Instructor

Thank you Mike. Good job. Have a blessed and safe week.

@GoTechTraining

5 жыл бұрын

Hey Billy, thank you. You as well! Mike Becker, Senior Technical Instructor

Thank you and all your crew on showing us your knowledge, I really appreciate

@GoTechTraining

5 жыл бұрын

Hey Edas, thanks for watching!! Mike Becker, Senior Technical Instructor

Superb presentation, Mike! The way you explain and handle tools and cameras for two hours straight... is nothing short of magic. One subtle mishap with Picoscope cursors happened and went unnoticed at 1:01:06 : you grabbed a cursor, but it didn't "catch" and dropped into 180mA zone. So you grabbed another one. Thus your cursors window made it seem like you have 176mA current, when it should have been more like 20mA. Which, of course, only bolsters your point of that circuit being a low current one. The thing is this issue happens to me more often than I want to, I wish it was a little bit harder to lose a cursor while it is being dragged...

@GoTechTraining

5 жыл бұрын

Thanks Dmitriy! Really appreciate the kind words. I did notice that afterward upon watching the video....Current was WAY lower than what I said. Anyone who watches and is familiar with PICO (like you) will notice that and hopefully see what it really way. Thanks for finding it! Mike Becker, Senior Technical Instructor

Great work on this video. Timely info for me. I just sent a contact us email to you guys on a hot start condition. I just got most of my gear together for my first laptop scope (Pico 2000 series the lowest mode). I just got my first waveform today. I will run through these test to try to fix my 04 Venture 3.4 that is just about to reach 200k. Thanks to all of you at Wells for putting together these wonderfully information packed segments. Thanks, John

@GoTechTraining

4 жыл бұрын

Hey John, thanks for watching! Yeh, I saw the email. Good luck! Mike Becker, Senior Instructor

Excellent class as usual. Looking forward to adding to my wardrobe this year.

@GoTechTraining

5 жыл бұрын

Hey Jim, thanks! Oh yeh?!!! I'm so excited for these. You guys are going to love them. Mike Becker, Senior Technical Instructor

Incredible tutorial ! Thanks for sharing your knowledge and skill .

@GoTechTraining

Жыл бұрын

Hey Thomas, Thanks for watching! ~Ryan

@funnyfolk

Жыл бұрын

- Spend Your Time And Not Your Money - kzread.info

Thank you Mike. Always enjoy your videos. Very educational! 👍

@GoTechTraining

5 жыл бұрын

THanks Dylan!!! Mike Becker, Senior Technical Instructor

Great video and excellent information as always. Appreciate you sharing your knowledge and experience with us!

@GoTechTraining

5 жыл бұрын

Hey Pauly?! Thanks for watching and for the comment! Mike Becker, Senior Technical Instructor

@PaulysAuto

5 жыл бұрын

@@GoTechTraining absolutely you always have good information and content.

@GoTechTraining

5 жыл бұрын

Thanks a ton! Mike Becker, Senior Technical Instructor

Watched the whole thing end to end - great stuff as always, Mike! 👍👍

@GoTechTraining

5 жыл бұрын

Thanks Smitty! Appreciate it! Are you going to Vision? Mike Becker, Senior Technical Instructor

@SmittySmithsonite

5 жыл бұрын

@@GoTechTraining - Unfortunately, no. Time and funds won't align this time. Long ride from MA. Maybe some day.

@GoTechTraining

5 жыл бұрын

Maybe next year!? Who knows what the future holds! :) Mike Becker, Senior Technical Instructor

@SmittySmithsonite

5 жыл бұрын

@@GoTechTraining - Very true, Mike! We shall see. :)

Excellent vid Mike thanks for posting.

@GoTechTraining

5 жыл бұрын

Thank you very much! Mike Becker, Senior Technical Instructor

Thanks Mike for you great class, I like to see again , regards from Spain

@GoTechTraining

5 жыл бұрын

Hey Pablo, thanks for watching! How are things in Spain? Mike Becker, Senior Technical Instructor

@Pablo_Automotive

5 жыл бұрын

@@GoTechTraining Well Mike, working hard and keeping my technical training always constant, thanks for worrying. =)

Sir, you are the only one I know who can help me out with this car problem. The car is a range rover 1998 p38 4.6HSE and v8. Many people were invited to start the car even from a far State but the couldn't. The challenge is a crank no start, no spark,no injector pulse but good communication with a scan tool. I have added fuel to the intake manifold and crank the engine no change at all. It is not starting. In addition, I checked for spark, but there is no spark as well. Hence, I have just checked for injector pulse but there's no injector pulse either. There is also no ignition current to the injector circuit with key ON and engine off. All the fuses and relays are good. I also checked the injector circuit for continuity if the wire is shorted but it was ok. Scan tool communicated and showed only p1843 and p1842 code. There was no RPM during cranking. What I noticed today when I compared the ignition, earth and DC with the same car that was starting and driving to the car that was not starting, what I saw made me to flabbergasted. Where the was ignition for example in the working car there was DC in the car that was not starting. Also a particular relay circuit for example RL-2 one of the pin of the connector when my test light was on battery ground and relay removed, the pump buzzed and testlight dim but when I tried that same location with test light and same pin the test light was dim and ABS relay was actuated no buzz from pump. It is like that in many places in the fuse box and PCM circuit. Please what's the cause of the problem and what do I need to do to fix the problem?

Thanks good training

@GoTechTraining

3 жыл бұрын

Hey Thanks! Mike Becker, Senior Instructor

Thanks mike very informative video as usual

@GoTechTraining

5 жыл бұрын

Thanks for watching Amr Hamed! Mike Becker, Senior Technical Instructor

Good presentation!

@GoTechTraining

5 жыл бұрын

Thanks for watching B Young! Mike Becker, Senior Technical Instructor

If a late-model car won't start due to spark, it's usually a crank or cam sensor. If a car won't start due to fuel, it's usually a fuel pump relay or pump. Once in a while it's the wiring. Usually not the ECM or timing or compression.

@GoTechTraining

Жыл бұрын

Hey George, i'd be careful with assumptions like that. It could lead you very quickly down the wrong path. When I diagnose no starts I assume nothing until it's been tested and proven. Your mind can play tricks on you otherwise. ~Mike

Love it!!! Distributor, t belt... It's awesome that you post all your training on KZread!!! But but but....!!!! I'm sure you don't like when a vehicle comes in when it's hacked to crap from the customer!!!!

@GoTechTraining

5 жыл бұрын

Hey Henry, thanks for watching! Mike Becker, Senior Technical Instructor

excellent video Mike thanks

@GoTechTraining

5 жыл бұрын

Thank you Mark!!! Mike Becker, Senior Technical Instructor

Hi Mike. Man I'm sooo disappointed I missed it LIVE. You did and awesome job sir. As soon as you cranked it for the first time I wanted to see relative compression but was even more curious as to how it would look if all cylinders were low. I'm familiar with one low cylinder already. Now I know. Awesome. I really would have enjoyed being in the chat room also. Great people today. Fantastic job as always Mike. Looking forward to next months class.

@GoTechTraining

5 жыл бұрын

Porsche Mike missed you LIVE!!!! The chat was amazing for this class. So many ideas shared. See you on the next one bud! Hope all is well up there north of the border...colder than cold here...ready for spring! Mike Becker, Senior Technical Instructor

@mikeburton1733

5 жыл бұрын

@@GoTechTraining Yes, all is good here in Ontario. You'll be happy to know I've added a DSO NANO scope to my aresnal of hantec and pico. Its identical to the U scope. Just lacking knowledge now. Like I didnt know about not loading the signal wire on a 3 wire coil. I do now. I'll have to try Keith's idea about a penny on the COP alligator clipped to the scope leads. Sounds interesting although I do have the OTC COP probe. Thanks for taking the time to do these presentations for everyone. You're very much appreciated and well respected. Thanks again Mike.

@GoTechTraining

5 жыл бұрын

It's always fun adding tools to the arsenal. I'm like a kid in a candy store every time I get home to a box waiting on the porch! Interesting idea, i'll have to try that out! Hope the families well. Have a great weekend. Mike Becker, Senior Technical Instructor

@mikeburton1733

5 жыл бұрын

@@GoTechTraining Family is good here. I'm now the proud grandad of twin girls. woohoo!! I bet your little man is running circles around you now. Is the car you burned out the drivers, in a video? Also just daig'd an APPS and ETB last weekend on a 2013 Chrysler 200. Bad throttle body. That may be a good training video someday or a counterpoint presentation. Just a thought.

@GoTechTraining

5 жыл бұрын

Congrats!!!!!!!! Yes, he is just about to the terrible 2's now. He has soooo much energy! Yeh, that is the Ford Fusion video I did a few back. Let me know if you can't find it i'll email you a link if needed. Sounds like a fun diag. Sensor issue or mechanical issue in the TB? Mike Becker, Senior Technical Instructor

Excellent video

@GoTechTraining

5 жыл бұрын

Thansk Oscar! Mike Becker, Senior Technical Instructor

Great class Mike! 👍 Sorry I’ve missed it!

@GoTechTraining

5 жыл бұрын

Hey Nick, thanks! Better late than never :) Mike Becker, Senior Technical Instructor

Top vid, it is shooty not being able to catch live streams because of the time difference but I always look forward to catching them after. Masterclass

@GoTechTraining

5 жыл бұрын

Hey Jake, thanks man! Unfortunately, I can't be everywhere at the right time. Would you mind just editing the profanity from your comment? I do my best to keep the channel clear of cursing. Thanks! Mike Becker, Senior Technical Instructor

@2secondslater

5 жыл бұрын

@@GoTechTraining done, apologies

@GoTechTraining

5 жыл бұрын

Haha! Thanks man. Appreciate you taking the time to edit it. Trying to keep the chat as clean as possible...but we, as car guys, tend to be pretty foul-mouthed by nature lol! Mike Becker, Senior Technical Instructor

@2secondslater

5 жыл бұрын

Lol, some of the words that we Aussies use as part of everyday banter are seen as profanity elsewhere, I've gotta be more mindful of that.

@GoTechTraining

5 жыл бұрын

All good haha! We use them everyday too, just try to keep the channel clean :) Mike Becker, Senior Technical Instructor

You should use your pico scope and do a relative compression test first. It takes a minute to do. Every driveability concern should start with a relative compression test imo. Another quick thing I will do is try to get it to fire on some brake clean or starting fluid. If you suspect broken timing chain/belt watch for valve action thru the oil fill cap ( not always possible). These 3 tests will take me less than 5 minutes.

@GoTechTraining

5 жыл бұрын

Aaron, Relative compression is an AMAZING first step. The other 2 can be valid, but are dependent upon the vehicle. Either way. Quick tests that provide a ton of info are critical! Mike Becker, Senior Technical Instructor

Very nice video!!!

@GoTechTraining

5 жыл бұрын

Thanks Ichika! Mike Becker, Senior Technical Instructor

As usual first class presentation!!

@GoTechTraining

5 жыл бұрын

Thanks Bill!!! Learn anything!? Mike Becker, Senior Technical Instructor

@billrimmer5596

5 жыл бұрын

NGK Technical Training Scoping things with the amp clamp. I have three of them. Minimally invasive.

Go Tech Mike Becker Good Afternoon take care and have a great day Mike Becker Tutorial great 👍 👌 👏 thank you From Nick Ayivor from London England UK 🇬🇧

it's got a bicycle chain for a t chain belts last longer it's a cheater way to add vvt this is common on this engine great class like always

@GoTechTraining

5 жыл бұрын

Thanks for watching Juan! Mike Becker, Senior Technical Instructor

way to go !!! super amazing , excellent video man. Also, do you teach auto tech at a school?

@GoTechTraining

5 жыл бұрын

Hey Jeremy, thanks!!! I do not. I create training events/material full time here at NGK. Mike Becker, Senior Technical Instructor

Hey Mike, good video! I have a 2.4 engine swap, dodge 2011 block ,08 head , in a 2015 dodge journey got it installed an it won't start ,throwing codes for crank an cam sensors malfunction, replaced all 3 sensors an still no change, took a scope an looked over reluctor wheel, looked ok, checked all relays an fuses, timeing to my knowledge is on ,looked over it several times unless there's something I missed, I'm lost on where else to look ,wiring to sensors looks fine unless there's something hidden, I put scan tool on Dtc an its telling me pcm checked out ok. I could use some idea on another place to look, Thank you

Great video! Do you have any experience with changing the camshaft sensors on a Hyundai 2007 Santa Fe 2.7L? I have a crank / no start issue w/ zero rpm indication. I cannot remove the Bank 1 camshaft sensor (seems the engineers at Hyundai designed the water lines that go to the cooling assembly to encroach on ).

Very intriguing video, But, wondering about your use of a scope attached around the fuse testing the fuel pump... Is really helpful to be able to test the fuel pump when it's in or on top of the fuel tank and is not immediately accessible... - Is a scope necessary, or is anything possible using an volt/ohm/ammeter? - Related to the above question about using a volt/ohm/ammeter, if possible and measuring amps, then I wonder if a clamp-on meter can be used. - Are you testing only for bad/good fuel pump, or some condition? Or, maybe even if for some condition, maybe it doesn't matter if it's some condition serious enough to warrant replacing? Thanks in advance.

hi mike. always good info to know. awesome video

@GoTechTraining

5 жыл бұрын

Hey Darren, thanks!!! Mike Becker, Senior Technical Instructor

@evansautocareevans1454

5 жыл бұрын

@@GoTechTraining I have learned so much from your vids not just diag but understanding how things actually function. seems like NGK are putting you under pressure to do a quick skip this skip that. didnt have that from wells tech

@GoTechTraining

5 жыл бұрын

Hey Darren, that's not really the case...it's just a matter of trying to keep the video at a decent length. Performing and testing EVERYTHING for a crank/ no start diag could take an 8 hour class for sure. The goal here was to show some basic tests and some high end tests that lead you with the most answers in the shortest amount of time. To date, this is our longest training class. Mike Becker, Senior Technical Instructor

Bro your video is amazing ❤ thank you very much 🌹

@GoTechTraining

Жыл бұрын

Awesome Thomas! Thanks for watching :) ~Mike

@funnyfolk

Жыл бұрын

- Spend Your Time And Not Your Money - kzread.info

Really good stuff

@GoTechTraining

5 жыл бұрын

Hey Matt, thanks!!! Mike Becker, Senior Technical Instructor

Perfect excellent performance

@GoTechTraining

5 жыл бұрын

Thanks Ivan!! Mike Becker, Senior Technical Instructor

I've never seen that before. The roller mia crazy

@GoTechTraining

5 жыл бұрын

I know, right!? Something had to give. I guess that was the weak spot? I'm curious to see what kind of shape the valves/pistons are in. If I get the ok for a motor in here I'm going to tear this one apart just to satisfy my curiosity! Mike Becker, Senior Technical Instructor

Good job scanner danner

👍👍👍👍👍👍👍👍👍thanks for the training video 🙏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@GoTechTraining

4 жыл бұрын

Hey Salvador, thanks for watching :) Mike Becker, Senior Instructor

I was called to another garage to fix a 2005 300c chrysler. The problems they noticed with the car was Hard or no start, red lightning bolt flashing, no throttle response, headlight stays on, battery and ESP light remaining ON during, most times immediate stalling after starting however, if it doesn't stall there's a rough idle throughout idling as a result a old PCM was replaced with a new one however problem still persisted. I scanned for DTC codes and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc. Please, how can I fix these problems? Can you also 🙏 provide me with the wiring diagram to CMP, CKP, APP factory values and how to test them? What should I be looking for in fixing the blinking red lightning bolt limp mode light, how can I reset the throttle without a scanner? 🙏 How do I fix that?

great vid

@GoTechTraining

5 жыл бұрын

Thanks Mason! Mike Becker, Senior Technical Instructor

Scanner danner never told usthat we can demage the pcm using a test light to check the controles. Thanks dude

@GoTechTraining

3 жыл бұрын

Hey Milton, i'm sure somewhere in his videos hes talked about not putting a load on computer controlled circuits. Thanks for watching! Mike Becker, Senior Instructor

Help please. We are just starting out. What would be the best Lab Scope Manufacture and Model to start with? We would like to buy the best so we can just add to it as we grow. Great educational videos, thank you for sharing your wisdom with us!!!

@GoTechTraining

5 жыл бұрын

Hi Finom1, I highly recommend the PICO 4 channel scope. Check out AESWAVE.com they are great to buy from! Mike Becker, Senior Technical Instructor

@Finom1

5 жыл бұрын

Thank you for getting back to me so quikly. Great educational videos!!!

The engine oil appears to be super thin. Makes me wonder if the previous oil change included the improper viscosity of oil, which lowered the tensioner's ability to keep proper pressure on the chain. I don't foresee Honda specifying 0W-20 oil in an engine this old, if that's what was used.

@GoTechTraining

5 жыл бұрын

Hey Joseph, that oil looking thin may be the effect of all of the cranking I had been doing. Engines flooded and diluted the oil. It smells like fuel. Mike Becker, Senior Technical Instructor

Nice video enjoyable 2 hours.

@GoTechTraining

4 жыл бұрын

Hey D.D thanks, glad you enjoyed it! Mike Becker, Senior Instructor

Hello, Mike. What voltage is expected to see in a pcm controlled ground before and after the pcm provides the ground? Some type of bias voltage before and 12 v (Voltmeter on battery pos?)

@GoTechTraining

5 жыл бұрын

Hey Little7, it really depends on the circuit. Almost ALL PCM circuits use low reference, a few hundred milivolts at most, for the ground. The high voltage side of the square wave can really be anything. Some are 5, some , or 9, or 12. Depends on the car and the circuit. Mike Becker, Senior Technical Instructor

how can i sign up

Awesome video mike . Did the customer fix the car? what did you have to do to fix it?

@GoTechTraining

5 жыл бұрын

The customer is still undecided at this point. Cars still on the hoist where I left it yesterday. Mike Becker, Senior Technical Instructor

Actually injection occurs while the cylinder is coming up to evacuate the exhaust gases, the pulverised fuel is kept in the port until intake occurs.

@GoTechTraining

5 жыл бұрын

Depends on the engine and the injection method. Also depends on what VVT is doing to the intake valve. Fuel injection is a hard thing to rely on. Mike Becker, Senior Technical Instructor

@op-tim_auto

5 жыл бұрын

@@GoTechTraining Honestly, a fuel pressure of aprox. 3.5-4.5bar (that's roughly the pressure in a PFI engine) is not enough if the injectors open when the intake valve opens. The valves would be shut before all the fuel enters the cylinder, so the fuel must be delivered in the port before intake valve opening. BTW, i've learned alot from your videos, especially fuel trims and for that i say: Thank You and a big appreciation!

2011 toyota highlander 2.7 l no start and found water at the spark plugs.

God Bless You 😇🙏💖

SWEEET VID 👍 👍 THANK YOU

@GoTechTraining

5 жыл бұрын

Hey Sm MS, thanks!!! :) Mike Becker, Senior Technical Instructor

wonderful training on youtube.thanks

@GoTechTraining

5 жыл бұрын

Thanks man, thanks for watching! Mike Becker, Senior Technical Instructor

(I, don't have any crank and no start. I, notice that I've got 3 fault codes that popped up on the cluster. I, asume that 1 out of the 3 codes is keeping it from cranking and starting)

What if you have fuel in vehicle but flashing low fuel help please

Can I manually inject fuel to try to start my truck

Doubt it. Point is better. To do a pressure test in most cases to see what direction your are going. And then see if a scope is needed to be pulled out. I have also up sold pumps regulators and even some Injectors due to leaking. Wasn't the cause of their problem but it answered questions they had but didn't tell use about.

@GoTechTraining

5 жыл бұрын

Don't you just love it when you don't get the full story!!!! Mike Becker, Senior Technical Instructor

what I would like to hear explained is how does the transducer in one cylinder indicate a problem in all the cylinders.?

@abdul-kabiralegbe5660

Жыл бұрын

I think the relative compression test was the actual test which exposed the system-wide problem, then the transducer took a sample of one cylinder. So without a visual inspection, one could conclude the issue was definitely across the 4 cylinders.

Good Evening Mike Becker Go Tech Timing chain should be replace 80,000 ,120,000miles on vehicles 6years On Timing belts should be replace 4years ,40,000miles or 100 000miles Well done 👏 Mike Becker Go Tech water 💧 Good for your body 👏 👍 👌 💪 From Nick Ayivor from London England UK 🇬🇧

first look sensor might be the best way to tackle these problems my humble opinion

@GoTechTraining

5 жыл бұрын

Maybe, what would you test first? Mike Becker, Senior Technical Instructor

@juanrodriguez-ry6yt

5 жыл бұрын

@@GoTechTraining exhaust pulse engines are pumps

09 jeep grand cherokee . it stops runing and it dont want to start. swap fuel pump and clean injetors . found the map sensor doty with oil and dirt. clean it and put it back and still tas the simtom

@GoTechTraining

5 жыл бұрын

Hey Miguel, does it have a check engine light on? Any trouble codes? Mike Becker, Senior Technical Instructor

(I, took a jumper wire to were the starter relay is at and sprayed 3 shots of starting fluid inside the air box then the car started up. I, need to find out what those 3 codes are that popped up)

@byloyuripka9624

Жыл бұрын

it sounds like its probably something related to the fuel system then eh

I'm having the same issue kinda.. My Tucson 2006 v6 2.7 is doing that. This just occurred out of nowhere

Yes please 🥺

@GoTechTraining

Жыл бұрын

Thanks for watching Barry! ~Mike

All lights come on when key is in first position. If no codes show check fuel pressure

Tiguan 2014 Right hand side Back brake light dead, flicker light working. Tested not the light unit or globe. What is the control box fuse for the right break light? 25? left hand side break light working no problem? Please advise?

@GoTechTraining

Жыл бұрын

Hey Francois, so I've looked at the diagram. It looks like a black and green wire powers up the RR brake light bulb. That is being fed from a control module and not a direct fuse. Do you have power on that wire? ~Mike

@francoissmith7798

Жыл бұрын

@@GoTechTraining Tx , no power. Auto Electrician told me it might be the control box. :(. He suggested to reset control box, if this is not working control box need to be replaced (expensive) a cheaper option to feed power from alternative break light at the back. What is your opinion on this? Thanks for the feedback so far!

@funnyfolk

Жыл бұрын

- Spend Your Time And Not Your Money - kzread.info

I have a 2003 f150 5.4 engine can I manually inject fuel too straight to try to start the my truck

@GoTechTraining

Жыл бұрын

Hey Raul, if you try it, you want to be very careful. You don't want to flood it out or anything. A little starting fluid goes a long way. ~Mike

Mike a quick question.I have a 1.8 vvt engine .one cam sensor and crank sensor and two solenoids for the vvt.I have a 2 channel pico and would like to get a known good cam and crank corralation.Would i be better off disconnecting the vvt solenoids to get a better waveform or should i leave them connected?Also if done with them disconnected would it harm anything.Would like to see a vid on testing vvt with basic tools and advanced tools.Thanks again for the great explanations.

@GoTechTraining

5 жыл бұрын

Great question...so when taking cam/crank correlation style captures it's always a good idea to verify the VVT does not operate at your testing range. Cranking/idle/whatever. The easiest way to do that is by unplugging them. Most cam phasers are pin locked to the cam and stay locked until oil pressure is applied, so no, chances are you won't damage anything. Some engines do change VVT at cranking or idle though so it may affect the way it starts/runs. I really want to do a video on VVT...just waiting on a car with a failure :) Mike Becker, Senior Technical Instructor

@martinguitarhd28

5 жыл бұрын

@@GoTechTraining Thanks Mike for the quick response.

@anthonybeaudry6066

5 жыл бұрын

Hey Mike, want to learn a lot more about VVT from start to finish. a lot of learning by a lot of people out hear on this subject. appreciate all your hard work on this. this goes for the crew behind the camera also, Thanks Bra. @@GoTechTraining

@GoTechTraining

5 жыл бұрын

I want to do a VVT class too. Just waiting to have one with a failure on it :) Mike Becker, Senior Technical Instructor

How to change a camshaft sensor 2011 Toyota camera

It normally take longer to do a fuel pump current test then it does a pressure test.

@GoTechTraining

5 жыл бұрын

Does it? I'd be willing to bet that I can scope the pump on here quicker than you can unbolt the line holdown, get the brittle plastic clip disconnected(without breaking it) and getting a gauge on it. On a car that's easy, sure. One with a schraeder valve, sure. Something you have to hook in line with though...I don't know. Bet my tests faster. Let's do it Phillip! Make your way to Fond Du Lac, WI! We can time it :) Either way though, they are both great super valid tests!!!! Mike Becker, Senior Technical Instructor

@phillipzan2005

5 жыл бұрын

@@GoTechTraining see my second post. But don't get me wrong a current test is a incredibly value able tool. And would probably be the next tool I pulled out. But I normally don't have my scope stuff laying out all ready to hook up. Plus u have to get the diagram. Then get to the fuse or relay. Possibly the wires on some models.

@GoTechTraining

5 жыл бұрын

All valid points! Depends on ease of access of stuff for sure. Fuel pressure on many vehicles is a 2 minute test. I'm all for it. Just another box we can check of the ever-growing list :) Mike Becker, Senior Technical Instructor

U guys should to do a video about no crank no start

@GoTechTraining

5 жыл бұрын

Good idea. I''ll keep my eyes open for one! Mike Becker, Senior Technical Instructor

So by clamping an amp clamp around the fuses that feed power to injectors and coils you can tell which ones are firing and which one's arent?

@GoTechTraining

5 жыл бұрын

True, you can pick out oddball ones. Now you would need a trigger point to understand which one is MIA but it's a fantastic test. Mike Becker, Senior Technical Instructor

@jb6574

5 жыл бұрын

@@GoTechTraining would you then be able to look at just one coil by amp clamping around the power wire of a single coil?

@GoTechTraining

5 жыл бұрын

Not usually. Most of the time the coils all use a shared power circuit. You could look at the individual ground feed current if the drivers in the PCM. If it's a smart coil you won't see much for current on the signal circuit from PCM to coil. Mike Becker, Senior Technical Instructor

Way to go . Have intermittent No Crank No Start on CLK 220 Cdi Auto car runs well smooth Tick over but can suddenly cut Engine while driving.?

@GoTechTraining

2 жыл бұрын

Hey John, thanks for watching! Any trouble codes? Mike Becker, Senior Instructor

How to diagnose a crank no start no communication with one 2 ? On 07 Toyota Camry

@GoTechTraining

5 жыл бұрын

Start by reestablishing communication. Check fuses and simple things first. Many times the cig lighter fuse is tied into the power to the DLC. You blow that fuse because of a phone charger or something and you loose communication. Mike Becker, Senior Technical Instructor

I used starting fluid to see if it will start and no start. Do I still need to check fuel pressure?

@GoTechTraining

Жыл бұрын

Hey John, I don't trust that starting fluid will do the trick everytime. Maybe you could move the fuel test down your list of diag but I wouldn't go saying fuel is ok yet. ~Mike

@kierandaniels9628

Жыл бұрын

@@GoTechTraining The u

Ignition lights not coming on

I'm have problem with the 2007 pathfinder nocrank

@tmo2798

Жыл бұрын

I have a problem with Nissan after '98 IN GENERAL. I won't buy one- unless it's just about free.

A faulty ECU may not supply spark and injector pulse signals. Replace the ECU. Been through this twice.

@GoTechTraining

4 жыл бұрын

Sounds a bit like an expensive guess on there Wayne. Spark and fuel can be disabled or not pulse for a lot of reasons. Mike Becker, Senior Technical Instructor

Hi, what about the WELLS VE channel?

@GoTechTraining

5 жыл бұрын

Hey Angel, we have stopped adding videos to WellsVE at this time. Mike Becker, Senior Technical Instructor

@raulcramirezjr7725

5 жыл бұрын

How about Dodge Dakota 3.9 1992 to fixing all kinds of engine problems that I have been dealing with please help me

Low oil pressure may also cause timing chain issues.

@GoTechTraining

4 жыл бұрын

Sure it could! Thanks for watching Victor. Mike Becker, Senior Technical Instructor

@19:45 thats some nice corrosion on the battery cable! Lol

@GoTechTraining

5 жыл бұрын

Haha, right!? Still cranks over though...looks like a future issue for sure. Mike Becker, Senior Technical Instructor

@splash5974

5 жыл бұрын

@@GoTechTraining I live in Canada, and i know you're in northern US, so dealing with the harsher winters and salt and sand on the roads, i always stay up on things like that. Battery cables and ground points, i always make sure they are clean. Just one more thing to rule out down the road. Im only 30mins into this vid right now, and id already be checking for injector pulse! Had a similiar issue couple years back, and checked everything but the inj pulse, and sure enough, injectors were not firing off...so a pcm swap got me up and running again!

@GoTechTraining

5 жыл бұрын

So true! I wish everyone thought like you! I live in Wisconsin, so very similar weather. The point of this class was to show all the different testing. It's up to the individual which path to go down first...fuel, spark, air, or compression. Mike Becker, Senior Technical Instructor

@splash5974

5 жыл бұрын

@@GoTechTraining Very good vid! But man that thing sounds funny when being cranked over... Still have more than half the vid left! Lol

@GoTechTraining

5 жыл бұрын

Enjoy! you'll understand soon enough :) Mike Becker, Senior Technical Instructor

Timing

Hey, Mike. Will a car ever run without a crank sensor?

Would you take that motor out the bottom? You should show how that's done.

@GoTechTraining

5 жыл бұрын

I believe this is a top pull engine. If it's like the 1.7L or 2.4L. I've pulled each of those out the top with the trans bolted to it. Pretty easy job really. I just finished R&R a 2.4L vtec in an 07 Accord. A little over 2 hours from start to engine/trans on the floor. And that's in my home garage lol! Mike Becker, Senior Technical Instructor

@2secondslater

5 жыл бұрын

For a manual gearbox, drop it from the bottom or pull the gearbox and engine together, there is usually not enough space between the front of the engine and the chassis rail to get clearance for the flywheel/clutch and gearbox on transverse engines. With an auto you can generally get clearance to remove the engine alone through the top.

@GoTechTraining

5 жыл бұрын

Usually I pull them together. These motors/trans come out pretty easy. Mike Becker, Senior Technical Instructor

@2secondslater

5 жыл бұрын

@@GoTechTraining yup! just depends on the situation, I generally try to keep the trans and axles in place so the car can be rolled away from the hoist or pushed outside

@GoTechTraining

5 жыл бұрын

Sure, that makes sense! Working at home, I don't have to worry about pushing stuff out. 1 project at a time :) Mike Becker, Senior Technical Instructor

lift back seat up to get to fuel pump...how hard is that?

I wonder if it is wise to use an impact on a spark plug?

@aussiegruber86

2 жыл бұрын

When you see the end of the video you can understand why he did use the impact lol

Cranking no RPM. WHAT WILL BE THE PROBLEM?

@keemdaplug5030

2 жыл бұрын

Did you find the problem?

@oscarmendoza4370

Жыл бұрын

Crankshaft sensor

Hola mike clases en español porfa

@GoTechTraining

5 жыл бұрын

Orlando, our Spanish trainers no longer with us. Sorry :( Mike Becker, Senior Technical Instructor

about fuel : isn't old bad fuel also be a factor of a no start?

what would you do without that computer?

very nice intro music dum dum .........dum-dump