You don't understand how thankful I am for this video. So many people skip over the little steps, assuming everyone knows it, but as a super beginner, I've been searching for a video like yours. Thank you!

@loudogg4945

Ай бұрын

Any more tips you’ve come across after doing these?? Getting ready to do it with an iron now!

This is the only video I found on here that’s actually helpful and I’ve been looking for weeks now on how to do this

@thecraftscraps

3 жыл бұрын

Yay!!!!!

Just made my first htv shirt with the help of your video. Came to tell you how thankful I am and looking at the comments I know I came to the right place :) thank you, thank you, thank you!

You inspired me to make my first project. Thanks for this! Excited to make a shirt for my wife. I must be one of the only straight guys that’s into Cricut lol

Thanks for this. New to cricut and this is theeeee best and most informative tutorial I've found so far. You have a new subscriber here 💛

Good to see you again Lauren.. thanks for the tutorial.

So happy that I found your video tutorial. Your instructions were very simple. I have been a cricut user for about 14 months now. I design tshirts basically for my family, especially my toddler grandchildren. I love making the tshirts but using and understanding cricut can be challenging. I just ordered the HTVRONT heat press and currently awaiting the delivery. I just wanted to understand how to use it before it arrives regarding if you still needed to mirror the vinyl before printed. Your video confirmed my thoughts. Thank you so much. Your tutorial has been the easiest to understand than most.

There are so many videos out there but by far this has been the simplest and the easiest to follow video

Thank you 🙏 so much ❤️ you helped me a lot with the HTV ❤️🇲🇽❤️ new to cricut and love to find videos like yours..

Thank you so much for making this video ! I finally made my first project ☺️ ✨

Thank you, I couldn’t understand why one of my HTV had transfer tape already on it and the other didn’t. But you made it so much clearer for me now. Thank you 😊

this was so helpful! couldn't have done it without ya

Thank you. You’re the first video that I really understood.

Thank you! I couldn’t figure out which side to put down on my cutting mat! Very helpful!

Great job as always! Very detailed . Mich appreciated

Thanks for sharing. Cant wait to do my first shirt.

This was a super helpful tutorial. Just made my first shirt. Tks

Thank you Lauren! Wish I'd had this available about 3 wks ago when I did my first shirt LOL! I've bought more HTV and am ready to make more and just got a 9x9 easy press. (I think yours is the 12x10) You asked for ideas so here goes: 1. video about how to LAYER colors with HTV (I don't want to wreck a bunch of expensive HTV). 2. making large stencils with freezer paper so I can spray paint my 14x26 sign (my test was a fail because I couldn't get it off of the mat nicely) and just ended up using a ton of vinyl. That is all I have for ideas - you are my fav Cricut instructor so keep 'em coming.

Lauren I love your videos and they are easy to follow !

@magilion860

2 жыл бұрын

Never give up sis

Thank you , just starting to do HTV , you make it look so easy

Lol you are so cool! Love your personality! I like how you are so silly haha! Always joking and not taking stuff too darn serious. Much love!!

@thecraftscraps

3 жыл бұрын

Thank you!!!!

I subbed immediately!!! Very detailed and helped me tremendously 🤠 .

Best teacher ever

Glad to see you making videos again! Can you do one of layering different color htv shirt etc?

Thank you for teaching me how to use Iron on! I’m a newbie.

Thank you so much 💓 I needed yoy in a hurry today. It worked.

Thank you for the step by step!

This video is great and I love how you explain things. You have a new subscriber! Thank you!

@thecraftscraps

Жыл бұрын

Yayyyy

Followed your vid and it really helped!! Thank you

thanks, im just startig out and this is exactly what i needed

@makeupbyemili2332

3 жыл бұрын

Omg same I get mine tomorrow 😍

Love it, Can't wait to try it. Just ordered my Cricut Explora 2 and waiting for it to get here. Your videos are fantastic Thank you for sharing

Amazing video step by step thank you so much 👍👍👍

Love the tutorial. hello from 2022 ( as im writing this )hahaha. Ive seen alot of makers used Siser and gave it a good rating. I will try that for my next press. Thank You

Thank you for the video, it really helped out for my first heat-press project. Alternatively, my eyes don't work because I constantly thought that the letters were loose and that I needed to re-heat the letters, only to realize after the third heating that they were already applied, it's just that the fabric got a little stuck. So it was good after the first or second heating, I just thought it wasn't working properly. Big "Oops" on my part. (For clarity's sake, I was using white print on black fabric which could explain the issue with depth perception).

Great tutorial! Thanks

This was so helpful

good video. Thanks for doing it.

I loved it

does it matter if you put the HTV on the mat vertical or horizontal?

Best video of seen yet thank you

@thecraftscraps

2 жыл бұрын

Xoxoxo

Best video so detailed thank you

That's amazing.

I tried to cut out my HTV 4 times and still didn't get it right until I found your video!! Fifth times a charm!!! Thanks so much!!!

@thecraftscraps

2 жыл бұрын

Xoxoxoxo

This video is amazing thank you!

@thecraftscraps

Жыл бұрын

You're so welcome!

thank you! and ps..you are adorable you remind me of my daughter!

Hi! thank you for this video... Can you tell me specifically which easyweed siser htv you used? Thanks

Thank you for this video.

thats so funny i kept reading it as homeboy too until you pointed it out haaha

I noticed you loaded the vinyl vertical vs horizontal? New to cricut does the app instruct you wich way to load for cutting?

You made me laugh so much when you said I hope I didn't write Homeboy :^)

Thanks for this GREAT tutorial!!!! TFS newbie here 🌲🎅🌲

the htv doesn’t seem to be staying to well on my hoodies is it becuz of the vinyl brand or not pressing enough?

Great vid

How did you get it to print vertically like that and not how it was shown on the screen, horizontally? That seems like it saves youore transfer vinyl

Thank youuu!!

Hey, what did you use to cut the vinyl?

Im three quarters of the way in and you keep saying center as best as I can….. folding the shirt in half and pressing that will crease your mid line for you. Also you can fold the vinyl in half and that will also show you your halfway point. Great video loving all the help!!!

very helpful

Thank you!

THANK YOU!!! thank u thank u

Thank you so much. I just did my first heart transfer on a tshirt ❤️

@thecraftscraps

Жыл бұрын

Yayyyyyyy!!

I'm new to all this, so whats the difference in iron on vinyl and heat transfer vinyl? Thank you so much for teaching us!

@thecraftscraps

3 жыл бұрын

Iron on and heat transfer are the same thing❤️

Thanks for the clasd

Omg my husband and I were about ready to throw our CRICUT out the window! You made this very simple to understand and showed step by step, now we have to order more HTV because we wasted so much.

Hi, I hope you can help me but have you tried it on a different fabrics then cotton?

Did you mention the heat settings for the press in this video? If not, what we’re they? Thanks!

Did you use a heat resistant pad?

Great video thanks this really helped 😊

@thecraftscraps

Жыл бұрын

Yay!

Hello, I’m new to your channel and thank you for your hard work on creating content for us. I wanted to know if I had to pay a subscription fee to use the program after we install it to a computer or tablet?

Can you help? I 'm printing on vinyl but the machine thinks it's a print and is looking for those side lines. I don't remember what those sensor lines are called. But it won't cut image out

On design space, do they have a holographic color for the lettering?

I really thought it said Homeboy in the beginning I died laughing when you addressed it 😂

Do you have to have that clear paper at the bottom of the letters?

Can I duplicate that and do it all at once for multiple shirts?

what type of computer do you have a where did you get it?

Does the design space software come with the circuit equipment? Or do you get it separately??

@justsaint3382

Жыл бұрын

Yes

How did you set it so that the machine can cut it sideways like that? And you didn't use a whole sheet?

loved this!

So you put the shinny side of it down on the mat?

Super awesome, I'm subscribing. Sorry you burned the finger. I was like ouuuch

What’s the heat setting on Cricut iron? How many seconds to press on?

Thank you for this tutorial! Question, how do I know what way to put the vinyl on the mat? Ex: horizontally or vertical? Does it matter?

@thecraftscraps

3 жыл бұрын

Doesn’t matter - just make sure it matches the mat in design space so your letters cut out on the vinyl Properly!

@deerock8987

2 жыл бұрын

I just got heat transfer vinyl for mug press. And I can't get the backing off without it tearing!!

“Homeboy” 😂😂😂

Do i need to spray something on 100% cotton before doing HTV?

Is it because i forgot to put my cricut on iron on it was on vinyl

hi thanks for your help! one question: how do you print out your design that you’ve created ? 💓💓 thats the part i’m stuck on

@britainylinde

3 жыл бұрын

If you want it to be one color like she did, you use cricut design space to upload a picture and load it into your cricut to cut! If you want to iron on a picture you have to get a printer and then once it prints, the cricut can cut the outline of it. Hope this helps!

Awesome video . Curious if you had anything inside the sweatshirt at all while using heat press ?.. I've never used one so have a few questions . So nervous to use one

@thecraftscraps

2 жыл бұрын

Nope!

Love it! Definitely going to use this on one of this homebody's tee!

What did you use to mark your shirt

First time using HTV when I peel it off my mat my letters are sticking to my mat! Any tips thanks!

hi, could you tell me what you did. your text was horizontal on the screen but printed out vertical. did you rotate the word before you cut it? thank you

@thecraftscraps

Жыл бұрын

Design space did it automatically since I had a larger mat!

I like it! What htv do u use?

What program are you using to write the words and choose your font?

@thecraftscraps

3 жыл бұрын

Design space

What kind of carrier sheet should I use? The same kind I use for the non-iron on vinyl???

@thecraftscraps

Жыл бұрын

HTV comes with a carrier sheet you don’t need transfer tape

Where did you buy the vinyl paper??

There are rulers for HTV. Thanks for the tutorial.

Do you have a tutorial on using 2 colors

Hello, may i know what software is that to make the name

Welcome back Lauren the sweatshirt is Great I love it did you say what the font and size of letters is I want to make Saturyay lol

@thecraftscraps

4 жыл бұрын

Font is IMPACT and the size was 15” long 3” high!

@donnaberrios7571

4 жыл бұрын

Lauren Laski thanks I’m on it lol

@donnaberrios7571

4 жыл бұрын

Is the font just impact or impacted I only see impacted thanka

Hi every time I try and heat press them the letters all crunch up do you know how I can stop this or any good htv I can use

@thecraftscraps

3 жыл бұрын

Are you mirroring your image and pressing with the carrier sheet over the actual HTV?