I just don't see the "embossed" effect on the sweatshirt. Just looks like 3 thick lines of primary colors

@SiserNorthAmerica

5 жыл бұрын

It is a very subtle effect, and is difficult to pick up on camera, but it is quite unique! You may want to give it a try. Just follow the steps in the video :)

@treva9108

4 жыл бұрын

I thought it was me. 😂

@chetanchimulkar1519

3 жыл бұрын

@@SiserNorthAmerica fake. If it is literally not done then it won't be captured lol🤣

He’s so gangsta he didn’t use a Teflon sheet 🙌🏽

Can you double the brick for more 2D or 3D effect?

I didn’t know you could layer over the Brick and Stripflock like this! Thanks for the video!

@SiserNorthAmerica

6 жыл бұрын

Absolutely! Not a problem, thanks for the comment! :)

Would appreciate more vids on brick! I’d love to use it more on apparel, thanx Joe. Jerri

Awesome! Love not only the Siser Vinyl line but your instructional videos!

@SiserNorthAmerica

6 жыл бұрын

Thanks for the comment! :)

This is seriously kewl....I've gotta try this method. Thanks for sharing it.

This is a total game changer!! I can't believe I've never seen this. I will be ordering my "Brick" vinyl today. I have got to try this. Thank you so very much Joe!! I sincerely appreciate you sending me the link to this video!! 💯☝🏼👍🏼🥰🤗💖

@SiserNorthAmerica

2 жыл бұрын

You are always welcome, Lorraine!

Super cool! Can't wait to try!

Love this look, so many possibilities!

@SiserNorthAmerica

6 жыл бұрын

Thanks for the comment! We would love to see what you come up with!

Love this look! So fun! I’m going to do this with brick!

@SiserNorthAmerica

6 жыл бұрын

Thanks for the comment! :)

Please show another video to show the embossing look just like the image at the beginning of video. Maybe because the white brick 600 doesn't stand out. Thanks

@SiserNorthAmerica

Жыл бұрын

We apologize. It is difficult to see on camera, but if you follow my process, you will see the results first hand!

I realize you can't see the image because of the camera angle. Excited to try this. Can you tell me where I can get the Detroit Image??

That is cool!

I love it!!

@SiserNorthAmerica

6 жыл бұрын

This was such a fun project! Thanks for the comment! :)

Hey didn’t know you could do this!!! It’s now on my list of things to try!!! Didn’t know you didn’t need to use a Teflon sheet! Awesome video I’m officially hooked 😂

Great idea...So glad you demonstrated this combo.. However the round design shown at the beginning of the video actually appeared to better demonstrate the embossed look. The red/yel/grn one did quite achieve what you were going for...looked rather flat. But the technic is a winner!

@SiserNorthAmerica

3 жыл бұрын

Thank you for watching! It was very difficult to capture the effect on camera, unfortunately.....but, if you follow these steps, I promise you will be blown away with the results!

This is neat!

@SiserNorthAmerica

6 жыл бұрын

Thanks! :)

Thanks for the informative video!

@SiserNorthAmerica

6 жыл бұрын

Thank YOU for the comment! :)

Good information!

Make a video on how to Print and cut on the stripflock.

I appreciate the information shared Thanks

@SiserNorthAmerica

5 жыл бұрын

Glad we can help. :)

can it be applied to baseball jackets ,meaning the brick will adhere to easy weed nylon?

@SiserNorthAmerica

5 жыл бұрын

If you want to apply Brick™ 600 on Nylon material you will need to remove the water proof coating. We have a video on that here. -Austin kzread.info/dash/bejne/hpOkk8ZrmZq5ops.html

Can you do this embossed look with layering flock on brick?

@SiserNorthAmerica

Жыл бұрын

Results are not as strong but it can be done 😊

Did you forget to use the teflon sheet when repressing peeled vinyl or is it not necessary for some reason in this application?

@thgexecutor

5 жыл бұрын

some heat presses are teflon coated, thats probably what happened

can you layer the brick with another layer of vinyl to give it more of a raised effect then cover it with the stretchy vinyl.

@SiserNorthAmerica

3 жыл бұрын

If you wanted, you could try doubling up on the Brick HTV....but we are not sure how well it will all hold up in the wash :/

This is 😎

@SiserNorthAmerica

6 жыл бұрын

Thanks for the comment! :)

Hey Joe, I have that press. Where do I get parts for it :)

@SiserNorthAmerica

3 жыл бұрын

Email here: techsupport@hotronix.com

🔥🔥👍🏾👍🏾

can you use this on a cricut

@SiserNorthAmerica

5 жыл бұрын

You sure can! :)

Can you do an Emboss look with Foil?

@SiserNorthAmerica

4 жыл бұрын

If you are referring to EasyWeed Foil? then, yes! :)

I didn't see the embossed design..maybe you should've cut the easyweed stretch to overlap the brick..🤷🏾‍♂️..go info though 👍

@SiserNorthAmerica

3 жыл бұрын

The Stretch does overlap the Brick....Yes, it was difficult to showcase on screen, but if you follow the steps you will see the fantastic results!

@nyccotuscani6647

3 жыл бұрын

@@SiserNorthAmerica Thank you..I'm definitely trying this

I dont see the embossed look.

that intro...

I see u did not cover your Easyweed with parchment paper, so u really do not have to cover it??

I don't see the embossing.

@SiserNorthAmerica

4 жыл бұрын

Unfortunately, it is difficult to pick up on camera, because it is subtle enough....but, if you follow these instructions, you can see the results firsthand!

I don't see the embossed look

@SiserNorthAmerica

2 жыл бұрын

unfortunately, it was difficult to pick up on camera, but if you follow my steps, you will see the results for yourself!

Wack-ass method. Could barely see the under layer. I give this two fingers up!

I don’t see the purpose of the symbol. Furthermore, didn’t see any embossing. Bold move to press with no cover on top. Didn’t see any 2D or 3D....Can’t give it a thumbs up...or a thumbs down......

lol i think I waste 7 minutes watching this trash haha so where is the “embossed” effect? Actually I can’t see the real figure bellow these unnecessary layers

That didn't make sence

@SiserNorthAmerica

2 жыл бұрын

Any particular questions? Maybe we can help clear up any confusion.

@staceybrooks5656

2 жыл бұрын

@@SiserNorthAmerica first what was the purpose of the first round PC second it looked like you just put three color stops on top of it, which made a square. No, embossed look at all?

@SiserNorthAmerica

2 жыл бұрын

@@staceybrooks5656 the video camera didnt pick it up....this process is subtle, but the Brick 600 HTV transfer will definitely pop

I didn’t like this art work