This just didn’t make sense before. Now I understand it. Thanks for sharing.

@DarrensWorkshop

3 ай бұрын

You are welcome Angie. Have a great day.

I had a problem using my kapex 120 regarding setting depth of cut. The manual gave clear instructions but I had misread them and this video answered my questions. Tony

Good video and good explanation of Dado cutting on the Kapex 120 REB

@DarrensWorkshop

2 жыл бұрын

Thanks for watching!

Very nice! Thank you for making this video!

@DarrensWorkshop

4 жыл бұрын

Thank you Craig. Have a great day.

Now I have another reason to sell my big Bosch Compound Miter Saw. Dadoes and accuracy. My Bosch is out between a 32 and a 64th of an inch over 11 or 12 inches. I’ve adjusted this saw until I’m blue in the face. Nice Demo thanks

@DarrensWorkshop

3 жыл бұрын

Hi Geoff. I too moved over from a Bosch, which was a good saw, but the Festool is much more enjoyable to use, and more accurate.

@davidbryanwoodworksandmore

3 жыл бұрын

It would be nice if miter saws were accurate. Sliders and non sliders. They are just not. Makita and dewalt and hitachi. But I just bought a kapex so we’ll see.

@DarrensWorkshop

3 жыл бұрын

@@davidbryanwoodworksandmore Good luck David. I have certainly found the Kapex to be more accurate than other miter saws I have used.

@davidbryanwoodworksandmore

3 жыл бұрын

@@DarrensWorkshop thanks. So far so good. I’m just using it fit the first time.

Great job!

@DarrensWorkshop

2 жыл бұрын

Thanks again Ken. Have a great weekend.

Very important it doesn't matter which machine.the best you can do buy always a Slide Compound Mitre Saw with the handle in a line above the saw blade,everything has to be in line Slide bar rails,handle,and saw blade. it's better no tilt saw blade, and engine with softstart . Handle vertical or horizontal above saw blade is okay if it is in line above the saw blade and in line with slide bar.Everything has to be in line this is important.example bosch gcm 800 sj / gcm 8 slj professiona / Evolution rage 3 / FESTOOL KS 60 / EVOLUTION RAGE R255 sms...

What dust collection setup do you have? How did you connect 2 1/2 inch hose to the dust port

@DarrensWorkshop

Жыл бұрын

Hi, I currently have one of those old 1HP bag extractors at the moment. I used rubber tape and a hose clamp to adapt the hose to the saw outlet. At some point I will get rid of this system and go to something with a HEPA filter.

Do you have a link to that kerfmaker?

@DarrensWorkshop

4 жыл бұрын

Certainly www.banggood.com/Drillpro-Table-Saw-Slot-Adjuster-Mortise-and-Tenon-Tool-Woodworking-Movable-Measuring-Block-p-1528475.html?rmmds=myorder&cur_warehouse=CN

شكرا لما تقدمه من فنون وثقافة ومعرفة(كم سعرو بالدولار)ومن الممكن أن ترسل لى واحد مثله )الدسكThanks for the arts, culture and knowledge you offer (how much are they priced in dollars) and you can send me one like it?

@DarrensWorkshop

3 жыл бұрын

Hi, You are welcome. If your after the Kapex saw, I recommend starting at Festool.com, and finding your nearest retailer. Have a great day.

@user-xf8rj4hg3w

3 жыл бұрын

@@DarrensWorkshop شكرا لك ولكن لماذا لا تجب على سوالى)كم سعرو/ومن الممكن أن ترسل لى واحد مثله @ Darren's Workshop, Thank you, but why don't you answer Sally? How much? / And you could send me one like that

@DarrensWorkshop

3 жыл бұрын

@@user-xf8rj4hg3w Hi, I sent you the details of Festool because I don't sell them or ship them. They cost $2990 AUD here

Great tool! As the blade is really irrelevant, it’s the kerf it makes that is crucial, wouldn’t you be better making a cut in timber then use calipers on that?

@DarrensWorkshop

3 жыл бұрын

Hi, I can see why you say that, It is logical, but to get a tight fit, I ended up reducing the the gap to slightly less than the blade anyway. The width of the blade should be ever so slightly narrower than the kerf. No matter how good the blade is, there is going to be a tiny bit of run-out.

@felipejaxen8369

2 жыл бұрын

i know it is kind of randomly asking but does anybody know a good website to watch new movies online ?

@phoenixfox9713

2 жыл бұрын

@Felipe Jaxen Flixportal xD

@felipejaxen8369

2 жыл бұрын

@Phoenix Fox Thank you, I signed up and it seems like they got a lot of movies there :) I really appreciate it!!

@phoenixfox9713

2 жыл бұрын

@Felipe Jaxen glad I could help :D

dado blades do exist you know

@DarrensWorkshop

3 жыл бұрын

Not every table saw will take dado blades.

Repeat after me. SAW SAW SAW there is no R in saw. It’s a saw not a SAWR

@DarrensWorkshop

3 жыл бұрын

It sounds to me like I am saying saw. Perhaps you just pronounce the W a lot shorter than I do. Now I really want to hear how you pronounce saw.

@grantskelton1219

3 жыл бұрын

That’s what our accent sounds like in Australia champ.

@chuckgrumble5440

Жыл бұрын

@@grantskelton1219 warsh yer sawr