I learned more in 4 minutes than I did watching a bunch of videos. Thank you. Plus, the host is HOT!!!

I will testify that this is truth!!! I totally ruined a T-shirt by getting my materials confused and I pressed too high for too long...but I LEARNED and that’s valuable!

@SiserNorthAmerica

4 жыл бұрын

Sorry to hear about your shirt though :/

Been trying to tell people this all week. Thanks, Joe.

@SiserNorthAmerica

6 жыл бұрын

It is our pleasure. Thanks for the comment! :)

Literally me over the weekend 😩 this is definitely the video i needed

@KarlaCamposSummers

6 жыл бұрын

The app 🤤🤯 ((I’m a newbie! So excited!))

@SiserNorthAmerica

6 жыл бұрын

Don't worry, we have all been there. Thank you for the comment! :)

This is exactly what I needed!! 🙌

I’m so glad I found your website and videos before I do my first ever project! Man there are a lot of people giving the wrong advice. Can’t wait to get started with my Cricut Maker, Easypress and what will no doubt soon be massive Siser stash! :D

So glad I found this video. I'm not going to lie I hated yalls vinyls 🥴 But I take it back now! I saw this video and realized that you guys were totally acting like me in the first few seconds lol. I thought that if I left the heat on longer and pressed hard and then threw it in the heat press machine that my vinyls would stick. And they always peeled off even before the first wash... I didn't know that you could damage the adhesive... Lol I hope you guys accept my apology 😂😂😂😂

Thanks for the info! Very helpful!

@SiserNorthAmerica

6 жыл бұрын

Absolutely! We are always happy to help! :)

We use about 175 celcius for 15 sec and medium/high pressure because we use a teflon sheet and are having the best success with that (using the same heatpress as seen in this video).

THIS IS SOOOOO GREAT. And you're super cute lol

Thank you! Great info

@SiserNorthAmerica

Жыл бұрын

You're very welcome!

Thank you, thank you, thank you! I am new to this and had no idea what I was doing. So you can imagine that I have ruined many shirts and vinyl.

@nicolejohnsonm1599

3 жыл бұрын

Me too

My friend your video is good, very clear.

@SiserNorthAmerica

6 жыл бұрын

Thank you for the comment! :)

@rosarivero34

6 жыл бұрын

Do you have a place to visit you in USA, SHOWROOM, to see and buy your stuff.

Thank you!!!

What settings do you recommend on an EasyPress 2 for applying Siser HTV on stained wood?

On a press that is used for clothing and fabric which fabric setting would the temperature range you provided be? Cotton, Wool, ...

Yeah so I did get too much pressure on a baby shirt I did yesterday. I dislike greatly this whole medium, light, hard pressure thing. Give me a numeric value and I'll buy equipment to measure it. I adjusted my heat press to what I thought was medium and didn't repeat the paper test that everyone claims is medium pressure ... still subjective btw ... and I see the glue from my top layer pressing out onto my bottom layer. Do I need to trash this baby shirt or is it likely it will hold for the 1 or 2 wears babies get out of clothes this size before growing out of them? 305* for 15 seconds easyweed on easyweed with a 5 second tack for my bottom layer before the full press on the top layer.

I expected to see some over pressed items.....thanks

Oye mi niño, tu vas a ir a Las vegas, este octubre 16,17,18,19 y 20. 2018 ?????

Are there different conditions when working with POLYESTER. I am referring to SCORCH MARKS. I've watched the STAHLS videos and they all lead to purchasing a new machine with the LOWER Platen heating element. HELP...!!!

Yesss ❤

@SiserNorthAmerica

6 жыл бұрын

YES! :)

I thought we'd get a way to fix the mistake of over pressing!!! Great info anyway.

@V3NMNINJA

3 жыл бұрын

Can’t uncook a steak but at least htv is cheap so you can get it right next time 👍🏼

@banzaisbanza

3 жыл бұрын

@@V3NMNINJA Very true! Lol 💜

Just found you, thanks for clearing things up

@SiserNorthAmerica

5 жыл бұрын

Absolutely! That's what we are here for! :)

I just printed out the PDF on application. It shows the htv stretch as requiring 320° for 20sec and a firm press. I'm using a Tusy press for application onto a Bella canvas shirt. I'm still having letters peel. Any tips for this issue. Thanks👍

@HighDesertAdventurer

3 жыл бұрын

@@tommynationofficial Don't recall when I made this comment but since then I've done what you just suggested and it works great. 👍

I have a large heat press but just how do I know if the pressure is right? I would love to know the answer to this. So far, I am just guessing. ugh

@janeenstephens906

4 жыл бұрын

Same

Can We use regular transfer tape to the htv or do we need a special kind of heat transfer tape ?

@jonathanandbethanysmith7882

5 жыл бұрын

Siser HTV (and I am 99% sure all heat transfer vinyl) has the transfer tape on the vinyl itself. You do not need to transfer it like you would with regular 651 vinyl

Hello, I have a question. I recently tried HTV on a shirt for the first time, but the vinyl came out wrinkly in certain areas. Do you know what could have caused this?

@SiserNorthAmerica

3 жыл бұрын

What vinyl did you use? If it Siser HTV, please reach out to our Tech Support at Support@siserna.com and we will try to figure out what happened :)

Thanks for this. I bought a Cricut Easy Press after winning an HTV pack from your Facebook page and their instructions say front AND back. Which I thought seemed like too much, but maybe that was for their vinyl. Or they are giving bad instructions??? Anyways, can we have more tutorials on tips for pressure using the EasyPress? I thought we need to see the impression of the fabric through the material, so have been extra pressing. I've only made shirts for my kid and myself, so not a big deal yet. Still learning!

@SiserNorthAmerica

4 жыл бұрын

We hope you enjoyed the Siser products! As for your questions, their instructions may be pertaining to their products, but we know a lot of our customers use the EasyPress but follow those same instructions with our products. We just wanted to make sure that its addressed that it is not necessary to apply that same way with Siser HTV.

@MixdJuxt

4 жыл бұрын

@@SiserNorthAmerica Glad I am learning this early on. Think there was only one I did that way. I did see something I pressed that had the adhesive come out as you showed.

Which size heat press do you think he’s using? I’m trying to figure out which one I want, 9x7 or 10x12!!!!

@shadesofhart

4 жыл бұрын

15x15 would be best to start with

after applying the vinyl to cotton shirts is there a suggested waiting period before washing the shirt?

@SiserNorthAmerica

3 жыл бұрын

Yes! You want to give your garment at least 24hrs, after you pressed your HTV, before you wash it.

How can you tell if you applied too much heat to a tshirt?

Why is my HTV so stiff? What HTV you recommend for a soft, stretchy almost rubber feel? The one I’m using (easy peel) feels really stiff.

@SiserNorthAmerica

2 жыл бұрын

Have you tried Siser EasyWeed Stretch?! www.siserna.com/easyweed-stretch/

What heat press do you recommend.

@SiserNorthAmerica

5 жыл бұрын

We always recommend the red press as a great starting press

Is a second press required? i have been doing a second press for 10 seconds after peeling at a first press of 15 seconds.

@rachelsrandoms1670

2 жыл бұрын

I'm not sure if it's he's for all but the vinyl I have says do a 3 second press after I peel

If the adhesive oozes out a lil will it fall off when you wash it?

@SiserNorthAmerica

Жыл бұрын

You may have pressed it too much.... you may not have an issue with it though.

I purchased a svg . A portion of the number adheres and a part doesn't . How do I get it to stick so when I wash it doesn't peel?

@SiserNorthAmerica

3 жыл бұрын

Hello Nicole! You should definitely give our Tech Support a call at 586-203-8171 so we can figure out what is going wrong! :)

My question is regarding Reflective heat transfer sheet. The problem is once its washed, looks like the print is loosing its reflective ability (NOT peeling off, print area is intact still) Is it due to washing conditions or it isn't pressed properly? I think I press it like 3 to 5 sec, should I press for 10-15 sec to avoid it? Or its just due to wash?

@SiserNorthAmerica

2 жыл бұрын

It could be how it is washed! Please email our Tech Support at Suppport@siserna.com

What do you do if half of the logo peels fine but then the last part of the vinyl is pulling up??

@SiserNorthAmerica

3 жыл бұрын

This means that you are getting uneven pressure somewhere...You need to make sure the area you are pressing on is even and flat. If you are using a home iron or an EasyPress, you have to make sure you are still using force to press down. This could also mean that your iron is not getting to the correct temperature.

I wish I would have seen this before I did my shirts. Unfortunately, I was the guy at the beginning. :( I’ve been using Cricut HTV and there you have to press at 330 minimum so I assumed it was the same thing

@flakahdz2086

3 жыл бұрын

SAAAMEEEE 😭😂 LMAO

I over heated my holgraphic, it's buckled now. Can i fix it or peel it off ?

@SiserNorthAmerica

Жыл бұрын

VLR would be the best way to get it off to fix :)

Hello. First, thanks for this video. Second, please tell me how can I prevent my HTV from buckling once I put on my shirts. I use my easy press, stretch htv, a portable table and press pad. It presses beautifully but once I put on the shirt it buckles around my breast area. Should I stretch out the shirt first? Thank you kindly in advance.

@SiserNorthAmerica

5 жыл бұрын

Stretching the shirt is causing the buckling....unfortunately, once you stretch the garment with the EasyWeed Stretch, it is going to cause that "ripple" look. You can repress is to take out those wrinkles.

I don’t know why it can’t just be written on the paper insert that is wrapped in the roll. It says absolutely nothing about temp and that makes no sense.

Can you show what htv looks like if overheated? Mine doesn't stick all the time and I can't tell if it was overpressed or under.

@SiserNorthAmerica

2 жыл бұрын

You can see when its over heated...it usually looks weathered and warped. The adhesive tends to evaporate and you lose its bond. Not all scenarios looks exactly the same. You can always reach out to our Tech Support by email Support@siserna.com and we can assist you with any Siser HTV you may be having issues with :)

Yup did it the other day with my second time doing it lol I have purchased an easy press 2

@SiserNorthAmerica

5 жыл бұрын

We have all been there before!

@ednarociosutasepulveda8995

4 жыл бұрын

🙋‍♀️

Pineapple!!!!! 😯😍🍍

@SiserNorthAmerica

2 жыл бұрын

What happened with the pineapple?!

Help! I have messed up multiple shirts. I applied htv for 10 sec. At 305 with a cricut heat press and my htv looks like it sumgged. Idk what I'm doing wrong.

@SiserNorthAmerica

2 жыл бұрын

Hello Aimee! Please reach out to our Tech Support by emailing Support@siserna.com and we will help figure out what went wrong :)

Do you recommend to start over if I over pressed a shirt?

@SiserNorthAmerica

3 жыл бұрын

It may be a good move....you can test the durability by performing a wash test or two.

@jaylinhernandez9357

3 жыл бұрын

@@SiserNorthAmerica awesome! Thank you so much !

That's me!!!!Lol

Hi i unfortunately got the white around my design is there a way to remove it

@SiserNorthAmerica

3 жыл бұрын

lay an old piece of cotton garment over it and press it on your heat press or home iron....the cotton will draw the adhesive ring around your design.

Any reason the vinyl sticks but the actually plastic won’t peel???

@SiserNorthAmerica

4 жыл бұрын

hmmmm....not sure what that could be! Please feel free to reach out to our Tech Support at Support@siserna.com and we can help you out!

It should be called the application zone!! 😂 😆 😝 just sayin!

I can't seem to transfer metallic HTV well

@SiserNorthAmerica

2 жыл бұрын

You have to wait until its bitter cold to peel the carrier! Please feel free to reach out to our Tech Support by emailing Support@siserna.com and we can help you further :)

is a teflon sheet even worth it?

@SiserNorthAmerica

3 жыл бұрын

you can just use parchment paper if you'd prefer.

What it you have a cheap heat press

@doen.8724

3 жыл бұрын

@@tommynationofficial Just my thought…but temp guns are not very accurate when reading shiny metals. It might be better to quickly measure the fabric after applying the heat.

Please show some wash results using the different machines to validate your claims. I've seen testing and wash results from other companies that provide different information then what is in this video.

@SiserNorthAmerica

5 жыл бұрын

Hello Kristy! Please contact us at support@siserna.com to see our wash test results. :)

Was expecting a transfer to a shirt

@SiserNorthAmerica

2 жыл бұрын

We have a ton of videos on our page showing proper transferring to a shirt! :)

LOL Yes ---- Guilty!!!!

@SiserNorthAmerica

6 жыл бұрын

Don't worry it happens to all of us.

You have great info but u need a new intro lol

65% polyester/35% twill weave I am having HTV issues with this blend on aprons not sticking (..... Can you suggest the vinyl I should be using? I was using easyweed everyday iron on strong blend

@compton420

4 жыл бұрын

Probably need more pressure